gcsupraman
ArboristSite Operative
Need an 028 Super Cylinder....the saw took a tumble and broke several cylinder fins
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
there you are greg! LOL... Hey I am going to check with my neighbor... I know he has a 028 super and a parts saw. If his parts saw is a 028 super I might be able to fanagle the cylinder off him... If someone else has one readily available that might be a better option... He's kinda a crusty old coot and likes to keep all his stuff...
Work Saw Collector
GTG Coffee Maker
Thats funny cause now I'm short a 064, but was kind of thinking of you when I traded for it.
redneck51587
ArboristSite Operative
011avt
jimbo1490
ArboristSite Guru
I have nearly complete handles for the AVT version, missing some internals. The trigger lockout (presence lever) in particular is hard to come by and the mechanism will not work without it. Let me know what you need.
Jimbo
i really really need a top handle and hd filter for an 066. got a few parts and a few dollars to trade. i had one coming from stumpy but after his recent misfortune i need to look else where so i can get this finished and sold.
Last edited:
komatsuvarna
Arboristsite MVP
Trade?
You wanna sell it straight out Terry, or you be interested in doing some trading on a fresh clean ms460?
You wanna sell it straight out Terry, or you be interested in doing some trading on a fresh clean ms460?
Last edited:
sent you a text
Stumpys Customs
Stumpbroke
Sorry Terry.:msp_unsure:
Work Saw Collector
GTG Coffee Maker
I have a half wrap, I'll have to go look for the filter.
Chris J.
Addicted to ArboristSite
Apologies aren't needed, Stumpy, after what you've been through.
fearofpavement
Trying them all
parts for Husqvarna 51/55
Have a Husky 55 and looking for the clutch cover, chain brake handle and assembly. The cover I have is ok but the brake handle is broken and the brake band is missing. Not sure if the other internal parts are ok. So I may be able to get by with a handle and band. This saw was made in 1998. [email protected]
Have a Husky 55 and looking for the clutch cover, chain brake handle and assembly. The cover I have is ok but the brake handle is broken and the brake band is missing. Not sure if the other internal parts are ok. So I may be able to get by with a handle and band. This saw was made in 1998. [email protected]
C7W
ArboristSite Member
MS260 Crank shaft
Hey Everyone,
Today I made a major mistake and torqued the nut on the flywheel... it torqued off the threads on the crank shaft... it's a good cm shorter now. It looks like I need to replace an MS260 crankshaft. Does anyone have any insight or have one laying around for a reasonable price? Thanks,
Rob
Hey Everyone,
Today I made a major mistake and torqued the nut on the flywheel... it torqued off the threads on the crank shaft... it's a good cm shorter now. It looks like I need to replace an MS260 crankshaft. Does anyone have any insight or have one laying around for a reasonable price? Thanks,
Rob
mp5n
ArboristSite Operative
Need an assortment of Stihl screws
I ran across a few Stihl parts saws I'm going to put back together, but I'm missing a bunch of screws. Anyone have a good assortment we can make a deal on? I've looked at ebay, but would rather do something with someone from this site.
Please PM if you can help.
Best regards,
MP5N
I ran across a few Stihl parts saws I'm going to put back together, but I'm missing a bunch of screws. Anyone have a good assortment we can make a deal on? I've looked at ebay, but would rather do something with someone from this site.
Please PM if you can help.
Best regards,
MP5N
plumbcrazyjr
ArboristSite Operative
Ive got a dolmar 133 topend it is used but no damaged in anyway the saw ran fine before it got upgraded I want 100.00 for it or trade for ?
all the proceeds will got to stumpy to help with recovery
all the proceeds will got to stumpy to help with recovery
PA Plumber
Addicted to ArboristSite
Looking for a Meteor or Episan Cylinder kit for a Husqvarna 359.
Have a few wax rings to trade, and an old plunger that only has a couple of cracks in it. Oh yeah, I have some saw stuff too.
I've also got a couple of pretty cool 1/2" MIP all brass boiler drains. One has a brass cast partridge for the handle and the other has an all brass cast whale for the handle. Can post pics if someone is interested.
Have a few lbs of old brass and copper, but the shipping would be ugly.
Have a few wax rings to trade, and an old plunger that only has a couple of cracks in it. Oh yeah, I have some saw stuff too.
I've also got a couple of pretty cool 1/2" MIP all brass boiler drains. One has a brass cast partridge for the handle and the other has an all brass cast whale for the handle. Can post pics if someone is interested.
Have a few lbs of old brass and copper, but the shipping would be ugly.
ChainsawmanXX
Addicted to ArboristSite
Hey guys im looking for an oiler spur for a 020 super. It needs to be 3/8 
thanks!
Sent from my LS670 using Tapatalk
thanks!Sent from my LS670 using Tapatalk
ChainsawmanXX
Addicted to ArboristSite
I have little to trade, but do have some crusty green paper!
Sent from my LS670 using Tapatalk
Sent from my LS670 using Tapatalk
ChainsawmanXX has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
I was trying to message you about parts I have for you and anything else you needed.
ChainsawmanXX
Addicted to ArboristSite
It should be good now jacob, im still learning this taptalk? Lol
Sent from my LS670 using Tapatalk
Sent from my LS670 using Tapatalk
