the all aussie dribble thread!

[AUSSIE1]

For you blokes with smart phones, is it worth getting Tapatalk to view and post on the forum ?

I feel I may need the occasional updates/forum fix while I'm away

I have'nt used tapatalk Rick but just typed this without it without any troubles.

Would also depend on the phone and this being the IPhone.

 

[AUSSIE1]

hi guys,
i need some parts for my mono h81, so if any one can help please let me know
main part at the moment is the pull starter that bolts onto the cover
regards peter

Peter that would be tecumseh with an "S"? You would probably be best to source a carby kit by it's type/manufacture.

Bit of info for you mate.

Model Profile: AH81 powerhead

Chain Saw Collectors Corner - Gasoline Chain Saws by Manufacturer

 

[peter92]

Peter that would be tecumseh with an "S"? You would probably be best to source a carby kit by it's type/manufacture.

Bit of info for you mate.

Model Profile: AH81 powerhead

Chain Saw Collectors Corner - Gasoline Chain Saws by Manufacturer

thanks for putting up the info, it was very helpfull
one question though, are you saying that it isa powerhead, not a mono or a ward
is that my understanding
just that when i order parts i want to put down the right thing
hope you can help me out
regards peter

 

[splitpost]

looky looky

got these the other day
3/8 9and 10 pin and 325 10 and 12 pin

 

[AUSSIE1]

thanks for putting up the info, it was very helpfull
one question though, are you saying that it isa powerhead, not a mono or a ward
is that my understanding
just that when i order parts i want to put down the right thing
hope you can help me out
regards peter

Pete, the only knowledge I have was gained by looking up the info you provided. I tend to think the powerhead was used to power different brand saws. Firstly it sounds like it could be an AH81 instead of the H81. Also I tend think it's along the lines of a Ward(S)/Mono. I'm only guessing all this but they are leads I'd follow. Do Googles on AH81, Ward, Wards, Mono, Tecumseh etc. Send private messages to those that look to run plenty of vintage saws.

Bout all I can help you with mate and all the best with it and let us know how you go.

:msp_thumbup:

 

[tdi-rick]

[snip]

what really is the Oz 660 mag hp?

Not as much as a 395XP







:hmm3grin2orange:

 

[tdi-rick]

I have'nt used tapatalk Rick but just typed this without it without any troubles.

Would also depend on the phone and this being the IPhone.

Thanks Al.

Received a new Galaxy SII a few weeks back and still learning to drive it properly.

I can view forum posts OK, juts haven't tried posting yet.

I'm taking the laptop with me too, hopefully there's wi-fi were I'm going.

 

[tdi-rick]

got these the other day
3/8 9and 10 pin and 325 10 and 12 pin

Look like Danzco's ?

http://www.danzcoinc.com/html/chain_saw_sprockets.html

 

[tdi-rick]

thanks for putting up the info, it was very helpfull
one question though, are you saying that it isa powerhead, not a mono or a ward
is that my understanding
just that when i order parts i want to put down the right thing
hope you can help me out
regards peter

Pete, I'd try asking on the Chainsaw Collectors Forum.

I don't think I'm allowed to post a direct link, but try something like www. chainsawcollectors.se/phpbb3/index.php without the spacing

Good bunch of blokes and you'll probably recognise a few reprobates like RandyMac and McBob from here

 

[tdi-rick]

hey Rick, it will all still be there when you get back ...have a great tip/training. Let me know if you are in the neigbour hood or south of

Will do mate.

Vickie wants to visit a couple of friends when she comes up in the hinterland if we have time, so I'll be almost going past.

That's if the Landy actually gets us there.

It's being a friggin Land Rover ATM.....

 

[AUSSIE1]

Thanks Al.

Received a new Galaxy SII a few weeks back and still learning to drive it properly.

I can view forum posts OK, juts haven't tried posting yet.

I'm taking the laptop with me too, hopefully there's wi-fi were I'm going.

Tip the phone on it's side and it makes it easy to type with both hands (thumbs) and page viewing. You can expand the page your viewing by "spreading" the page with your fingers/thumbs.

You can use your phone as a modem also which is what I do at home to use up the 2 gigs supplied with the phone plan.

 

[ozflea]

Pete, I'd try asking on the Chainsaw Collectors Forum.

I don't think I'm allowed to post a direct link, but try something like www. chainsawcollectors.se/phpbb3/index.php without the spacing

Good bunch of blokes and you'll probably recognise a few reprobates like RandyMac and McBob from here

Careful who you are calling a retrobate ol mate i'm big black and bloody ugley and easy offended as regards Randy call what you like hes a #####cat.

McBob.

 

[splitpost]

Look like Danzco's ?

Chain Saw Sprockets

yes ,that they are

 

[Rudolf73]

yes ,that they are

Are you getting into racing too or running really really short bars...?

 

[splitpost]

Are you getting into racing too or running really really short bars...?

wish i had the time to take up racing,but its all fun

 

[Rudolf73]

Buyers beware... there are around half a dozen suspicious husky 365's from Malaysia on fleabay.

HUSQVARNA 365 PROFESSIONAL GAS 20" CHAINSAW . BRAND NEW FACTORY SEALED | eBay

 

[splitpost]

[video=youtube_share;tOfsXRWHpso]http://youtu.be/tOfsXRWHpso[/video]

 

[lumberjackau]

Splitpost, that 88 is cutting great

for those of us that like to shoot a bit, hope it is not a repost
[video=youtube;-TC2xTCb_GU]http://www.youtube.com/watch?v=-TC2xTCb_GU&list=UUf90M7whFs2cezl_xrsZEbg&index=7&feature=plcp[/video]

 

[splitpost]

Splitpost, that 88 is cutting great

for those of us that like to shoot a bit, hope it is not a repost
[video=youtube;-TC2xTCb_GU]http://www.youtube.com/watch?v=-TC2xTCb_GU&list=UUf90M7whFs2cezl_xrsZEbg&index=7&feature=plcp[/video]

thanks,yeah thats a cool song and vid

 

[MCW]

Pete, the only knowledge I have was gained by looking up the info you provided. I tend to think the powerhead was used to power different brand saws. Firstly it sounds like it could be an AH81 instead of the H81. Also I tend think it's along the lines of a Ward(S)/Mono. I'm only guessing all this but they are leads I'd follow. Do Googles on AH81, Ward, Wards, Mono, Tecumseh etc. Send private messages to those that look to run plenty of vintage saws.

Bout all I can help you with mate and all the best with it and let us know how you go.

:msp_thumbup:

Yeah I built a few as a youngin Al. Family business and stuff

for those of us that like to shoot a bit, hope it is not a repost

As much as I know he is supporting shooting he really does come across as a wally.