FarmerTec Huztl MS660 Updated Build Kit - Build Thread

[ammoaddict]

No I replace the gas cap with one from Amazon and the other parts I wrote off as being junk and modified

I ordered a cheap Chinese cap and chain adjuster from eBay, they both work. If others can do it, huztl can do it.
It's just the principal of the thing that makes me mad.
I doubt I will ever order from them again because of it.
It makes no sense why a business would take a chance on losing a customer over a few dollars worth of parts.

Sent from my Moto G (4) using Tapatalk

 

[ammoaddict]

I would complain and see what they said.
Bedford is right, if we all complain, they may get the message.

No I replace the gas cap with one from Amazon and the other parts I wrote off as being junk and modified

Sent from my Moto G (4) using Tapatalk

 

[Bedford T]

And work so hard at it. They have a routine and they stick to it.

It makes no sense why a business would take a chance on losing a customer over a few dollars worth of parts.

Sent from my Moto G (4) using Tapatalk

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[Bedford T]

Your lack of knowledge about how they are paid is striking. My suggestion will in fact stop them in their tracks every time. Follow the plan.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[Schmalts]

I emailed them about the gas cap. Here is the response i got.
"Hi sir,
Sorry about the problem.
Have you assmebled the cap well?
The cap could be moved if you don't install well, so hope you can double check."

My cap leaks out of where the screw driver slot is, not the tank gasket area.

 

[Schmalts]

I am using the air filter that came with the kit. I am a little surprised of the coarse foam insert. You guys eliminating that? Seems a little odd having the coarse foam after the paper pleats instead of the other way around. Is it for noise?

 

[ammoaddict]

Mine leaks around the flat gasket. You can see it bubbling out and running down the tank. I sent them a video and their response was" we see your tank is leaking not the cap, so which is it indeed?"
The cap I ordered on eBay has an Oring instead of a flat gasket and it does not leak.

I emailed them about the gas cap. Here is the response i got.
"Hi sir,
Sorry about the problem.
Have you assmebled the cap well?
The cap could be moved if you don't install well, so hope you can double check."

My cap leaks out of where the screw driver slot is, not the tank gasket area.

Sent from my Moto G (4) using Tapatalk

 

[ammoaddict]

Mine did not have a foam insert only the paper filter.

I am using the air filter that came with the kit. I am a little surprised of the coarse foam insert. You guys eliminating that? Seems a little odd having the coarse foam after the paper pleats instead of the other way around. Is it for noise?

Sent from my Moto G (4) using Tapatalk

 

[William Prophett]

I am using the air filter that came with the kit. I am a little surprised of the coarse foam insert. You guys eliminating that? Seems a little odd having the coarse foam after the paper pleats instead of the other way around. Is it for noise?

The foam insert is there to keep the filter from getting wet with fuel from blowback. There is a small amount of fuel air mix that blows back through the intake circuit during the stroke.

 

[William Prophett]

Mine did not have a foam insert only the paper filter.

Sent from my Moto G (4) using Tapatalk

The high flow filter system for these saws comes with a plastic baffle that the filter sits on top of. If you get this system, the baffle keeps the filter from getting soaked with fuel. If you are running a kit paper element, you really should have the foam insert or the filter is gonna het messy.

 

[Bedford T]

You open A PayPal and they withhold payment until they sort out the problem. They will pay attention Everytime

Have no idea how you handled it. I referred to my plan. Using the system.

I am so tired of your gas, I have had enough. You have no idea what I know. I have been working on saws for years - long before you showed up here and starting trying to tell everybody what to do and think.

Your "plan" is BS - as is obvious to anyone with any sense of reality. Stop them in their tracks every time huh? Sure doesn't seem to be working to me.

Goodbye to you and good riddance.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[67L36Driver]

I am using the air filter that came with the kit. I am a little surprised of the coarse foam insert. You guys eliminating that? Seems a little odd having the coarse foam after the paper pleats instead of the other way around. Is it for noise?

AFAIK, that foam catch’s spit back. Keeps it off the paper filter.

 

[Bedford T]

With and without

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[ammoaddict]

I told you wrong. Mine does have the black foam insert. I had forgotten about it.

Sent from my Moto G (4) using Tapatalk

 

[Schmalts]

AFAIK, that foam catch’s spit back. Keeps it off the paper filter.

Cool thanks, after a lot of assumptions that's what I came up with for the only excuse to have it.

 

[Bedford T]

i got a shock. knew they were coming. Walmart started.

the order shows a tv remote, the cost and the duty calls it a merchandise fee .246872% ouch. thats going hurt on parts and saws. i bet that sales tax is applied to the amount, raising it above .25%

 

[2412]

That looks like a lot more than a quarter of a percent.

 

[Bedford T]

25%

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[ab2]

It's 2% : of the tire cost.

Very likely the NC State environmental.

 

[Bedford T]

Lol, your wrong.

From Walmart

What is a merchandising fee?
The fee is based on the value of the merchandisebeing imported, not including duty, freight, and insurance charges. The maximum amount of the feeshall not exceed $485 and shall not be less than $25. ... MPF for informal entries is a set fee and ranges from $2.00, $6.00 or $9.00 per shipment.Nov 16, 2017

It's 2% : of the tire cost.

Very likely the NC State environmental.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy