flashpuppy
ArboristSite Operative
And I just want quantitative information. What safety chain vs what non safety chain (rmc3 vs a custom done Redprospector race chain?). What size saw? Is it tuned right? What type of wood?
What is the real speed penalty with "safety" chain?
- Thread starter brages
- Start date
Help Support Arborist Forum:
And I just want quantitative information. What safety chain vs what non safety chain (rmc3 vs a custom done Redprospector race chain?). What size saw? Is it tuned right? What type of wood?
:notrolls2::notrolls2::notrolls2::notrolls2::notrolls2:
kstill361
ArboristSite Operative
Since when did the amount of cutting you do regulate your interest in cutting speed...? :greenchainsaw:
And, at present, I have five chains for my little Stihl!
A good experiemnt would be:
Stihl RSC vs. Stihl RSC3... on a stock good-running MS361 with a 20" bar cutting dry 18" oak...
Really, a fair experiment just needs to be a properly functioning saw in reasonable-sized wood with two equivalent new chains.
Nuzzy
Trail Gnome
Here's a thought. Pry open your wallet and try both. Then figure out which one YOU like better.
As for the rest of us, we'll just stick with non safety chain thank you.
As for the rest of us, we'll just stick with non safety chain thank you.
Here's a thought. Pry open your wallet and try both. Then figure out which one YOU like better.
As for the rest of us, we'll just stick with non safety chain thank you.
+1
catman963
ArboristSite Guru
Here's a thought. Pry open your wallet and try both. Then figure out which one YOU like better.
As for the rest of us, we'll just stick with non safety chain thank you.
:agree2: Well said man!!
Rep sent!
wood4heat
Addicted to ArboristSite
- Joined
- Jun 26, 2007
- Messages
- 2,832
- Reaction score
- 1,511
I'm still running the original safety chain my saw came with but it's about due for a new one. (my britches are mint flavored ) I was given an extra chain by the dealer but was disappointed to realize it's also green. I'll prolly buy a new chain this spring and keep my freebie greenie as a spare, maybe I'll run it against the new chain once for comparisons sake. If we're all still around I'll report my findings later this year. 
) I was given an extra chain by the dealer but was disappointed to realize it's also green. I'll prolly buy a new chain this spring and keep my freebie greenie as a spare, maybe I'll run it against the new chain once for comparisons sake. If we're all still around I'll report my findings later this year.
Last edited:
MCW
Somebody's talking crap here & it ain't the tree!
I had some guard link 44DL 3/8"LP chain given to me. I decided to give it to a mate who has a citrus orchard to use it on his 200T pruning saw. After using both types of chain he threw the guard link in the bin, ran it over with his tractor, doused it in petrol and then caught it alight. He reckons it cut that poorly that he never wants to see it again. Just a thought...
I know you should never get to cocky but I've never been concerned with kickback. I know it can happen but I believe that if using a chainsaw properly and not being stupid the likelihood of wearing a bar in the face at full tilt is pretty slim. You're more likely to cut your leg off.
How many people reading this have ever had bad enough kickback to wear one in the head/helmet? Honest question as I'd like to know for my interest.
I know you should never get to cocky but I've never been concerned with kickback. I know it can happen but I believe that if using a chainsaw properly and not being stupid the likelihood of wearing a bar in the face at full tilt is pretty slim. You're more likely to cut your leg off.
How many people reading this have ever had bad enough kickback to wear one in the head/helmet? Honest question as I'd like to know for my interest.
Last edited:
I forgot to mention that postings that I have seen rejecting low-kickback chain often seem to contain some element of macho posturing.
flashpuppy
ArboristSite Operative
I forgot to mention that postings that I have seen rejecting low-kickback chain often seem to contain some element of macho posturing.
I don't think that's it at all. I think it's more like you are going to a race car forum and asking about fuel efficiency...
Raymond
Addicted to ArboristSite
For a Ford escort:hmm3grin2orange:
Safety Chain??
I switched from Oregon 72LP to 33RSC and to me, the saws now cut faster.
However, I would not want either of my adult sons to run one of my saws with this chain because they do not have enough experience, and most likely never will. They don't cut wood.
I switched from Oregon 72LP to 33RSC and to me, the saws now cut faster.
However, I would not want either of my adult sons to run one of my saws with this chain because they do not have enough experience, and most likely never will. They don't cut wood.
flatpikr
ArboristSite Operative
The safety chain - or whatever the hell it is-- that came on my 5100 SUCKS!! My first time out with it I thought I must have dulled it after only a few cuts. I changed to my usual straight SC and finished out a good day of cutting. Yesterday, I started to cut with my Dolmar (first time since last year) and noticed the freshly sharpened chain was throwing very pathetic looking chips and a lot of dust. I looked closely at it and realized it was the chain that came on the Dolmar-- at home I had tried to modify the rakers and resharpen. Still sucks like a black hole. Maybe noobs should use a safety chain. After 30+ years of running saw- all I can say is -- you can have safety chain. BTW- it's my understanding that safety chain can also kick you in the teeth. Call me if that happens, I'm easy, but I'm not cheap. I haven't had a brewski since last year; after wood cutting yesterday, I almost caved in. SN ESB will probably make my knees buckle. If I seem to be rambling that's because my wife just gave me an espresso and I'm jammin' on the keyboard. Think I'll grab my geetar. Later.
I think if you limited your original post as above, and left out the opinion part, you might not have got such opinionated replies. Live and learn.
I will try to do a comparison, like I said.
