Central Va./Dinosaur50 GTG 2012

[Roanoker494]

New seals for the Husqvarna 2100 should be in the mailbox when I get home, the intake boot for the Homelite 750 is on the way and everything else should be ready to go because I just rebuilt most of the fuel systems late last year. Just bought a 92cc Poulan 47 that I hope gets to make it and, just this evening, bought a McCulloch PM1000 on Ebay that is suppose to be ready to go.

 

[Pioneer fan]

Nice! Looks like this GTG is going to have a wide array of different saws. Gonna be fun:hmm3grin2orange:


And Roanoker494, I like the bold line in your signature. It is exactly what i am doing now, lol.

 

[thomas1]

New seals for the Husqvarna 2100 should be in the mailbox when I get home, the intake boot for the Homelite 750 is on the way and everything else should be ready to go because I just rebuilt most of the fuel systems late last year. Just bought a 92cc Poulan 47 that I hope gets to make it and, just this evening, bought a McCulloch PM1000 on Ebay that is suppose to be ready to go.

PM1000 races at the GTG?

 

[Pioneer fan]

the rings i found are not for a 47, they are for something larger, dont know what. the thickness is the same, so i am going to attack them with a file, and see if they will go.:hmm3grin2orange: just a shade to large to fit in the bore

 

[dinosaur50]

for all comeing 2 gtg bring some money if you want chainsaw carvings done

for all comeing 2 gtg bring some money if you want chainsaw carvings done not only are 2 of the best chainsaw carvers comeing in the usa but they will have some for sale and they will take orders 2 at the gtg and they will be carving some at the gtg 2 and now 2 let you know who the carvers are we got Randy Everett he form nc and one of the best chainsaw cavers in usa and form va Tommy Winn both are 2 of the best chainsaw carvers in usa if any one was at the shout hill chainsaw carving event last july both wher thier both are 2 of the best at it so you know make sure 2 wacth them do it and like i said if you want 2 buy one you an thier and both will be takeing orders thier 2 at gtg both will be doing egales and bears form start 2 done and they will be doing them for a few hours each one they will be useing chainsaws of all szies and griders and dremal tools 2 and sanders and some outher stuff 2

 

[Roanoker494]

Instead of working on saws looks like I will be returning to a older mind set this week..........

Been years since I have done any real body work. My body tools include basic hand tools, hammer, chain and a 4x4 Cherokee or old tree stump..........

BTW my sister has owned this van for no more than two weeks.

 

[thomas1]

Instead of working on saws looks like I will be returning to a older mind set this week.....

Been years since I have done any real body work. My body tools include basic hand tools, hammer, chain and a 4x4 Cherokee or old tree stump..........

BTW my sister has owned this van for no more than two weeks.

Ouch! If you got a loop of that carbide chain maybe you could put the saws to use?

 

[igpoe]

Instead of working on saws looks like I will be returning to a older mind set this week..........

Been years since I have done any real body work. My body tools include basic hand tools, hammer, chain and a 4x4 Cherokee or old tree stump..........

BTW my sister has owned this van for no more than two weeks.

In the last year your sister has made good use of your spare time,LOL!!!!!!!!!!!! What else are sisters for..............right? Just kidding. I hope when you get to the GTG
you'll be sporting some of those new saws and also have a running Mall 11, Stihl 070bowsaw, and a running DO-100. I've been fighting my Mall 11 for over a week :Mall 11 bowsaw - YouTube, finally got 'er going after a new coil,condenser and four (4) flywheel keys!
Igpoe

 

[Pioneer fan]

Don't feel bad, Roanoker. I went out to the shop to find a piece i was missing on the PM610, and ended up cleaning the entire place. Sheez, I did not realize it had gotten that messy in there. Parts and tools thrown everywhere.:msp_scared: I could not have found my head or butt, if it were not attached...lol Been on it since 10 this morning, and not done yet.I will get back on saws as soon as i get this place where I can actually do something.

And I still have not found what i started looking for:help:

 

[dinosaur50]

olny a few more weeks go i know i cant wait 2 go

olny a few more weeks go i know i cant wait 2 go about 5 weeks 2 go all i know i cant wait for gtg 2 time 2 come it going 2 be the best gtg in the world lets make it the biggest and best gtg in world all you collectors out thier this is the gtg for you for sure thier will be lots of antique chainsaws at the gtg .

