build off challange

[MacLaren]

I'd put money on a ported 395 beating a ported 660.

Again, Id put money on a tree monkey ported 395 beatin a tree monkey 660. I just dont think a pop up 395 would handle a tree monkey 660.

 

[MacLaren]

I could weigh my 372XP and 390XP, except that my 390 is in minus it's topend right now, lol.

LOL, No worries.

 

[blsnelling]

Popup vs flattop isn't going to make that much difference. Doubt you could tell the difference. JMHO.

 

[WoodChuck'r]

JMHO.

Just Mated a Horny Ostrich....??


Gross.

 

[blsnelling]

Just Mated a Horny Ostrich....??


Gross.

Only you could come up with something like that:msp_w00t:

 

[MacLaren]

Popup vs flattop isn't going to make that much difference. Doubt you could tell the difference. JMHO.

Oh yeah ya can Brad. My tree monkey 660 smoked my copsey 2171 by over 10 seconds thru a white oak log.....and another thing regarding the ported 660 395 thing. Just ask Heavy Fuel if he has out ran any 394's with his tree monkey 064......and a 372....and a 288.....Thats not directed at you specifically Brad. Just sayin that yes, a ported 395 394 and 2094 for that matter have all been beaten by tree monkey 660's and 064's.....

 

[blsnelling]

I would hope a 660 would be faster through a big Oak log than a 2171. I'm just saying, I don't believe it's the popup. Do you have vids of the 2094 in the same log as the 066?

 

[MacLaren]

I would hope a 660 would be faster through a big Oak log than a 2171. I'm just saying, I don't believe it's the popup. Do you have vids of the 2094 in the same log as the 066?

yes. and yes. Brad your the very one thats told me before that the 2171 should be as fast as the 660. Im callin major bullchit on ya brad. When i did my 660 thread you were sayin that a good ported 70cc saw should be as fast a ported 660 thru a 25" log. Remember?

 

[blsnelling]

Perhaps I'm remembering the log bigger than I thought it was. Reguardless, I have a 066 with your name on it Better be ready at Jeremy's GTG

 

[MacLaren]

Perhaps I'm remembering the log bigger than I thought it was. Reguardless, I have a 066 with your name on it Better be ready at Jeremy's GTG

thats cool man. I came off too strong. At any rate, I truly believe the cumbustion port is far superior to pop up porting. Thats all. I think we can agree to disagree on this one.

 

[blsnelling]

Hey, and take it easy using my initials in vane!:biggrin:

 

[blsnelling]

thats cool man. I came off too strong. At any rate, I truly believe the cumbustion port is far superior to pop up porting. Thats all. I think we can agree to disagree on this one.

Too that end, I'm doing the squish band in my 390, but I don't yet believe it makes that much difference, at least not at this level of a work saw.

 

[blsnelling]

I think we can agree to disagree on this one.

I'm not saying it's not better. I'm imagine it probably is. I just don't think that's what it takes to build a strong saw.

 

[mdavlee]

I think someones 395 will be real close to the 066/660s if not stronger.:msp_rolleyes:

So we need to get dates set for the other build offs that were planned and see what will work for this one. I hope the dates work out so I can participate in it. I really would like to attend even if I can't get a saw done in time.

 

[jropo]

I could weigh my 372XP and 390XP, except that my 390 is in minus it's topend right now, lol.

Husky 390xp 390xpg 390xpw 372xp 372xpw
Weight excl. bar and chain, lbs. 15.6 15.9 15.9 13.4 13.8

2011 Husqvarna Product Range.

 

[jropo]

oopps Thats not the way I typed it.

 

[blsnelling]

I think someones 395 will be real close to the 066/660s if not stronger.:msp_rolleyes:

So we need to get dates set for the other build offs that were planned and see what will work for this one. I hope the dates work out so I can participate in it. I really would like to attend even if I can't get a saw done in time.

I haven't even started on my 064/066. Yes, it's ported, but I don't think it's a contender at this point. I've got a good idea where I'm going with it though.

 

[parrisw]

I know what ya mean. But what Im sayin and what i said earlier, as long as Scott does his magic is what matters IMO and experience. In other words had the 2094 or a 395 been ported by Scott, i feel it would have prolly beaten the 660 as well. That 660 just beat a ported 2094.....again, i guess it comes down to the pop up style portin versus the combustion chamber style porting Scott does. From what saws ive had it, the combustion style portin is way stronger than pop styles that Ive had.....

Those are some pretty lofty claims there. Didn't know your tounge could reach Scott's cornhole from that far away. FYI, Scott isn't the only one that cuts combustion chambers.

FYI, when I wanted some info and a little help doing it Eric Copsey stepped up and helped where Scott would not.

 

[mdavlee]

Husky 390xp 390xpg 390xpw 372xp 372xpw
Weight excl. bar and chain, lbs. 15.6 15.9 15.9 13.4 13.8

2011 Husqvarna Product Range.

16.2 ??? 16.9 14.2 14.9 is what I've got for them when I owned them.

I have a 066 I hope to get done. We'll see where it ends up. It has a mahle jug with decent timing.

 

[parrisw]

Oh yeah ya can Brad. My tree monkey 660 smoked my copsey 2171 by over 10 seconds thru a white oak log.....and another thing regarding the ported 660 395 thing. Just ask Heavy Fuel if he has out ran any 394's with his tree monkey 064......and a 372....and a 288.....Thats not directed at you specifically Brad. Just sayin that yes, a ported 395 394 and 2094 for that matter have all been beaten by tree monkey 660's and 064's.....

You shouldn't make yourself sound stupid. Get real man. compare two completely different saws, and that's how you come to a conclusion on who is a better builder?

Sometimes its better to remain quiet and let people think your a fool, then to open your mouth and remove all doubt!!