thombat4
ArboristSite Guru
For that price I'll definitely give it a shot.
Wood hauler engine smoking
- Thread starter thombat4
- Start date
Help Support Arborist Forum:
For that price I'll definitely give it a shot.
ASEMASTER
ArboristSite Operative
try this first
shut off the gas and run the cab out of fuel at a high rpm this will some times clrae out the dirt in the needle and keep the carb from flooding, this used to work on the old quadra jets after a fuel filter change.
shut off the gas and run the cab out of fuel at a high rpm this will some times clrae out the dirt in the needle and keep the carb from flooding, this used to work on the old quadra jets after a fuel filter change.
Jkebxjunke
*Politically Incorrect*
does anyone think that if you could put a fuel filter inline between the tank and carb? if you can fit it in there.. just a thought...
bullseye13
ArboristSite Guru
I dont see a reason why not, but there should be one on the fuel system already, weather it be under the tank shutoff or an inline filter, if there is not an inline filter, put one in or replace the existing one.
Although shutting the fuel off at the shutoff may loosen a piece of dirt from the needle which may be a cause of the problem, it dosent correct the fact that dirt will still exist elsewhere in the fuel system if the carb is not cleaned/filter replaced.
Jkebxjunke
*Politically Incorrect*
the kohler that is on my splitter is rather old.. and they didnt use filters and has a steel line... I am thinking of doing a redo of some things and I may try to put a filter on it.
streeter
ArboristSite Operative
Just rebuid the carb!! and put in a shut off valve. reason being.....
The carb has lots of sediment in it, which causes float to stick which causes BLACK smoke. I am sure it has not been touch in eons and only parts cost is $15 bucks plus a can of carb cleaner. Upon rebuilding it put in a cheap fuel shut off valve ($5.00).
thombat4
ArboristSite Guru
This sounds very doable...now I have a legit reason to hang out in the garage! Should be very straightforward.
streeter
ArboristSite Operative
thombat4
ArboristSite Guru
I did not mean to sound mean I just reread my post. I guess I was in a bad mood
Didn't come across that way to me. Thanks for the advice!streeter
ArboristSite Operative
Good, cause I have been in a foul mood..LOL
Let us know when you get it back together. I really want to se if you set the float corretly
thombat4
ArboristSite Guru
Good, cause I have been in a foul mood..LOL
Let us know when you get it back together. I really want to se if you set the float corretly
I'll keep you posted...For an old engine it's been virtually trouble free up to now.
jerry wayne
ArboristSite Operative
Mines Too
ITS PROBABLY BECAUSE OF THE COLD,I KNOW MINE TAKES A WHILE LONGER WITH THE GLOW PLUGS RUN OVERTIME,AND SHE SMOKES AND PUKES LIKE A BANCHIE TILL SHE GETS ALL WARMED UP....KINDDA LIKE THE WIFE
When I start my tractor lately it sputters and blows black smoke. Any engine savvy folks here have any advice or tips that I can use to diagnose the trouble? After about a minute it clears up and runs fine. It's a Jacobsen 1650 with a Kohler K341 engine if that helps. Thanks guys.
ITS PROBABLY BECAUSE OF THE COLD,I KNOW MINE TAKES A WHILE LONGER WITH THE GLOW PLUGS RUN OVERTIME,AND SHE SMOKES AND PUKES LIKE A BANCHIE TILL SHE GETS ALL WARMED UP....KINDDA LIKE THE WIFE
thombat4
ArboristSite Guru
ITS PROBABLY BECAUSE OF THE COLD,I KNOW MINE TAKES A WHILE LONGER WITH THE GLOW PLUGS RUN OVERTIME,AND SHE SMOKES AND PUKES LIKE A BANCHIE TILL SHE GETS ALL WARMED UP....KINDDA LIKE THE WIFE
:hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange:
avalancher
Arboristsite Raconteur
ITS PROBABLY BECAUSE OF THE COLD,I KNOW MINE TAKES A WHILE LONGER WITH THE GLOW PLUGS RUN OVERTIME,AND SHE SMOKES AND PUKES LIKE A BANCHIE TILL SHE GETS ALL WARMED UP....KINDDA LIKE THE WIFE
Caps off, no need to shout.
The the OP has a gas engine, you have a diesel if you have glow plugs. Diesel requires heat for ignition, gas requires spark.Hence you may have incomplete combustion when its cold, but the OP isnt suffering from temp related issues.
Thombat, I have been reading the specs and some of the old reliability reports that Kohler gets about your engine, and it sounds like you got a good one there. I wish that the trash that Kohler makes now would be half as good as the model that you have. I paid big bucks for the Kohler that I have now, and would trade it in an instant for something else. About all its good for is a boat anchor.
Last edited:
thombat4
ArboristSite Guru
+1 avalancher those K series engines may well have been some of the best put out by Kohler. I've been running this tractor for 30 years and it's been very reliable. Went through a couple plugs and starters but the engine itself has been rock solid
avalancher
Arboristsite Raconteur
+1 avalancher those K series engines may well have been some of the best put out by Kohler. I've been running this tractor for 30 years and it's been very reliable. Went through a couple plugs and starters but the engine itself has been rock solid
A couple of plugs eh? Try this.
4 sets of plugs.
8 head gaskets and bolt kits.
Two new heads.
Engine caught fire twice from carb backblow.Hence the new wiring kit.
1 new coil.
With a little over 200 hours on it.
Boat anchor, period.