 

[Rudedog]

for all comeing 2 gtg bring some money if you want chainsaw carvings done not only are 2 of the best chainsaw carvers comeing in the usa but they will have some for sale and they will take orders 2 at the gtg and they will be carving some at the gtg 2 and now 2 let you know who the carvers are we got Randy Everett he form nc and one of the best chainsaw cavers in usa and form va Tommy Winn both are 2 of the best chainsaw carvers in usa if any one was at the shout hill chainsaw carving event last july both wher thier both are 2 of the best at it so you know make sure 2 wacth them do it and like i said if you want 2 buy one you an thier and both will be takeing orders thier 2 at gtg both will be doing egales and bears form start 2 done and they will be doing them for a few hours each one they will be useing chainsaws of all szies and griders and dremal tools 2 and sanders and some outher stuff 2

Thanks for the info..

 

[Roanoker494]

In the last year your sister has made good use of your spare time,LOL!!!!!!!!!!!! What else are sisters for..............right? Just kidding. I hope when you get to the GTG
you'll be sporting some of those new saws and also have a running Mall 11, Stihl 070bowsaw, and a running DO-100. I've been fighting my Mall 11 for over a week :Mall 11 bowsaw - YouTube, finally got 'er going after a new coil,condenser and four (4) flywheel keys!
Igpoe

I feel bad for her because she had finally gotten a good dependable vehicle and procceded to wreck it. I have not personally seen the damage yet but I had my uncle take a look yesterday and he said the top of the radiator core support is pushed back a good 5-6", so I don't know if I will be able to save this one or not. Guess I will just start pulling it back out slowly and see where that gets me.

I have still never made time to put that 11 back together, but I am going to take a shot at it before GTG time, and the 070 still has the same clutch issue. I will have to get your DO-100 out and dust it off, it has been sitting on a shelf since I finished it up, I have yet to put it to any wood but it idles and accelerates well.

 

[mtfallsmikey]

for all comeing 2 gtg bring some money if you want chainsaw carvings done not only are 2 of the best chainsaw carvers comeing in the usa but they will have some for sale and they will take orders 2 at the gtg and they will be carving some at the gtg 2 and now 2 let you know who the carvers are we got Randy Everett he form nc and one of the best chainsaw cavers in usa and form va Tommy Winn both are 2 of the best chainsaw carvers in usa if any one was at the shout hill chainsaw carving event last july both wher thier both are 2 of the best at it so you know make sure 2 wacth them do it and like i said if you want 2 buy one you an thier and both will be takeing orders thier 2 at gtg both will be doing egales and bears form start 2 done and they will be doing them for a few hours each one they will be useing chainsaws of all szies and griders and dremal tools 2 and sanders and some outher stuff 2

They just do wildlife carvings?

 

[dinosaur50]

no they can do any thing you want them to do

no they can do any thing you want them to do .

 

[dinosaur50]

here rules for hotsaw

or for any raceing claase thier going 2 be 4 class and also the hotsaw class thier going 2 be a woods port class the the o to 55 cc class the 55 to 80 cc class and 80 to 130 cc class in the class saw most be ported no pipe it can run on raceing fule now thier 2 be hotsaw class saws most have pipe one for small saw they will be cutting 12 inch round 3 cuts aka cookies 6 inchs 2 make 3 cuts if you cut over the 6 inchs or you dq or if you cut out you dq i will be wacthing and checking line after each heat now for the open hotsaw class 16 inch round 3 cuts aka cookies 6 inch 2 make 3 cuts same thing about dq counts for all the class also thier will be a stock saw raceing 2 cuts 16 inch round wood same rules as above


also thier will be a antique chainsaw class plz see me at gtg if you have any qustions i know the rules will be useing thes rules There are many variations in the restrictions for this event and it is left up to the discretion of the individual contest to decide which apply. Among the possible restrictions are: a) Open Class in which the saw may be of any manufacture including snowmobile, motorcycle, go cart and chainsaw. Restricted to one cylinder, pull start saws. b) Modified Stock in which the saw must have originated as a chainsaw which was then modified. c) Stock Appearing in which the saw must have originated as a stock chainsaw and still appears to be one although it may be highly modified "under the covers". Tuned exhausts and uncovered carburetors would not be allowed. In each of these cases the power saw will be of contestants' choice but limited to one cylinder and must be manually started by the pulling of a cord.
Each Hot Saw may be used by only one contestant per contest.
Each saw should include a sprocket cover to keep thrown chains with the saw.
Excessive filing of the chain "side plates" should be disallowed for safety reasons.

