Swap meet...

[Jacob J.]

Remember I have one for you as well JJ. Crank bearings are shot though. Don't know if you can fix that or not in these. As well as a 076 in a box!! LOL

Too many saws, not enough time...

 

[nstueve]

Jonsered parts

Hey guys,
A while back my neighbor bought a bunch of old jred parts from a dealer. All of the below are NOS parts. I have a 455 air cleaner cover and break/clutch cover. lots of rewind springs, have 3 on/off switches. ect... if you think you see something you can use let me know via email nstueve(at)gmail.com

Also have some total super bars in very very good condition but they might be spoken for... I know I keeping 1 to run on my makita 6401...

 

[parrisw]

Too many saws, not enough time...

I hear ya. I have way less then you I'm sure, and I don't have the time to do them all.

 

[fastLeo151]

Hey guys,
A while back my neighbor bought a bunch of old jred parts from a dealer. All of the below are NOS parts. I have a 455 air cleaner cover and break/clutch cover. lots of rewind springs, have 3 on/off switches. ect... if you think you see something you can use let me know via email nstueve(at)gmail.com

Also have some total super bars in very very good condition but they might be spoken for... I know I keeping 1 to run on my makita 6401...

Are the 20in bars husky mount?

 

[nstueve]

yeah they are all husky mount. but like I said I don't know about the bars yet. guess I threw them up just b/c I had the other jred stuff to post. Sugcutter has first dibs so I put them up for him to see and if he doesn't take them then they'd be up for grabs. I'll be keeping one of the 20in bars.

 

[Eccentric]

Hey guys,
A while back my neighbor bought a bunch of old jred parts from a dealer. All of the below are NOS parts. I have a 455 air cleaner cover and break/clutch cover. lots of rewind springs, have 3 on/off switches. ect... if you think you see something you can use let me know via email nstueve(at)gmail.com

Also have some total super bars in very very good condition but they might be spoken for... I know I keeping 1 to run on my makita 6401...

I could use a kill switch for a Jonsereds 621 and am very interested in that small Husky mount 18" Total bar for my Homelite XL-103. Can't email for several hours however....

 

[nstueve]

EDIT: to save space and another post here is a parts list of about 80% of the above parts pics: I don't expect much from anything but if you want the whole lot shoot me a PM. I'll piece it all out if need be too. Whatever doesn't get snapped up will go onto fleabay later this week/weekend. Just figured I'd let you guys pick the good stuff out.

All NOS:
Total rewind spring, Jonsered 504 21 26 02: 49sp, 50, 51, 52, 52E, 521EV
Total rewind spring, Husky 50 17 631 01: Rancher 50
Total rewind spring, Oleo-Mac (olympyk) 40.00132: 234, 240, 240e, 241, 244, 264, 350, 355a, 935d, 945, 950super.
Also works on weed eaters: Efco pro38, jet 300&400, Olympyk b200, b220, b260, b300, b400, b450
Jonsered/Husky 670? air filter NLA: 503 40 08 (01-02?)
Jonsered/Husky AV/Mount NLA: 503-486102
Efco/Olympyk? Metal bushing: 50-00164 or 5000164
Efco Clutch Drivers(center of clutch pack): 50-00161 or 5000161
Jonsered gas cap 503-182101: fits 455
Total RK23HS Tillotson Carb kit
Rewind Springs 61-00963 or 6100963 unsure what they fit
Husky? Needle bearing: 501831801
Jonsered/Husky “Abrasive protector”: 504180410
Jonsered husky bar adjuster pin: 504-590503 x10
Jonsered husky lock nut for bar adjuster: 732-211401 x10
Two large needle bearings marked: TB-121513

Also for trade, swap, w/e... New 14in Sabre bar. Think it's husky mount???

 

[diggers_dad]

Also for trade, swap, w/e... New 14in Sabre bar. Think it's husky mount???

That looks just like my small Stihl (021-025) mount pattern.

 

[axlr8]

Looking for an 056 magnum 2 ignition It would be nice if it is known good!!!

Ohh, and a good known coil would be nice for a Homelite 550 PM with any thing you can help me with!!!

 

[nstueve]

That looks just like my small Stihl (021-025) mount pattern.

That's what i thought too... I'll try to fit it to the 025 I have, but I matched it with a 16in bar off an 011 and the holes were closer together than the Stihl bar. I'll try it out and see but unsure it'll match. :msp_unsure:

 

[rwoods]

If you give me the dimensions I could bend some up for you. .060" aluminum ok for material?

