Swap meet...

[8433jeff]

Crocs. Green. Size 11. Smell like a monkeys ass. No, I don't know where the other one is and don't want to find out.

Dh have a recent onset of a limp?

"you'll be walkin with three shoes. Two on your feet and one in your @$$."-Florence, from the TV show Good Times

 

[blsnelling]

What mount? Most RN's that I own (and have seen) are .058G or .063G. Finding one that's longer than 20" and is .050G is gonna be tough Brad.

might be easier to change the chain than find one in that gauge . i;ve got a few that are in the 20 to 24 inch range but have not checked mount and gauge.

Not in this case. It's a 72DL race chain, so it won't be replaced, lol. I have a couple .050" bars, but they're only 16". This is to go on my piped 390XP. If it's longer than 20", I'll just cut the tail to fit.

 

[paccity]

Not in this case. It's a 72DL race chain, so it won't be replaced, lol. I have a couple .050" bars, but they're only 16". This is to go on my piped 390XP. If it's longer than 20", I'll just cut the tail to fit.

i'll dig threw what i've got and let ya know.

 

[blsnelling]

i'll dig threw what i've got and let ya know.

I appreciate that!

 

[SawGarage]

Also for trade, swap, w/e... New 14in Sabre bar. Think it's husky mount???

That looks like the SMALL Homelite bars being that, IIRC, Sabre was a division of Homelite-Textron... don't quote me on that, though

Not in this case. It's a 72DL race chain, so it won't be replaced, lol. I have a couple .050" bars, but they're only 16". This is to go on my piped 390XP. If it's longer than 20", I'll just cut the tail to fit.

Brad,

Do you have a thread with the build? Did you find your cylinder???

 

[paccity]

brad, this is the shortest one i have. 23 0verall. the rollernose is different , have not seen on like it before. have a couple remingtons at 25 but there on keepers.

 

[Eccentric]

That bar's a large frame McCulloch mount Fraser (in case you didn't know already). I've seen a couple of those style RN's before. Can't remember who made them. An AS member in OZ posted pics of a similar bar made by GB a while ago. It was a thinner, 'modern' looking bar...........and I think it was in the large Husky mount.

 

[nstueve]

That looks like the SMALL Homelite bars being that, IIRC, Sabre was a division of Homelite-Textron... don't quote me on that, though

Ok... anyone need a small homelite mount??? I have ZERO homelites to use this bar on! Someone please take it off my hands and out of my garage!

 

[Uncle Rico]

I'm looking for a starter pawl for a Husky 185CD. I'm hoping that it's interchangeable with a pawl from a 181, 285, 1100, etc. I could be wrong. If anyone is interested in the 185CD itself, let me know.

I have a few parts and bars to trade, or cash.

 

[redray46]

Stihl 024 /.325/16" bar needed

I am setting up a nice 024 for a neighbor,who has loaned me his splitter a number of times.The saw is in great shape but needs a new 16" bar @.325 pitch.Anyone have a good looking one to spare??
Second request is for me,I am looking for a tank and handle for an o44,needs to be functional,not concerned if it is faded/discolored etc.
I have lots of Stihl 028 parts,Husky plastics from 266/288/394 etc,an 009/010/011/012 NOS crankcase,and other bits of flotsam and jetsam around.Please PM me,as this thread moves way to fast for me to keep up.Also minimal pictures of dead presidents available!
RR

 

[blsnelling]

brad, this is the shortest one i have. 23 0verall. the rollernose is different , have not seen on like it before.

What's the width of the stud slot?

 

[fastLeo151]

I'm looking for a good used crank for a 041, if you have a bottom end that has good bearings that would be fine

 

[Mastermind]

I'm seeking a small chainsaw to cut pie with. :msp_sneaky:

 

[Jwalker1911]

I'm looking for a good used crank for a 041, if you have a bottom end that has good bearings that would be fine

Is that the two bearing model or the uni?

 

[Mastermind]

Is that the two bearing model or the uni?

Has to be the dual bearing model......the uni-bearing was only found in Union Co. TN. :msp_sleep:

 

[thomas1]

I'm looking for a good used crank for a 041, if you have a bottom end that has good bearings that would be fine

Here we go, again. otstir:

 

[o8f150]

I'm seeking a small chainsaw to cut pie with. :msp_sneaky:

i have 5 extra ones

 

[thomas1]

i have 5 extra ones

Pies or chainsaws?

 

[tbone75]

I'm seeking a small chainsaw to cut pie with. :msp_sneaky:

Mini-Mac? :hmm3grin2orange:

 

[RedneckChainsawRepair]

I'm seeking a small chainsaw to cut pie with. :msp_sneaky:

Pie did you say pie. :msp_tongue:

Thought she was getting ready to make me another pecan pie when I seen a bag of pecans yesterday on the table. Woke up to the smell of zucchini cake instead. Still :cool2: