Swap meet...

[Arrowhead]

Ed- I have one of those holding a tarp down on my firewood pile. I'll gladly give you the clutch off it and any other parts you need.

That's what most people around here use them for also. My friend want's it for a back up for his Poulan 2150. Seriously.

Still have my info? or do I need to send it.

 

[Jacob J.]

That's what most people around here use them for also. My friend want's it for a back up for his Poulan 2150. Seriously.

Still have my info? or do I need to send it.

I have a 4' x 5' banner with the names and addresses of around 100 AS members taped to the ceiling of my living room. I think yours is on there.

 

[Arrowhead]

Also needing a brake handle for an 084.

Got stuff to trade.

 

[Jacob J.]

Also needing a brake handle for an 084.

Got stuff to trade.

If no one else speaks up, it's still possible to order a new one through a dealer.

 

[zogger]

I need a clutch assembly for a Plastic Mac Cat Eager Beaver boxstore type saw. I'll check the model number in a few... I'm thinking 2014??

Have a small mountain chain of parts 4 trade.

EDIT>>>> It's actually a MAC 3200. They made a bazillion of these under different names. This one is rare... it has spark and a non rotted primer bulb. :msp_w00t:

I got two of them running pretty easy. They aren't *that* hard to work on. They cut good too. No antivibe, but for a small saw you can get for free or ten bucks, hey, works.

edit: whoops! You just don't have the clutch stuff, or what you have is broken? I have one parts mac in a box. It says fr2.1, enthusiastic kitty, on it..it is similar but not exactly like my 3216 models. You just need clutch and spur and bearing?

 

[blsnelling]

Anyone got a decent small mount Husky bar in 3/8 .050? Please PM me.

 

[Jacob J.]

edit: whoops! You just don't have the clutch stuff, or what you have is broken? I have one parts mac in a box. It says fr2.1, enthusiastic kitty, on it..it is similar but not exactly like my 3216 models. You just need clutch and spur and bearing?

I think I have Ed covered here.

Anyone got a decent small mount Husky bar in 3/8 .050? Please PM me.

How long?

 

[dh1984]

Anyone got a decent small mount Husky bar in 3/8 .050? Please PM me.

i got a oregon bar here that is a 16 inch 3/8 .50 gauge that came off a husky 41. but the part number is A041 Rs it in great condition but got a little wear on it. but if you think it will work let me know

 

[epicklein22]

Anyone got a decent small mount Husky bar in 3/8 .050? Please PM me.

Forester/Alborn was running a sweet deal on close out windsor bars. I snagged a 16" 3/8 .050 on the cheap. Maybe try a dealer on here for a bar.

 

[bplust]

Anyone got a decent small mount Husky bar in 3/8 .050? Please PM me.

Pretty sure I have one. I'll get back to you in an hour or so.

 

[Jon1212]

Anyone got a decent small mount Husky bar in 3/8 .050? Please PM me.

Brad,
I sent you one of those dadgum PM thingy's.

 

[fastLeo151]

I am looking for a 038 intake boot clamp.

 

[dh1984]

anyone need any homelite super 2 parts? i going to morrow and pick up a some brand new parts. and i also going to have ryobi parts as well but mostly weed eater parts i think but not sure. let me know if anyone needs anything. i know for sure they will be some new pistons and carbs for the super 2's but i don't know about anything else.

 

[Tree Sling'r]

Anyone got a decent small mount Husky bar in 3/8 .050? Please PM me.

I have a new 20" Windsor Brad 3/8 .050

I want $1,000,000 for it, plus $500,000 shipping.

 

[mtnwkr]

Looking for old style brake/parts to add to an 028wb that didn't come with one. Please let me know if you can help me! I need to make my saw safer! Thank you! Josh


I'd like to share this with you all.. Free online shop manuals for just about everthing with an engine! hopefully someone will appreciate my generosity and help me find my parts!

Go to EBSCO Publishing Service Selection Page

login: marshall
Password: public

Chainsaws are under small engine section.. Also has manuals for just about every car/truck/lawnmower/snowblower/boat/etc ever made!

 

[nstueve]

need 029-039 flywheels!

I have 3 029-290-039-390 310 flywheels and all of them have their key sheered off! SO....

I need a couple!

PM ME if you have any!

Thanks,
Nathan

 

[Jacob J.]

I have 3 029-290-039-390 310 flywheels and all of them have their key sheered off! SO....

I need a couple!

PM ME if you have any!

Thanks,
Nathan

You can use those flywheels even though the cast-in key is sheared off. Just take a fine-tip sharpie and mark the timing
on the top of the flywheel and line that mark up with the groove on the crank and tighten it up. The key is only there to
keep the flywheel lined up while you tighten it down. It serves no structural purpose.

 

[Mastermind]

A real loong shot but what the hell.....

I'm on the hunt for a Partner P65 in repairable condition.

I would trade a ported 036 for the right saw.

 

[Warped5]

lookin' for air filter for poulan 4200/4400/4900/5200/5400 in good shape. Have stuff to trade or ca$h. Please pm me, this thread moves pretty fast. Thanks!

bump

 

[Duke Thieroff]

A real loong shot but what the hell.....

I'm on the hunt for a Partner P65 in repairable condition.

I would trade a ported 036 for the right saw.

I have one, but it ain't going no wheres.....you'll understand why if you get one.

bump

Help this fella....


Any interest in these?

Both will run, but need carb/fuel line work.

The top one is actually built by Alpina.

Chris