Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
wigglesworth
Booned
I've got this
and this
Both are good runners, but I have never put them to wood. Both Idle and oil like they should. the Xl has a 20" bar and the EZ a 16". The EZ is xtra nice.
I need.....
A full or 3/4 wrap for a ms 460
A MS460 piston and rings
A 28" 3003 .050 3/8 ES bar
a set of stock felling dogs for a ms 460
and of course $$
and this
Both are good runners, but I have never put them to wood. Both Idle and oil like they should. the Xl has a 20" bar and the EZ a 16". The EZ is xtra nice.
I need.....
A full or 3/4 wrap for a ms 460
A MS460 piston and rings
A 28" 3003 .050 3/8 ES bar
a set of stock felling dogs for a ms 460
and of course $$
parrisw
Tree Freak
I'm looking for Stihl bars in the 3002 mount I think, 3/8 .050 anything from 20-36", willing to trade for Husky mount bars, I have some 3/8 .058, 28" a few 33's. I also have a couple 3003 25" to trade.
Bowtie
Gearhead
Anyone have any interest in a couple good looking 032AV's that have great tags and paint? One is the chain brake version and the other is non chain brake. I have had one running and I think the other will run. Im missing the muffler for one and the fuel cap. Both are points ignition.
Last edited:
Bowtie
Gearhead
032 pics
I might have the parts if you want to finish them up.
I should have both. But the cover is a little beat if I remember. It is so rare to find one completely intact. Most people break them and then just take the entire thing off.
drill.daddy
ArboristSite Operative
klien should be the same as a 075 , i would think . if you dont have it let me know and i will do some trading with him ..
barney p.m. me bro . i think we live with in drivin distance . yo could come to my shop and i would hook you up if your close enough.
barney p.m. me bro . i think we live with in drivin distance . yo could come to my shop and i would hook you up if your close enough.
pinemartin
tightwad
I am in need of a small limbing saw, would like a 026 or a jonsered 2149-53 in good running decent condition. What I have for trade is a average condition ok running jonsered 920 with a new 28in bar/chain and a 36in bar with 2 chains. Let me know what you have to trade or green paper may take it as well. I can email pictures if interested..
I might have something that fits this bill...
pinemartin
tightwad
Muffler and shield are actually different. The tube that runs from the exhaust port to the actually muffler part is a different length (shorter) than the 075. The exit ports on the muffler are in a different position from the 075 too. Besides those few things, the 051 and 075 can swap most parts.
Does anyone have a decent set of 044/MS-440 case halves? I just need the halves, everything else is good. My flywheel side half has a substantial break.
I have some mixed matched case halves if you would like to go that route. I know it isn't supposed to be done, but I got away with it on an 034.
I think that would be fine, as long as the deck matches up that's all that counts. I have a 372 cylinder here with your name on it anyways...
Alright, I will check it out tomorrow and shoot ya some pictures. Need anything else. Have some multiple 044/046 parts....maybe some vintage stuff if I dig around.
drill.daddy
ArboristSite Operative
got a mac 440 from a freind of mine to get running again . he was complaining that the bucking spike broke on it the last time he used it , the saw belonged to a uncle of his that was very close , he just wants the saw running again , i want to try to find him a bucking spike as well , good freind of mine tryin to go the extra mile to help him out . got plent of stihl stuff to trade
Bowtie
Gearhead
I need an 036 muffler cover and the heat shield that goes behind the muffler for this pristine ass 034 Im putting a new 036 P/C on. Please help me, I have a paypal account...
↓↓ ↓ ↓ ↓ ↓ ↓ Swap of a life time!!!!! For a fuzzy feeling in your heart, help a bunch of little yooper kids get a new play ground!!!! Talk about a swap of a life time!!
Help and vote!☺
↓ ↓ ↓ ↓ ↓ ↓ ↓
Help and vote!☺↓ ↓ ↓ ↓ ↓ ↓ ↓
Trade 4 work
Need someone close to Michigan that would like to have a Mercury 2 man saw that is complete with bar chain and helper handle in trade for work on 2 and a half Homelite 17's. One of them runs but wont stay running and not sure about the other ones condition other than the piston and cylinder looks good. You can keep whatever is left out of the others parts as long as I get a running 17 back. Is this reasonable? The big Merc is going to be costly to ship I am sure. Pics on request.
Need someone close to Michigan that would like to have a Mercury 2 man saw that is complete with bar chain and helper handle in trade for work on 2 and a half Homelite 17's. One of them runs but wont stay running and not sure about the other ones condition other than the piston and cylinder looks good. You can keep whatever is left out of the others parts as long as I get a running 17 back. Is this reasonable? The big Merc is going to be costly to ship I am sure. Pics on request.