Mr. Bowsaw fixed me up with a guard. If you would like the dimensions anyway let me know. Thanks again for your generous offer. Ron

 

[RedneckChainsawRepair]

Hey guys,

Also have some total super bars in very very good condition but they might be spoken for... I know I keeping 1 to run on my makita 6401...

What are the bars 050? 3/8 325? Could use a small and large husky mount.

If needed. I have some older stihl E and ES bars that look in same condition or lower. I would have to get lengths, gage, etc off them. Dont own any stihls at the moment.

 

[LowVolt]

Stihl ProMark Safety Chaps-size 36

Check it out-------> http://www.arboristsite.com/classifieds.php?do=viewitem&itemid=2864

 

[bplust]

I had a decent saw score today. I'd rather not move any of these completely, as I know at least one person that runs at least one of these saws in my neighborhood, and I like to be able to keep my neighbors going. But, for parts, I got:

McCulloch:

pm10-10s
pm10-10 x2
EB 2.0x2
Mac 35
SP40
pm610 x2
pm55

And a cherry pm700, which I'm gonna keep for the time being.

Jonsereds:

2054 (I think that's the number)
535 x2
520sp
930
630 Super (FYI, I have 6 saws from the 600 family, mainly 670's, in various stages of completion).

Stihl:

026

Pretty much everything is 100%. A missing air filter cover here and there, unfortunately, the top handle plastic section is broken on the 930 .

I tend to be lazy about cleaning my PM box, so here's my email: [email protected]. Or 802 274 5594 works as well.

Better that parts go to my neighbors and you folks than fattening up FeeBay.

Regarding trades, I want Partner P100/Mac 1000 parts/saws, and my neighbor really needs a Shindaiwa 575 clutch cover; preferably a really really nice one, as the saw looks new.

Bryan

 

[RedneckChainsawRepair]

Looking for another echo 702 muffler setup. I think these are the same. 602 702vl 750evl and deere 60v, 70v, 80ev

 

[zogger]

I had a decent saw score today. I'd rather not move any of these completely, as I know at least one person that runs at least one of these saws in my neighborhood, and I like to be able to keep my neighbors going. But, for parts, I got:

McCulloch:

pm10-10s
pm10-10 x2
EB 2.0x2
Mac 35
SP40
pm610 x2
pm55

And a cherry pm700, which I'm gonna keep for the time being.

Jonsereds:

2054 (I think that's the number)
535 x2
520sp
930
630 Super (FYI, I have 6 saws from the 600 family, mainly 670's, in various stages of completion).

Stihl:

026

Pretty much everything is 100%. A missing air filter cover here and there, unfortunately, the top handle plastic section is broken on the 930 .

I tend to be lazy about cleaning my PM box, so here's my email: [email protected]. Or 802 274 5594 works as well.

Better that parts go to my neighbors and you folks than fattening up FeeBay.

Regarding trades, I want Partner P100/Mac 1000 parts/saws, and my neighbor really needs a Shindaiwa 575 clutch cover; preferably a really really nice one, as the saw looks new.

Bryan

Well, I guess that's a nice score! I don't need any of your stuff, but wow!

 

[bplust]

Yea, I can't disagree with your comment about it being a nice score.

However, I will argue your point that you don't need any of my haul. Do you drive a standard rig? Is your ebrake cable broken? My matching EB2.0's are excellent wheel chocks :jester:!

 

[zogger]

Yea, I can't disagree with your comment about it being a nice score.

However, I will argue your point that you don't need any of my haul. Do you drive a standard rig? Is your ebrake cable broken? My matching EB2.0's are excellent wheel chocks :jester:!

bwahahaha, you been peeking, I do need wheel chocks! I carry some hardwood splits in the back for that...heheheh

Oh ya, pics or it didn't happen, Mr. Megascore!

 

[bplust]

LOL!!!

Give me a second on pics. I really should have grabbed one when they were all on top of my 85' Mercedes 300td, I definitely goofed on not getting a shot of that.

The 10-10s is a nice saw, anyone have any idea what the difference between it and a PM55 is? I'm pretty sure they have the same displacement, and beyond some difference in color, I'm not sure what the differences are. I've torn into at least a dozen pm55's, but this is the first pm10-10s I've had in my hands.

Bryan

 

[thomas1]

Runner

Parts saw, not locked up. What you see is what you get.