The official spike template thread... please upload your templates

[promac850]

I figured this might be an interesting topic. If anyone has a spike design that they really like, then uploading a template so we know what you're talking about would be appreciated by many.

I also am thinking it would be interesting to see what kind of "frankenspikes" people come up with.

For example, I saw a spike on one saw that another member had, and it was on a Pioneer. I like the design of the spike, but obviously, no one sells it to fit on the McCulloch 600/700/800 series saws.

That's where the template comes in, I can trace the spike pattern off the Pioneer spike, then trace the bolt pattern off the Mac spike. Simply draw a couple of lines to connect the traced patterns and use the template to cut a spike out.

So, if we share spike templates, we could create a virtually endless "aftermarket" spike supply, and maybe even make spikes that literally are one-off by making "frankenspikes"

Anyone with me?

edit: P.S. Thickness of spikes would be good info too.

 

[little possum]

Sounds ok, sometimes I cant get things to print to scale though.

Ive got the S1050 big dawg, and a few ol Macs, and the XL-12 dawg, and a WC setup for the 288.. Ill see what I can do

 

[Arrowhead]

Did the Pioneer spikes look like these?

 

[farrell]

Holy dawgs!!!!

 

[Roanoker494]

Sounds ok, sometimes I cant get things to print to scale though.

Ive got the S1050 big dawg, and a few ol Macs, and the XL-12 dawg, and a WC setup for the 288.. Ill see what I can do

Trace out your template, scan it into your computer and then create a PDF file of it. Print it out at 100% to check your dimensions.

 

[atvguns]

subscribed

 

[blsnelling]

Ive got the S1050 big dawg, and a few ol Macs, and the XL-12 dawg, and a WC setup for the 288.. Ill see what I can do

 

[little possum]

See, told ya Id come up with the S1050 big dawg

Brad

Id like to find the 288 outer dog for the WestCoast

 

[Husq445]

390xp Dawgs

Here are the dawgs that I made a couple of weeks ago for my 390xp out of stainless steel.

Here they are next to a set of factory sized big dogs.

 

[Roanoker494]

Here is a pdf of the dog from my XP1000 that I just got from fellow member HOSS. Turns out the program that came with my Canon MP560 will automatically build the pdf file for me. Let me know if this worked correctly.

Brad,
This looks like your 1050 "Big dawg"

EDIT:
For further information the spikes is 1/8" thick steel.

 

[promac850]

This may become a good thread... opcorn:


Arrowhead, those spikes are even bigger! :msp_drool:

Roanoker, thanks!! I will be using that template soon.

All others, thanks as well, I plan to have a folder of spike templates... that's the idea. Spikes, spikes and more spikes... I figure it could be valuable information and templates for future saw lovers.

 

[promac850]

Here are the dawgs that I made a couple of weeks ago for my 390xp out of stainless steel.

Here they are next to a set of factory sized big dogs.

:msp_drool: Those are beautiful! :msp_drool: Be careful around those things... don't need to lose a finger now...

 

[knockbill]

Here are the dawgs that I made a couple of weeks ago for my 390xp out of stainless steel.

very nice!!!! you must have a water jet in teh garage....

 

[Biker Dude]

What a great idea, I'm going to try it. Anyone got a spike template for the Homelite 360?

 

[heimannm]

Here are a few options for the large McCullochs, and for the Jonsered 900 Series saws.

Mark

 

[Miles86]

Those Pioneer spikes are perfectly shaped. I still regret not being able to buy a pioneer (or Poulanpro version).

 

[Biker Dude]

Here's one for Lombard Comango & AP42

 

[tdi-rick]

Modified Dolmar/Makita 64/73/7900 spikes are here http://www.arboristsite.com/chainsaw/142840.htm

They were a test before I get some cut out for real and they appear to work well.

I'll find the tracings and scan and post later.

 

[ChrisF]

Modified Dolmar/Makita 64/73/7900 spikes are here http://www.arboristsite.com/chainsaw/142840.htm

They were a test before I get some cut out for real and they appear to work well.

I'll find the tracings and scan and post later.

Looks really good.

 

[MnSam]

Here's one for Lombard Comango & AP42

You wouldn't happen to know what the Lombard F-54 spikes looked like would you?