the all aussie dribble thread!

[Rudolf73]

Talking about Stihl dealers, I made a joke with my dealer about how cheap a 200T chain was (54c a DL), and he said he had quite a few customers tell him the same thing - not sure where they buy their chains... :msp_confused:

He didn't notice my hint of sarcasm either :monkey:

 

[derwoodii]

Thats a wee weird my AS post thread email notifications twas jammed up, now its all come though the tube in one go late this avo, I think tdi-rick was suffering a similar computta gremlin torment. Tis not great issue but often a indiactior of a unstable system about to go pop.

 

[Rudolf73]

Thats a wee weird my AS post thread email notifications twas jammed up, now its all come though the tube in one go late this avo, I think tdi-rick was suffering a similar computta gremlin torment. Tis not great issue but often a indiactior of a unstable system about to go pop.

I have the same problem, just had the last weeks email notifications come through in 5 minutes... rather annoying

 

[deye223]

I use Jakmax full synthetic made by Alco in the US (it's also cheaper than stihl oil), 50:1 for all my saws 50 or 5 years old...................................................................................
deye 223..
that stuff has a fuel stabilizer in it as well would like too see someone let it sit in a container for six months and see if it works just not on a realy good saw don't want no one to toast a good saw

that is how it should read matt i was in a severe amount of pain when i typed it so was not all that clear, what it was ment to say was i would like to see some mixed with fuel and let sit for 6 or 12 months and test

and dito on the computer glitch been doing that here for over a month PITA cheers

 

[tdi-rick]

Following on from Al's request in another thread, and seeing as Neil and Will are pre-occupied this weekend (Australian tittles have been on in Qld) I don't think Neil will mind me posting a pic of his old 3120 twin that he raced back in the nineties I believe.

I can't imagine the nuts you'd need to man handle that bastage in the speed event.

(Aussie speed race is a bore cut on the centreline [at least in NSW, Qlders cheat :monkey:], continue that cut down, straight back up to drop that disc, cut down then back up for the next two discs without cutting the line. You have 100mm to do this in and cutting the line is a disqualification)

 

[MCW]

Following on from Al's request in another thread, and seeing as Neil and Will are pre-occupied this weekend (Australian tittles have been on in Qld)

Neils a top bloke hey Rick. Spent a bit of time on the phone with him lately. He bought the last three 56mm 395XP P&C kits off me. Reckons they came up awesome as far as tolerances goes. He certainly knows his stuff. He raced one of my kits up in QLD pulling something like 16,500rpm out of a 395XP with finger ports. I wish they raced closer but sometime in the next 12 months I'm going to head north to one of those events. May even pick you up on the way through

 

[tdi-rick]

I sent him a txt last night to see how they all went, (Oz Titles) but haven't heard back yet.

Probably all sleeping hangovers off ATM

and yes, he's a good bloke.

I learnt heaps from Neil, Dean, Jonesy and all the other blokes at the training day I went to last year.

Poor Neil is too willing to share info, so everyone wants a piece of him.

 

[husq2100]

well I probably should have got in my truck and wandered out to this........but with work busy and 2 days out of this weekend the surf started to line up. Solid 5 foot and peeling. So good and 8hrs in 2 days im feeling it a bit haha. Im real keen to hear the results as I know Neil and Will were both working on some stuff that may or may not have been run at these titles :msp_sneaky: Will sent me the dates for the races....I might have to head to Crows Nest for a sticky...surf permiting of coarse

 

[lumberjackau]

2012 Australian Chainsaw Titles Results
Great weekend at Kingaroy Queensland for the 2012 Australian Chainsaw Titles, hats off to the organizers Lindsay & Annette Ackers, Daryl & Tamzin Pearce and the Kingaroy Show Committee for putting on a successful race meeting. With racers from as far away as Singleton NSW arriving for a beautiful weekend with sunny skies and cool temps which made for some top class racing throughout the two day event. The top honours of Open Post Rip Champion went to the Crows Nest Qld cutter Wayne Donovan

