"You Suck" Thread 2016--Pics required!

[SteveSS]

Home Depot here tosses them and wont sell to the public, have asked at multiple stores,, now that sucks!!!
BBB

Maybe ask if they'll allow you to carry them out to the dumpster for them free of charge.

 

[Guido Salvage]

I like the middle file

Nicholson Three Square Smooth Cut, I think it sells for north of $20.

 

[bikemike]

Nicholson Three Square Smooth Cut, I think it sells for north of $20.

I have one similar to it 1/4 per side works great for 201Turd flywheels

 

[USMC615]

Just got this new flown once airframe servos electric retracts and a jett 50 nitro engine for tRade of my 55cc gasser engine View attachment 477950 It flew nice and fast but not fast enough at 120mphView attachment 477952 when I'm done it should look like dusty crop hopper from planesView attachment 477953

Nice...good score. I do quite a bit of flying myself, time permitting. All of mine are scale WWII fighters with the exception of a T-28.

 

[bikemike]

Nice...good score. I do quite a bit of flying myself, time permitting. All of mine are scale WWII fighters with the exception of a T-28.

Cool flying is fun it's been a year since I flown but I'm more sport and 3d only war bird I had was a .15 .20 p51 combat with custom rudder and non scale landing gear with a evolution 36 wedge in it and all metal gear servos, it was heavy and too fast for the air foil.

 

[bikemike]

Russia cracks me up

 

[SuperiorStihl]

That was pretty ingenuitive actually...

 

[Marine5068]

Just picked this up from a fellow nearby for $350 CAD. Runs good, but needs a carb clean up and chain sharpened. Looks like a new 18" bar and chain though. I'm happy.

 

[USMC615]

Just picked this up from a fellow nearby for $350 CAD. Runs good, but needs a carb clean up and chain sharpened. Looks like a new 18" bar and chain though. I'm happy.

View attachment 478665 View attachment 478666

Nice...good suckage score.

 

[Chris J.]

Home Depot Makita 6421 score. Free. Saw was straight gassed so needed a new P&C. Got the OEM 79cc kit (thank you fordf150!). Still working on it, hope to have it up and running in another week or so. Also, special thanks to psuiewalsh for hints and tips while I've been working on it.

View attachment 477737 View attachment 477736

Free? You scored enough You SUCK! points to last at least through June 2016.

 

[dynodave]

3 Jan...free from friend. McCulloch 7-10A
Poured about 1/4 cup of water out of gas tank , cleaned carb , put mix in and it fired up. Washed oil tank and filled and it oils the bar OK.

 

[USMC615]

3 Jan...free from friend. McCulloch 7-10A
Poured about 1/4 cup of water out of gas tank , cleaned carb , put mix in and it fired up. Washed oil tank and filled and it oils the bar OK.

Nice...should buy your buddy a cold twelve pack for that SUCK score. I can see some old school Mac fellas thinking the same.

 

[Josh B.]

Just picked this up from a fellow nearby for $350 CAD. Runs good, but needs a carb clean up and chain sharpened. Looks like a new 18" bar and chain though. I'm happy.

View attachment 478665 View attachment 478666

Nice saw...you suck

 

[Backyard Lumberjack]

Nice...good score. I do quite a bit of flying myself, time permitting. All of mine are scale WWII fighters with the exception of a T-28.

can you post up a pix of the T-28?

'u-u-Rah!"

 

[Backyard Lumberjack]

$115.00!

 

[JackOrwickUSMC]

I'm new to the game but I think this counts. Efco 165 for $75 on craigslist only issue was a hole air cover that I patched with JB weld. I also had one question on it. Is the 06-06 the build date( my apologies for the pic being upside down)

 

[yepper]

Gotta give it a soft bed of noodles to take a break on! I've been working a steady gig down in Chester VT roughing out wood blocks for a chainsaw carver. Some of the logs are 3' diameter or better and I can noodle these blocks out much more accurately with a long bar so finally I can justify a big saw as more than a toy. This was $600 at The Chainsawr, living in the same state as their physical store is nice. I've had it about a week but just noticed today that the recoil housing says made in West Germany, so I guess that dates it as a pretty early one. Runs like a top and noodles with the 24" like butter.

 

[pcrevelli]

$115.00!

View attachment 479491

View attachment 479492

You suck. If it runs, you really suck.

 

[Sparkysparks9]

$115.00!

View attachment 479491

View attachment 479492

You really suck!!

 

[bikemike]

Put noodles n company out of business