Swap meet...

[Madsaw]

Its a 2 piece black top.I know one off a 115 fits.Just got one of them! LOL

Come to think of it I may have a black air filter cover off a 2 piecer too. I will look later today.
Bob

 

[tbone75]

Come to think of it I may have a black air filter cover off a 2 piecer too. I will look later today.
Bob

Thank you very much!

 

[jimbo1490]

I could use some crank bearings for a 066.

Only the clutch side is special; the other one is just a 6203 which you can get anywhere. I have a couple of good used clutch side bearings.

Jimbo

 

[o8f150]

i have an eager beaver,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,:hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:,,sorry i had to start it that way,, anyway i have an eager beaver 2014,, it is in good shape except that the coil is bad and needs fuel lines, has a 14" bar,, if anyone wants it they can have it for the shipping costs,,,,

 

[tbone75]

i have an eager beaver,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,:hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:,,sorry i had to start it that way,, anyway i have an eager beaver 2014,, it is in good shape except that the coil is bad and needs fuel lines, has a 14" bar,, if anyone wants it they can have it for the shipping costs,,,,

That is just mean to give that to someone! :hmm3grin2orange:

 

[rms61moparman]

i have an eager beaver,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Reckon it can handle a 20 incher?


Mike

 

[o8f150]

Reckon it can handle a 20 incher?


Mike

if you are talking about tbone then you must mean 20 cm

 

[o8f150]

That is just mean to give that to someone! :hmm3grin2orange:

its either the eager beaver,, i wore her out,,,, or my good running 288xp,,, it was a hard choice that the beaver has to go,, moving on to not so eager beavers that are younger

 

[tbone75]

its either the eager beaver,, i wore her out,,,, or my good running 288xp,,, it was a hard choice that the beaver has to go,, moving on to not so eager beavers that are younger

Moving up to a 400 lb snackie?:hmm3grin2orange:

 

[tbone75]

if you are talking about tbone then you must mean 20 cm

It makes me happy :hmm3grin2orange:

 

[o8f150]

Moving up to a 400 lb snackie?:hmm3grin2orange:

nope,,,425

 

[Jon1212]

I am in need of a 20" 3/8 .050 bar for my freshly Mastermooberized Husky 261. It seems the USPS let the bar escape from the box. I have electronically transmitted folding money to trade.

 

[little possum]

So subhunter is looking for a tophandle for a 272. And I found what I believe may have been one. But no part number? Any of you guys know how to tell for sure?

 

[Modifiedmark]

Got a 920 project and could use a outer bar plate, a pair of bar nuts and a pair of bucking spikes. I could also use a decent 930 style top cover.

Let me know what you got and what you need in trade.

Bumping before it gets buried.

 

[rupedoggy]

So subhunter is looking for a tophandle for a 272. And I found what I believe may have been one. But no part number? Any of you guys know how to tell for sure?

Yea put it on a 268 and check. LOL

 

[jbird77]

jonsered 2071

Well i got a problem. I hope one of u might be able to help . I need the pin that the knee join sets on for the chain break it is in the case .. jonsered 2071

 

[Jacob J.]

Well i got a problem. I hope one of u might be able to help . I need the pin that the knee join sets on for the chain break it is in the case .. jonsered 2071

I think I can supply that. I have a pile of broken 371/372 case halves. Do you want that right away? I can tape it to a piece of card stock and
put it in a regular envelope and send it your way.

 

[Lockgessner]

181/281/288 and 064

181/281/288 looking for a nice crankcase, av housing and possibly a clutch cover.

064 looking for a starter cover complete, dust cover and ignition coil

Cash or I have some 272 stuff i might part with.

Thanks,

Lock

 

[SawGarage]

Well i got a problem. I hope one of u might be able to help . I need the pin that the knee join sets on for the chain break it is in the case .. jonsered 2071

I think I can supply that. I have a pile of broken 371/372 case halves. Do you want that right away? I can tape it to a piece of card stock and
put it in a regular envelope and send it your way.

Hi JJ,

I sent Jay (jbird77) the 2071 saw, and unbeknownst to me, the pin was compromised... I, of course, sent my spare pin off to another member, so I am unable to help

We spent a few minutes on the phone tonite going through the brake components and assy trying to figure out why it was malfunctioning after dis assembly for a GOOD cleaning..

Now we know why

Thanks....

 

[jbird77]

I think I can supply that. I have a pile of broken 371/372 case halves. Do you want that right away? I can tape it to a piece of card stock and
put it in a regular envelope and send it your way.

Iam sure u would know i didnt know if they were the same or not , I would like one yes sir , please and thank you .