the all aussie dribble thread!

[WidowMaker_1]

poor poor poo packing pippy

 

[derwoodii]

i'm liking this 308W case work nice big and easy no finger hand cramps i get with the weeiney 223 I de primed pocket cleaned trimmed rubbed shinny 40 cases i could'a kept going but the cold in my shed drove me away,,,, now to study up on what and how much grains of pop to be used

 

[derwoodii]

Ring the local trade school, they might do something with them if Vince doesn't want to turn them into cookies.

$600 to lift crane standing logs truck somewhere that wants it or $6000 to log it chop it dump it in bins off land fill... i got a few potential sites in the hand but always looking for leads local school good idea i'll call a few tree training Tafe and training providers tomoz

 

[chippy]

$600 to lift crane standing logs truck somewhere that wants it or $6000 to log it chop it dump it in bins off land fill... i got a few potential sites in the hand but always looking for leads local school good idea i'll call a few tree training Tafe and training providers tomoz

Worst case scenario you can chip it. Any golf course will take it for free......or sell it if you can....but don't try storing it...problematic.

You know a local artist that wants to make totem poles?

Chop it up and bonfire it next winter if you've got the room to store it.....stuff paying to get rid of it.

 

[derwoodii]

Worst case scenario you can chip it. Any golf course will take it for free......or sell it if you can....but don't try storing it...problematic.

You know a local artist that wants to make totem poles?

chip means hammer mill so $2-3000 and i still need to collect move it to secure site so add $600 i;m puttin out call for wood carvers but more often they want cypress not radiata pine i always find a place last was big log track barrier for unwanted 4X4 i'll be asking pony club as they use logs for steeple jumps

 

[chippy]

Pony clubs is a great idea.

Good for permanent road closures. Trials bike courses. Wood carving.......pavers that last 3 months.

 

[derwoodii]

this is doing the web round thought i'd share not likely OZ lads but

These photos are from the Vietnam War...developed in 1971. They were found in a photo album that was purchased at a thrift store. Share the heck out of these photos! Let's see if we can find the owner of these pictures.

 

[460cixy]

i'm liking this 308W case work nice big and easy no finger hand cramps i get with the weeiney 223 I de primed pocket cleaned trimmed rubbed shinny 40 cases i could'a kept going but the cold in my shed drove me away,,,, now to study up on what and how much grains of pop to be used

Gotta be carefull talkin about that stuff here guns are the work of the devil according to some so called open mined people

 

[chippy]

Oh no, one of the duelling banjos has returned.

 

[WidowMaker_1]

LOVES me guns!!!! Derwoodii I use AR2208 in the M70 Stealth

 

[WidowMaker_1]

Gotta be carefull some open mined bumholes

ewww

 

[deye223]

Must be a Muslim in a cowboy hat?

View attachment 441889

this is the only thing i do on me knees


and if you don't keep an eye on these things they bloody multiply i had one



now i got TWO not that i'm complaining

 

[KiwiBro]

From fudge packing to guns to cars to saws to religion. We sure are a diverse ensemble.

For the record fellas, I don't give a rats arse what anyone's sexual orientation is and find persecution on that basis alone as unbecoming and undesirable as any sociopathic, discriminatory aspects of any religion or culture.

 

[2strokenut]

chip means hammer mill so $2-3000 and i still need to collect move it to secure site so add $600 i;m puttin out call for wood carvers but more often they want cypress not radiata pine i always find a place last was big log track barrier for unwanted 4X4 i'll be asking pony club as they use logs for steeple jumps

id burn it im my fire place woods wood to me.

 

[KiwiBro]

id burn it im my fire place woods wood to me.

old pine is the most underrated firewood we have here, me thinks. It sells pretty cheap but burns far better than many realise.

 

[460cixy]

View attachment 441925 LOVES me guns!!!! Derwoodii I use AR2208 in the M70 Stealth

Be carefull Kain was that 308 just wandering around in the bush? Guns kill people mate just take care

 

[460cixy]

There's been alot of talk on here lately by the resident expert on muffler mods performance saw building and other lefty diatribe. Last night I had a mate drop a saw off and I saw potential straight away so I'm going to weigh in to the performance saw building and muff modding.

Meet the rok aka the green roket

Straight gassed and straight sexual orientation from the first start this saw was in a bad way

There was also some transfer on the bore but I found the more I used the dremel the more transfer I removed
And the more beers I had the wider the port got and a little higher after checking the port timing

Now to go above and beyond the average ozito operator I cracked in to this thing and opened up the Intermediate jet and lowered the main jet in a little to Improve fuelling but im leaving the limiter caps on so I can't tune it properly! after alot of thought and looking at the muffler I decided to leave it alone and not bore massive holes in it I know this goes against the grain of experienced builders but its how I roll

And it actually goes its a little on the lean side because I left the limiting caps on like the pro builders do and can't richen it up but who cares it will keep the muffler and plug nice and dry

 

[chippy]

There's been alot of talk on here lately by the resident expert on muffler mods performance saw building and other lefty diatribe. Last night I had a mate drop a saw off and I saw potential straight away so I'm going to weigh in to the performance saw building and muff modding.

Meet the rok aka the green roket

Straight gassed and straight sexual orientation from the first start this saw was in a bad way

There was also some transfer on the bore but I found the more I used the dremel the more transfer I removed
And the more beers I had the wider the port got and a little higher after checking the port timing

Now to go above and beyond the average ozito operator I cracked in to this thing and opened up the Intermediate jet and lowered the main jet in a little to Improve fuelling but im leaving the limiter caps on so I can't tune it properly! after alot of thought and looking at the muffler I decided to leave it alone and not bore massive holes in it I know this goes against the grain of experienced builders but its how I roll

And it actually goes its a little on the lean side because I left the limiting caps on like the pro builders do and can't richen it up but who cares it will keep the muffler and plug nice and dry

9 pics and not one gay bashing, racist or xenophobic comment in there..

We'll done.

 

[460cixy]

So you just looked at the pictures then?

 

[peter92]

Whats this, round 2 for you 2 guys, i look forwards to this its like DAYS OF OUR LIVES