"2015 You Suck Thread"-Pictures required

[Chris_In_VT]

Yea, the black paint is not very durable. That 2171 is in NICE shape!!

I'm thinking that the crank was probably factory defective. Ran it, and one day it wouldn't pull over I don't know. Piston was still usable, jug had a tiny bit of transfer but no scratches.
How would a crank get killed in 10 tanks of fuel or less, and still have the piston\cylinder be in reasonable shape (compared to the crank)?

Oh well, good for me, I got a sweet 2171 now

 

[raumati01]

The stihl 024 and 08 I scored , the 024 was $45 and the 08 was $20. The 024 runs well, the 08 doesnt but I need it for parts.

 

[nstueve]

If you clear your throat it will run too lean for my liking.

A little bit of phlem will keep you 4 stroking nicely.

I don't know what you guys are talking about.? You turn it on with a switch underneath and it has an on-board sound maker that activates at full throttle!!!


Sent from my iPhone using Tapatalk

 

[nstueve]

Freebie!!!! I have like 6-7 of these little gems now! This one needs coil wire AF and AF cover.

The freebie isn't the best part though... The freebie makita 520i came when I got this pair of grinders! I won't say what I paid b/c I would be shunned from this site. [emoji38]

If you don't know what they are... Don't ask!

You shouldn't be on this site if you don't!


[emoji12][emoji12][emoji12][emoji12][emoji12][emoji12]


Sent from my iPhone using Tapatalk

 

[B-N]

I don't know what you guys are talking about.? You turn it on with a switch underneath and it has an on-board sound maker that activates at full throttle!!!


Sent from my iPhone using Tapatalk

So how do you like the Autotune? I hear lots of good things about it.

How do you like your 520i's? The specs look promising on them. If they are Half the saw that the 6000i is they are alright with me!

 

[bikemike]

Oh i forgot to ask what brand are you orange meat slicers lol

Freebie!!!! I have like 6-7 of these little gems now! This one needs coil wire AF and AF cover.

The freebie isn't the best part though... The freebie makita 520i came when I got this pair of grinders! I won't say what I paid b/c I would be shunned from this site. [emoji38]

If you don't know what they are... Don't ask!

You shouldn't be on this site if you don't!


[emoji12][emoji12][emoji12][emoji12][emoji12][emoji12]


Sent from my iPhone using Tapatalk

 

[nstueve]

Silvey 300 round grinders


Sent from my iPhone using Tapatalk

 

[jeff taswelder]

Just got me a solo 680 for $225.

 

[MustangMike]

Well, I think I finally got something I can enter ... paid $150 for a non running MS-460 today. Pulled the muffler & inspected the slug & cyl and all looked good.

Pried the Comp Rel valve up with a screwdriver and replaced the old fuel with some fresh stuff, and she fired up!

It was powerhead only, I put the bar & chain on it just to try it out. It cut well!

It is no shelf queen, it is dirty & stained & rubbed & scratched, but nothing is cracked or broken!

I plan to send it on vacation to TN soon!

Hey wait, maybe Numa will trade me for his, so he can use it!!!!!

 

[bikemike]

You found gold buddy you can't pass up that for the price

Well, I think I finally got something I can enter ... paid $150 for a non running MS-460 today. Pulled the muffler & inspected the slug & cyl and all looked good.

Pried the Comp Rel valve up with a screwdriver and replaced the old fuel with some fresh stuff, and she fired up!

It was powerhead only, I put the bar & chain on it just to try it out. It cut well!

It is no shelf queen, it is dirty & stained & rubbed & scratched, but nothing is cracked or broken!

I plan to send it on vacation to TN soon!

Hey wait, maybe Numa will trade me for his, so he can use it!!!!!

 

[B-N]

Well, I think I finally got something I can enter ... paid $150 for a non running MS-460 today. Pulled the muffler & inspected the slug & cyl and all looked good.

Pried the Comp Rel valve up with a screwdriver and replaced the old fuel with some fresh stuff, and she fired up!

It was powerhead only, I put the bar & chain on it just to try it out. It cut well!

It is no shelf queen, it is dirty & stained & rubbed & scratched, but nothing is cracked or broken!

I plan to send it on vacation to TN soon!

Hey wait, maybe Numa will trade me for his, so he can use it!!!!!

You suck

 

[bikemike]

Glad its not a shelf quenn means you won't have any issue running the snot out of it i like ugly saws they seem to cost less and run better[ QUOTE="MustangMike, post: 5427340, member: 120204"]Well, I think I finally got something I can enter ... paid $150 for a non running MS-460 today. Pulled the muffler & inspected the slug & cyl and all looked good.

Pried the Comp Rel valve up with a screwdriver and replaced the old fuel with some fresh stuff, and she fired up!

It was powerhead only, I put the bar & chain on it just to try it out. It cut well!

It is no shelf queen, it is dirty & stained & rubbed & scratched, but nothing is cracked or broken!

I plan to send it on vacation to TN soon!

Hey wait, maybe Numa will trade me for his, so he can use it!!!!![/QUOTE]

 

[MustangMike]

Yea, I prefer the Ugly Ducklings myself, a lot less worry when you use it!

 

[Ironworker]

Yea no problem give me the saw and $975.

 

[fd3466]

Picked this 461 up off cl for $300 with an extra chain

 

[bikemike]

Shop vac

 

[MustangMike]

Picked this 461 up off cl for $300 with an extra chainView attachment 433352

Can't beat that, great deal!

 

[bikemike]

[How much does that cost with shipping QUOTE="fd3466, post: 5429779, member: 131987"]Picked this 461 up off cl for $300 with an extra chainView attachment 433352[/QUOTE]

 

[fd3466]

[How much does that cost with shipping QUOTE="fd3466, post: 5429779, member: 131987"]Picked this 461 up off cl for $300 with an extra chainView attachment 433352

[/QUOTE]

 

[Welder56]

Picked up this raft of 254xp and 262xp parts for $75 today.


Eyes went big when I seen this


All are good but the one with decomp. Gonna have fun building a 254xp