 

[dinosaur50]

for chainsaw raceing events will be useing

starts with the saw off and on the ground, the competitor's hands must be resting on top of the block they are about to cut until the "GO" signal is given. On the signal "GO" the competitor reaches down and in one fluid motion starts and picks up the saw, he then proceeds to cut three slices off the end of the block, one down cut, one up cut, and one down cut. Time starts on the signal "GO" and ends when the third disk is completely severed that how it will be time and sarted

 

[igpoe]

or for any raceing claase thier going 2 be 4 class and also the hotsaw class thier going 2 be a woods port class the the o to 55 cc class the 55 to 80 cc class and 80 to 130 cc class in the class saw most be ported no pipe it can run on raceing fule now thier 2 be hotsaw class saws most have pipe one for small saw they will be cutting 12 inch round 3 cuts aka cookies 6 inchs 2 make 3 cuts if you cut over the 6 inchs or you dq or if you cut out you dq i will be wacthing and checking line after each heat now for the open hotsaw class 16 inch round 3 cuts aka cookies 6 inch 2 make 3 cuts same thing about dq counts for all the class also thier will be a stock saw raceing 2 cuts 16 inch round wood same rules as above


also thier will be a antique chainsaw class plz see me at gtg if you have any qustions i know the rules will be useing thes rules There are many variations in the restrictions for this event and it is left up to the discretion of the individual contest to decide which apply. Among the possible restrictions are: a) Open Class in which the saw may be of any manufacture including snowmobile, motorcycle, go cart and chainsaw. Restricted to one cylinder, pull start saws. b) Modified Stock in which the saw must have originated as a chainsaw which was then modified. c) Stock Appearing in which the saw must have originated as a stock chainsaw and still appears to be one although it may be highly modified "under the covers". Tuned exhausts and uncovered carburetors would not be allowed. In each of these cases the power saw will be of contestants' choice but limited to one cylinder and must be manually started by the pulling of a cord.
Each Hot Saw may be used by only one contestant per contest.
Each saw should include a sprocket cover to keep thrown chains with the saw.
Excessive filing of the chain "side plates" should be disallowed for safety reasons.

Michael, for each of these fellas bringing a $3000 hotsaw, is there going to be any "show" money? How many tropies and prizes of money can we expect you to provide?
Personally, I'm hoping to provide everyone a hot dog and a hamburger. Maybe everyone but David Harsh will get some baked beans. David is gonna call soon about a port-a-john. There will be wood there for every saw to cut. I expect our participants to enjoy themselves by their fellowship with each other. The saws will simply be the common denominator that brings us together. I hope you don't get disappointed when the entire world doesn't make it. It only takes a handfull of friends to make a successfull GTG.
We proved that last fall. This one will be bigger, yes, and we like that. But there's absolutely NO REASON to set ourselves up for DISAPOINTMENT. I know you're excited and full of anticipation, but please don't burst into flames!
Dean

 

[Rudedog]

I have no interest in racing. I will be talking too much for that. Looking forward to the hotdog.

 

[sawmandave]

or for any raceing claase thier going 2 be 4 class and also the hotsaw class thier going 2 be a woods port class the the o to 55 cc class the 55 to 80 cc class and 80 to 130 cc class in the class saw most be ported no pipe it can run on raceing fule now thier 2 be hotsaw class saws most have pipe one for small saw they will be cutting 12 inch round 3 cuts aka cookies 6 inchs 2 make 3 cuts if you cut over the 6 inchs or you dq or if you cut out you dq i will be wacthing and checking line after each heat now for the open hotsaw class 16 inch round 3 cuts aka cookies 6 inch 2 make 3 cuts same thing about dq counts for all the class also thier will be a stock saw raceing 2 cuts 16 inch round wood same rules as above


also thier will be a antique chainsaw class plz see me at gtg if you have any qustions i know the rules will be useing thes rules There are many variations in the restrictions for this event and it is left up to the discretion of the individual contest to decide which apply. Among the possible restrictions are: a) Open Class in which the saw may be of any manufacture including snowmobile, motorcycle, go cart and chainsaw. Restricted to one cylinder, pull start saws. b) Modified Stock in which the saw must have originated as a chainsaw which was then modified. c) Stock Appearing in which the saw must have originated as a stock chainsaw and still appears to be one although it may be highly modified "under the covers". Tuned exhausts and uncovered carburetors would not be allowed. In each of these cases the power saw will be of contestants' choice but limited to one cylinder and must be manually started by the pulling of a cord.
Each Hot Saw may be used by only one contestant per contest.
Each saw should include a sprocket cover to keep thrown chains with the saw.
Excessive filing of the chain "side plates" should be disallowed for safety reasons.

GO TO BED MICHAEL,, GEZZ:bang::bang::bang:

 

[dinosaur50]

i all reday know thier going 2 be 4 or 5 hotsaws thier

i ll redy know thier going 2 be 4 or 5 hotsaws thier