Under 77cc Modified Speed
1st Will Hutchins
2nd Wayne Donovan
3rd Frank Curtis

Under 100cc Modified Speed
1st Bill Rumble
2nd Terri Brazier
3rd Will Hutchins

Open Modified Speed
1st Dean Mckinnen
2nd Gavin Newitt
3rd Alan Rickson

Under 77cc Unlimited Speed
1st Will Hutchins
2nd Nigel Newitt
3rd Ty Palmer

Under 100cc Unlimited Speed
1st Will Hutchins
2nd Gavin Newitt
3rd Wally Krouse

Open Unlimited Speed
1st Trever Baker
2nd Gavin Newitt
3rd Will Hutchins

Womens Under 100cc Speed
1st Teresa Donovan
2nd Donna Hutchins
3rd Tamzin Pearce

Veterans Open Speed
1st Wayne Stark
2nd Gary Wallace
3rd Brian Hogno

Ladies Open speed
1st Jennine Vellia (sp?)
2nd Melinda Newitt
3rd Corinne Worth

Hotsaw Speed
1st Neil Onley
2nd Dean McKinnin
3rd Ty Palmer

Disk Stack
1st John Porter
2nd Wally Krouse
3rd Russel Curtis

Novice Rip
1st Danny Kerr
2nd Daniel Hedges
3rd Brian Hogno

Under 100cc Rip
1st Wayne Donovan
2nd Daryl Pearce
3rd Terri Brazier

Open Rip
1st Wayne Donovan
2nd Daryl Pearce
3rd Bill Rumble

Judges Awards

Encouragement Award
Ty Palmer

Best and Fairest
Nigel Newitt

All Round points
1st Will Hutchins
2nd Wayne Donovan
3rd Gavin Newitt

 

[tdi-rick]

Defending Overall Champ wins !

Congratulations Will.

Neil sent me a text a little while back and I asked to pass onto you and Dean congrats.

Can't wait for the piccies and vids now

 

[lumberjackau]

Defending Overall Champ wins !

Congratulations Will.

Neil sent me a text a little while back and I asked to pass onto you and Dean congrats.

Can't wait for the piccies and vids now

Thanks Rick, and definatly a big congrats to Dean and Neil, both had big wins in the big saws

 

[gmax]

Guys, just a warning don't bid on this Stihl 032 Stihl 032 AV FarmBoss Chainsaw *Very Clean* | eBay
That's my chainsaw I sold earlier today, some parasite has copied my photo and description, he says there's nine available
The scammer been reported to ebay.

 

[Nardoo]

I just emailed him and offered to buy all nine.:msp_biggrin:

Al.

 

[gmax]

I just emailed him and offered to buy all nine.:msp_biggrin:

Al.

Al, Ask if you can pick them up, I'll bring my baseball bat.

 

[deye223]

this bloke is so funny

Saw is sold with no guarantee, warranty, or return policy of any sort.
•Saw is sold with guarantee it can be made functional

 

[gmax]

The listing has been removed, it's good to see ebay act quickly for a change :msp_smile:

 

[ausneil 1]

Thanks Rick, and definatly a big congrats to Dean and Neil, both had big wins in the big saws

thankyou Will,,,,
You own the show mate, nothing else to say mate.
i guess i could say,,,,, can i please have some pointers on how to cut straight please ha ha

A very good tough weekend in the office as it should be, anything less would be a dissapointment.

I would like to publicly congratulate Dean Mckinnon from nsw on his first australian title. Dean has been trying bloody hard for many years and finaly has one, top stuff dean.

 

[splitpost]

all this racing within 6 stubbies drive and i gotta work,maybe one day i might get to see you guys race ,when my roster:msp_thumbdn: lines up with a race meet

 

[lumberjackau]

all this racing within 6 stubbies drive and i gotta work,maybe one day i might get to see you guys race ,when my roster:msp_thumbdn: lines up with a race meet

Well, this coming weekend is full of racing again, saturday is Crows Nest Qld, and on sunday is Boonah Qld and the qld state open post rip title.

Been pointed out I forgot a few results

Team Post Rip
1st Wayne Donovan and Ashley Yaxley
2nd Lindsay Ackers and Jason Ackers
3rd Bill Rumbel and Neil Onley

Jack and Jill Post Rip
1st Bill and Jan Rumbel
2nd Wayne and Teresa Donovan
3rd Nigel and Melinda Newitt

State of Origin Team Post Rip

QUEENSLAND

 

[Rudolf73]

Sweet, I'll try and make it to Crows Nest :biggrin: