Swap meet...

[Bowtie]

I have a recoil for a 200t if anyone needs one.

Bowtie, what do you want for the 044 builder? and what is it missing?

I will make a list and shoot a few pics and send to you tomorrow.
Off top of my head:
Piston kit
top handle
muffler cover
carb
air filter
Some screws and misc other stuff, but the big parts listed here.

 

[blsnelling]

I'm looking for a few items. PM me if you have anything. Thanks.

1. OE 346XP cylinder, piston too if you've got a good one. I don't mind a scored cylinder if it can be cleaned up.
2. 066 case, or even a good flywheel side half. Late model poly flywheel saw.
3. 066 half-wrap handle.

 

[Madsaw]

Would like to thank Bowtie for the 365 PC swap we did. Sorry I did not get back to you sooner about getting it. It looks great. So, some night after milking I am going to put the saw back together.


If anyone is looking for 029/290,310,390 parts. I have a few parts saw in the shop. No good P & Cs in the lot though. Some good cover and tank assemblies left.
What I am looking for. Some good reloadable 44 mag brass, als if by chance anyone has any 7mm Short action ultra mag brass too(7 SAUM). I traded for a rem 700 in the 7suam. Great cartridge but not cheap to shoot.
Also a PC for a 261 and carb for the same saw.
Thanks
Bob

 

[Arrowhead]

I will check on the 44. mag brass for you tonight.

 

[Bowtie]

Would like to thank Bowtie for the 365 PC swap we did. Sorry I did not get back to you sooner about getting it. It looks great. So, some night after milking I am going to put the saw back together.


If anyone is looking for 029/290,310,390 parts. I have a few parts saw in the shop. No good P & Cs in the lot though. Some good cover and tank assemblies left.
What I am looking for. Some good reloadable 44 mag brass, als if by chance anyone has any 7mm Short auction ultra mag brass too(7 SAUM). I traded for a rem 700 in the 7suam. Great cartridge but not cheap to shoot.
Also a PC for a 261 and carb for the same saw.
Thanks
Bob

Glad it worked for you!!

 

[litefoot]

I picked up a 064 project saw and am in need of piston and cylinder as well as a carb. Will trade green rectangular paper.

I'm building a saw to replace the raffled off 660.

Thanks!

 

[dragrcr]

what about a 066BB from baileys? there are some threads about it already, seems to be a good setup. I might have some other parts if you need them...

 

[StihlGuitar]

Looks like Wess I struck a deal for the 044 jug I need. Still need a 036 jug and 372. Lets do some wheeling and dealing.

I wanna have a 70cc shoot out when I get the 044 and 372 done. Gonna those up against a 7901 and 460.

i've got an 036 pro jug that looks pretty good.

 

[StihlGuitar]

i have quite a list of things I need for an 036 Pro I am building. Here goes.

Rubber decomp shroud
throttle trigger pin
the safety interlock trigger
rear handle cover
chain brake band, chain brake springs, and the master spring
starter rewind spring, pawls, and washer
2 brake bolts that go through the chain brake handle and the starter cover (cup washer and bolt one piece)
muffler cover

I have 028 parts, some 026 parts, an old smaller Homelite saw that would run, a Remmy SL-9 that could run, and cash.

Bowtie, throttle trigger pin, safety interlock trigger, and rear handle cover are interchangeable with your 026. Even if i can't dig up an entire parts saw, i have chain brake band, 026 chainbrake spring is the same (I'm almost certain, if not, I have one for you.) I probably have the chain brake bolt too. Does your 036 crankcase have the large recoil screws (same diameter as cylinder screws) or the smaller ones (like chain brake cover screws)?

 

[squish9173]

i have a 266se(no bar),& a 2100cd (no bar).im looking for a 346xp or a 371xp.anybody interested?

 

[Saw Dr.]

i have a 266se(no bar),& a 2100cd (no bar).im looking for a 346xp or a 371xp.anybody interested?

Lets see some pics of the 2100

 

[smilin possum]

Old Monster

Hey guys looking for anything to do with a Disston Mercury DA-211.
Longer bar, any kind of manuals or paper work, or spare parts. A parts saw even. Anything would be great. Also looking for a KB7. Cash Or trade.
Thanks,
Joe

 

[litefoot]

I picked up a 064 project saw and am in need of piston and cylinder as well as a carb. Will trade green rectangular paper.

I'm building a saw to replace the raffled off 660.

Thanks!

Update, I found a carb, but still looking for a piston/cylinder. I have some 034 Super parts and 064 parts for full or partial trade.

 

[breymeyerfam]

looking for 044 carb and a 044 intake boot(or 038 boot) and the sleeve that retains the boot towards the carb. (basiclly all the crap for an 026 carb swap) and yes I know the 044 boot is too big for the 026 intake...

 

[bowtechmadman]

Stihl 041 (good shape) and 026 (excellent) up for trade. Looking for running Partners, possibly Dolmar/Makita's, and of course interesting Husky's.

 

[breymeyerfam]

Stihl 041 (good shape) and 026 (excellent) up for trade. Looking for running Partners, possibly Dolmar/Makita's, and of course interesting Husky's.

no parters, but a pioneer 1074 runs, minus air filter and cover

 

[kev1n]

trade my soul

looking for mcculloch part number 55067c carb diaphram or a (nos) mcculloch carb with primer on side for a model 1-76. i will trade my soul for this or mcculloch parts.


i have a some timber bear parts, titan 40 parts, eager beaver parts,homelite c5 , mini mac 30

 

[Jacob J.]

looking for mcculloch part number 55067c carb diaphram or a (nos) mcculloch carb with primer on side for a model 1-76. i will trade my soul for this or mcculloch parts.


i have a some timber bear parts, titan 40 parts, eager beaver parts,homelite c5 , mini mac 30

Instead of beating your brains out trying to find Mac flatback carb kits and parts, why not switch over to a Tillotson HL with the low-profile fuel inlet? You'd get better performance and the parts would be available anywhere...

 

[cbfarmall]

Instead of beating your brains out trying to find Mac flatback carb kits and parts, why not switch over to a Tillotson HL with the low-profile fuel inlet? You'd get better performance and the parts would be available anywhere...

JJ,

How would you know what Tilly to use? I would love to replace my 890 flatback with a comparable Tilly or even larger as the 890 has a 125 motor.

Chris B.

 

[StihlGuitar]

looking for 044 carb and a 044 intake boot(or 038 boot) and the sleeve that retains the boot towards the carb. (basiclly all the crap for an 026 carb swap) and yes I know the 044 boot is too big for the 026 intake...

Mag Supply, aftermarket 038 boot, 8$. I've got 044 carbs, Walbro and Zama.