Swap meet...

[Bowtie]

Stihl 064 parts

Trying to revive a severely abused 064. I am looking for:

tank handle (might have one from Jacob J.)
PTO crank bearing
HD filter setup (worth a try)

Anything else 064/066.

I have a NOS OEM 044 piston with OE rings and clips, and or cash if I can find a deal.

 

[jimbo1490]

MS260 Crank

Does this differ in any way from the 024 Super/ 026 crank? If not, I've got one with good bearings attached.

Jimbo

Hey Everyone,
Today I made a major mistake and torqued the nut on the flywheel... it torqued off the threads on the crank shaft... it's a good cm shorter now. It looks like I need to replace an MS260 crankshaft. Does anyone have any insight or have one laying around for a reasonable price? Thanks,

Rob

 

[jimbo1490]

PTO Bearing

I've got your bearing with a good seal, too.

Trying to revive a severely abused 064. I am looking for:

tank handle (might have one from Jacob J.)
PTO crank bearing
HD filter setup (worth a try)

Anything else 064/066.

I have a NOS OEM 044 piston with OE rings and clips, and or cash if I can find a deal.

 

[southbound]

I'm looking for a 064 top cover, the grommet in the tank that connects to the 3 screws on the carb and a half wrap handle bar...

again some 034 stuff and moldy green paper...


Thanks............

 

[Arrowhead]

Looking for a good top end for a Dolmar 111i and a clutch cover.
Also need an air filter cover for a Homelite 240 and a clean clutch cover for a Power Mac 310/340.

 

[Bowtie]

Looking for a good top end for a Dolmar 111i and a clutch cover.
Also need an air filter cover for a Homelite 240.

Cant help ya there but your parts went out in the mail today.

 

[terry2tmd]

Made a hard decision

View attachment 210741View attachment 210742View attachment 210743View attachment 210744View attachment 210745
I been struggleing with this for a while, but I don't use it any longer, and it is time to clear storage space I had a self ported cylinder on it, but decided that a 2100 ran well enough stock, so I replaced the Ported cylinder with a new stock cylinder, I traded the ported one for(Hope that makes sense), this is a runner and has been my love for a long time, but it's time for a change seriously.
I wanna do a saw trade, I am ideally looking to trade everything for a used but running Stihl 066, but am beginning to think I would be just as happy with a solid 046. Now there is nothing wrong with this saw other then is has been setting for a while and will probably need a new fuel line the oil pump is weak and she leaks a little(it was all on my fix list before I went back to work) just didn't get around to fixing her.
Not being rude, but I am looking for a upper mid class, to large displacement pro grade saw, no house saws, and please pm me only if you wanna trade, you get the saw, and enough parts to probably assemble another. Everything in the pictures and I want to get rid of all of it so I really am not interested in parting it out, kinda like to keep it all together, tough decision but time to change things up a bit I will consider all brands, just I would prefer Stihl.

 

[Modifiedmark]

View attachment 210741View attachment 210742View attachment 210743View attachment 210744View attachment 210745
I been struggleing with this for a while, but I don't use it any longer, and it is time to clear storage space I had a self ported cylinder on it, but decided that a 2100 ran well enough stock, so I replaced the Ported cylinder with a new stock cylinder, I traded the ported one for(Hope that makes sense), this is a runner and has been my love for a long time, but it's time for a change seriously.
I wanna do a saw trade, I am ideally looking to trade everything for a used but running Stihl 066, but am beginning to think I would be just as happy with a solid 046. Now there is nothing wrong with this saw other then is has been setting for a while and will probably need a new fuel line the oil pump is weak and she leaks a little(it was all on my fix list before I went back to work) just didn't get around to fixing her.
Not being rude, but I am looking for a upper mid class, to large displacement pro grade saw, no house saws, and please pm me only if you wanna trade, you get the saw, and enough parts to probably assemble another. Everything in the pictures and I want to get rid of all of it so I really am not interested in parting it out, kinda like to keep it all together, tough decision but time to change things up a bit I will consider all brands, just I would prefer Stihl.

An I missing somthing, like a picture of a complete 2100 to go with those parts?

 

[Mastermind]

An I missing somthing, like a picture of a complete 2100 to go with those parts?

I was thinking the very same thing... :msp_confused:

 

[sefh3]

An I missing somthing, like a picture of a complete 2100 to go with those parts?

I was thinking the same thing. Especially wanting a running 046 or 066????

 

[turtle561]

i need a air cleaner cover w/knob for a stihl ms 361.
i am looking for a clutch cover and top cover for a husky 2100 to complete it. hey, it's not a PM ! LOL

 

[Modifiedmark]

Especially wanting a running 046 or 066????

My point exactly but didnt want to say it. :hmm3grin2orange:

In fact it should be a very good above average 2100 to make that deal.

 

[surfincr]

looking for a plastic tank handle with buffers, and plastics for an 028wb, at the very least i really need a set of av buffers i have an 045/056 new oiler, 031 clutch drum, 031 oiler, 045 clutch with brakes minus one spring and of course cash.

 

[woodgrenade]

I'm looking for a gently used 365 piston/ring. Hopefully some of you guys have some laying around after changing over to 372 top ends. I don't have anything to trade but I do have some green. Thanks!!!! :msp_smile:

 

[MnSam]

Looking for a poulan pro 295 clutch cover (or similar model that would work). For $$

 

[Tree Wacker]

Looking for a poulan pro 295 clutch cover (or similar model that would work). For $$

i might have one but not sure i'll have to look.

 

[tbone75]

This may be a tough one to find? I need a set of rings for a P62 .Sent Rott. place a email but they don't have any listed. Anyone have a set they would be willing to part with? TIA

 

[cutforfun]

looking for some parts for a stihl 038, tank, airfilter and airfilter cover. some stuff to trade and geen backs

thanks

 

[kev1n]

This may be a tough one to find? I need a set of rings for a P62 .Sent Rott. place a email but they don't have any listed. Anyone have a set they would be willing to part with? TIA

Not to tough to find, here you go. I'm 90% sure these are the rings your looking for, maybe somebody can confirm it. Jacks Small Engines Search

 

[DSS]

This may be a tough one to find? I need a set of rings for a P62 .Sent Rott. place a email but they don't have any listed. Anyone have a set they would be willing to part with? TIA

Where'd you get a P-62? Does this mean I don't have to leave the dog tied to mine anymore?