My dad burned wood for over 30 years. Used to cut all the standing dead out back every fall, so there was no seasoning involved. As he got older, it got tougher and tougher to cut, split, stack, and eventually even start the chainsaw.
When we moved in here 20 years ago, oil was $1.50 a gallon. I worked 50+ hours a week driving trucks, so dealing with wood was not something I ever considered, knowing the work involved growing up with it as a constant heat source. Was easy for me to turn the t-stat. Then in winter of '04-'05, after going through 5 tanks of oil to freeze our ***** off in this old, leaky house, I bought a coal stove in fall 2005. Been burning coal since.
We have 2.5 acres, but the property is wide, and doesn't go very far back. I'd burn through every tree on this property in 3 seasons flat, IF I was lucky and we had 3 warmer winters. Plus I'd have to cut it all on a nearly 45° slope. No thanks!!
That first stove was handfired. Ran that until 2008 when I upgraded to a much bigger handfired unit. 5 years after that, I was tiring of dealing with a handfired stove, even if I only had to load it every 24 hours (or sooner in real cold weather). I was running all day long on a city recycling route, so I'd be BEAT every night (plus I about drank myself unconscious every night to deal with this awful hellhole of a city I had to work in). I had a bad batch of coal that season with many rocks, shale, and trash that jammed the grates open on me .. always at midnight when I was exhausted (and drunk). Ended up selling that one and installing a custom built stoker boiler a buddy of mine got for me. Ran that for 8 years, then the unthinkable happened - oil was CHEAP again! At least for a few years.
Then July 2021 came, and I had an opportunity to buy a boiler setup I had been lusting after for years, but never thought I'd find nor afford - an EFM520 Highboy. Another buddy sold that one to me. Only catch was, I had to take a 12 hour drive ONE WAY south to NC to grab it. The massive beast was built in 1951, and restored around 2010. Just last month I finally got that beast set up in my basement. The boiler alone weighs 1,150 pounds, give or take!! It was one of the toughest jobs I've EVER done to get heat in a building! It fell down the stairs from the halfway point and smashed into the fieldstone foundation after ripping a plank right out of the studs! BANG!! Saved us an hour or so of labor anyway.
Now coal is $500 a ton! Double what I paid in 2019, but #2 heating oil would have to be less than $3.60 a gallon to make oil cheaper. Right now it's $4.15 or higher in my area. I've thankfully got enough stockpiled here to get through next season as well, thankfully. Hopefully by then there will be some sanity, not only in heating costs, but in our government as well. I won't hold my breath on either. Hope for the best, plan for the worst.
Absolute worst case, I could burn wood pellets, or even wood in this unit with some minor modifications.
View attachment 1044361View attachment 1044362View attachment 1044363View attachment 1044364View attachment 1044365View attachment 1044366View attachment 1044367View attachment 1044369View attachment 1044370View attachment 1044371