the all aussie dribble thread!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi Guys well another saw running today Echo CS 452VL
cold compression was 125psi before i got it fired up, what bar should be on this saw, this is the ones thats on the now, i dont think its right one
BAR
H007 is could be H00Z
16 TXL 50 sn
4177

TIP OF THE BAR INFO
WINDSOW
SRA-222-All
3/8 p
i dont know if this is the correct bar
 
well folks in your opinion what would be best scope for a .22 for rabbits
X2 for theopticzone. Depends how much you want to spend. I've only got tascos on my rimfires and they do the job but if you wanted to spend more anything in the 3-9x32 bracket should work well. The leupold vx1s are a good scope for the price.
 
I have a Clearidge 3x9x32 scope on my CZ .22. A good scope and was quite cheap when I bought mine. Only drawback is you have to buy it from the U.S. Not sure how that goes right now with the exchange rate. I bought mine from The optic Zone.

http://theopticzone.com/products-pa...learidge-ultra-rm-3-9x32-ao-duplex-dot-matte/

X2 for theopticzone. Depends how much you want to spend. I've only got tascos on my rimfires and they do the job but if you wanted to spend more anything in the 3-9x32 bracket should work well. The leupold vx1s are a good scope for the price.

thanks for the info helps alot :cheers:
 
WTB a Echo CS 452VL saw
Ive got a broken handle on mine and has any one got an old one laying around please

or a parts saw, let me know please
 
Well, I wasn't going to guess that in a thousand guesses. Nice find Rudi, another use for the big bad 90.

I found a video also! Take note when he starts it... yes you'll see it running lol

Btw has anyone come across a belt drive pulley clutch drum for thee old 90's? Would come in handy for different attachments.

 
Al (Nardoo) sent me a nice looking Echo CS 452 VL (not running) and a ratty looking one for parts.
It had good compression, spark and was getting fuel, the problem had to be a massive air leak or the timing was out,
I pulled the flywheel cleaned and adjusted the point points, put it back together and she started after 4 pulls.

View attachment 266287

This is the fist Echo saw I've worked on..It looks to be a well built little saw.

Thanks Al :cheers:

PS Al, I'm not sure why you sent a Mac bar with it.... It doesn't fit :dizzy:
Gmax, have you still got any parts for this saw please
Regards Peter
 

Latest posts

Back
Top