What Stihl for a 28 inch bar?

[Hermio]

Or I can just run the larger saws rated to pull longer bars which has been working for me. the 592XP pulls a 24" bar just fine with a 8 pin.

Well yes, if you have larger saws also. That information was not stated.

 

[Evan]

Id pick any semi current 70cc saw.
461 462 500i etc.
Im currently running my 461 with just a muffler and pop up piston. Its working well in idaho on big firs and pines.
I also run a 372 piped and ported with a 28, that saw rips and loves high rpm with sharp chain.
The 461 has more grunt on the bottom the 372 is even getting tired, been running it balls deep for 6 or 8 years.

I wouldnt concider anything smaller. Have a 026 alittle modded that i run a bit to clear dirt bike trails. But it never comes with me when cutting firewood

 

[Iffykid]

Well yes, if you have larger saws also. That information was not stated.

044 is my all time favorite saw with a 20" bar it might pull a 24-28" but I dont think I would be happy with it.

28" bar and our hardwoods oak, maple, ash it is either bigger 70cc or 90cc saws, 460, 461, 372,572, 660,395,592 for me.