the all aussie dribble thread!

[heimannm]

Change of plans for me guys, I am now spending the weekend in Bendigo. Any suggestions?

Mark

 

[derwoodii]

Change of plans for me guys, I am now spending the weekend in Bendigo. Any suggestions?

Mark

ok broad range of things here

Welcome to the New Home of Victorian 1/4 Mile Drag Racing - Heathcote Park Raceway about 25m south east

or get in touch with your femmine side :msp_biggrin:

What's On This Month - The Female Body : Revealed and Reviled


aww just saw this is done n over oh well go drag racin


South is maldon castlemain hippys coffee shops and tourist north is Murray river towns weather looks good nay to hot

 

[ausneil 1]

It's nice and shiny for a 20 year old saw, I've just reported the scumbag.

BTW I've just finished filming a 7 saw comparison with my chinga 070,
Is it a oriental express or a Beijing slug... I'll get it uploaded later today

You men are on the ball, good stuff.


Looking forward to seeing the 7 saw line up,,,,, won't the bobster be thrilled to bits if the chiny wins against all 6.

 

[MCW]

You men are on the ball, good stuff.


Looking forward to seeing the 7 saw line up,,,,, won't the bobster be thrilled to bits if the chiny wins against all 6.

Even though Wayne owns about 132 saws Neil I doubt any of them would be nervous about the Bejing Beast...

 

[gmax]

You men are on the ball, good stuff.


Looking forward to seeing the 7 saw line up,,,,, won't the bobster be thrilled to bits if the chiny wins against all 6.

Even though Wayne owns about 132 saws Neil I doubt any of them would be nervous about the Bejing Beast...

The wait is over..
[video=youtube;lZj9CZu1Uhc]http://www.youtube.com/watch?v=lZj9CZu1Uhc[/video]

The Mac 15 struggled but the 33cc Poulan stuck it up the chinadingdong 070

 

[MCW]

The wait is over..
[video=youtube;lZj9CZu1Uhc]http://www.youtube.com/watch?v=lZj9CZu1Uhc[/video]

The Mac 15 struggled but the 33cc Poulan stuck it up the chinadingdong 070

I'm impressed by the Chinese Monster Wayne. It actually made about 20 cuts without blowing up On a side note lean the 7900 out a bit. Poor thing is still too rich

 

[gmax]

I'm impressed by the Chinese Monster Wayne. It actually made about 20 cuts without blowing up On a side note lean the 7900 out a bit. Poor thing is still too rich

No worries, I'll give it a tweak I was being cautious until It's ran a few more tanks.
I too was surprised the chingdinadongalong held together, at least It's sort of reliable now

 

[MCW]

No worries, I'll give it a tweak I was being cautious until It's ran a few more tanks.

It's German. Just thrash the arse off it...

 

[gmax]

The prices of old saws on ebay is bullchit!... I was watching an old electric start Mac, I have one but not the battery pack.
This one went for $210, far too much for a shelf queen.

 

[ausneil 1]

Well thanks for takeing the time Wayne doing that vid. Actualy for what it is the chiny 70 wasn't all that bad really,yea it wasn't a rev head, but the genuine article is not either.
Just as well you never tried a 200T, that would of sorted old chiny out.

 

[RandyMac]

It's German. Just thrash the arse off it...

Germans love getting their asses thrashed, they do it so well.

 

[MCW]

Germans love getting their asses thrashed, they do it so well.

I believe you are correct Randy. In fact they invented the term "thrash your arse off".
How they hanging anyway old son?
We're in the middle of a ripper thunderstorm here. I can fart and Tracy can't even hear it...
The smell however...

 

[gmax]

Well thanks for takeing the time Wayne doing that vid. Actualy for what it is the chiny 70 wasn't all that bad really,yea it wasn't a rev head, but the genuine article is not either.
Just as well you never tried a 200T, that would of sorted old chiny out.

I have used a 200T...Matt has one (maybe more now) IMO that's the best saw stihl made.
I've used most of Matt's saws... although he's probably bought a dozen more since I was there last :msp_biggrin:

Neil, So you think the genuine 070 wouldn't be that much faster?

 

[RandyMac]

I believe you are correct Randy. In fact they invented the term "thrash your arse off".
How they hanging anyway old son?
We're in the middle of a ripper thunderstorm here. I can fart and Tracy can't even hear it...
The smell however...

The hanging is good, as always.

We had a strong front pass through yesterday, picked up just over 5 inches of rain in about 12 hours.
The squalls were particularly nasty, well still are, just farther apart now. Another front is due in later today and another for Saturday and another.........

 

[MCW]

I have used a 200T...Matt has one (maybe more now) IMO that's the best saw stihl made.
I've used most of Matt's saws... although he's probably bought a dozen more since I was there last :msp_biggrin:

I do have a brand spanker 200T in the cupboard. Ain't selling that one I agree though, the 200T closely followed by the 241C...

The hanging is good, as always.

We had a strong front pass through yesterday, picked up just over 5 inches of rain in about 12 hours.

Hanging is awesome and the signature of a well thought out emission...

5" is half our annual rainfall

 

[RandyMac]

I do have a brand spanker 200T in the cupboard. Ain't selling that one I agree though, the 200T closely followed by the 241C...



Hanging is awesome and the signature of a well thought out emission...

5" is half our annual rainfall

Right now we are at 66" for the year, about a foot over average, betting on another 6 foot year.
The record is 116", set in the late '60s. We had 92" in 1996.

 

[MCW]

Right now we are at 66" for the year, about a foot over average, betting on another 6 foot year.
The record is 116", set in the late '60s. We had 92" in 1996.

Crutchrot?

 

[RandyMac]

Crutchrot?

Only among our Abo's, best to be avoided, the cure can be worse than the rot.

 

[ausneil 1]

Neil, So you think the genuine 070 wouldn't be that much faster?

From memory i don't think so, i have only seen a few 070 stihls. They were not popular in my part of australia, 090 stihl's were a different story.
A simular story with the old 051, they were popular but not as popular as the 075 then 076.In fact i seem to remember seeing more 041's than 070's.

I own 2 going 090's, both modified for a little one off raceing.
I only have 1 vid of my 90's, not original but does go ok for an old slug.
090 Modified Production saw. - YouTube

 

[gmax]

From memory i don't think so, i have only seen a few 070 stihls. They were not popular in my part of australia, 090 stihl's were a different story.
A simular story with the old 051, they were popular but not as popular as the 075 then 076.In fact i seem to remember seeing more 041's than 070's.

I own 2 going 090's, both modified for a little one off raceing.
I only have 1 vid of my 90's, not original but does go ok for an old slug.
090 Modified Production saw. - YouTube

Neil, I just watched the video.. your 090 might be old but It's no slug!