Homelite Chainsaws

[watsonr]

Who got the Homelite 7-29 out of Florida?? NICE price too!!

 

[67L36Driver]

While we are on the subject of C-5's.

I need to come up with a starter cup #56441 in the next couple three weeks for one.

I looked at Chainsawr.

 

[Steve NW WI]

I need to come up with a starter cup #56441 in the next couple three weeks for one.

I looked at Chainsawr.

I have a cup off a C5, but it's stamped 14-369. Anyone know if this will interchange? It's chewed up, but was working when I took the saw apart.

I guess I should get some C series IPLs if anyone can point me to them, or email them to me. I think my email is viewable in my profile.

 

[67L36Driver]

I have a cup off a C5, but it's stamped 14-369. Anyone know if this will interchange? It's chewed up, but was working when I took the saw apart.

I guess I should get some C series IPLs if anyone can point me to them, or email them to me. I think my email is viewable in my profile.

Go to Model Profile: C-5 Click on the IPL link at the bottom of the stats. It will open with Acrobat reader. Acrobat toolbar will appear when your curser if hovering near the bottom of the page and save it.

 

[a. palmer jr.]

I need to come up with a starter cup #56441 in the next couple three weeks for one.

I looked at Chainsawr.

I got one. It has a worn groove where the pawls have been running on it..maybe it was made that way, don't know. PM me with your address and it's yours.

 

[a. palmer jr.]

Go to Model Profile: C-5 Click on the IPL link at the bottom of the stats. It will open with Acrobat reader. Acrobat toolbar will appear when your curser if hovering near the bottom of the page and save it.

The difference in some of the cups is at the back surface, some have 3 cutouts for your flywheel puller holes which are raised a bit. If the cup doesn't have the cutouts you can dremel them out. Also the front to back length of the cups varies a bit but can be overcome by shimming the starter outward with small washers.

 

[67L36Driver]

The difference in some of the cups is at the back surface, some have 3 cutouts for your flywheel puller holes which are raised a bit. If the cup doesn't have the cutouts you can dremel them out. Also the front to back length of the cups varies a bit but can be overcome by shimming the starter outward with small washers.

Good to know. Looks a lot like the old lawnmowers I repaired as a youth.

 

[a. palmer jr.]

I just looked at mine and it says 14-369 as well.

 

[a. palmer jr.]

Good to know. Looks a lot like the old lawnmowers I repaired as a youth.

I imagine you already know but I'll stress it again, don't ever oil these type starters or put grease on them. Those little fiber washers are labeled "clutches" so they won't stand any oil on them or they slip.

 

[67L36Driver]

I need to come up with a starter cup #56441 in the next couple three weeks for one.

I looked at Chainsawr.

A. Palmer has me covered. Thanks fellas.

I havn't messed with one of those 'slippy clutches' in forty plus years. They date back to the first recoil starters used on lawnmowers. Before them, you wound a length of mom's clothesline around the pulley with a chunk of broomstick for a handle.

 

[a. palmer jr.]

150 Parts saw?

Has anyone here got a Homelite 150 parts saw? I was working on a buddys 150 when I accidentally broke the clutch cover. I have a feeling it was already cracked but he said no. If anybody's got one to spare please PM me. Thanks.

 

[a. palmer jr.]

A. Palmer has me covered. Thanks fellas.

I havn't messed with one of those 'slippy clutches' in forty plus years. They date back to the first recoil starters used on lawnmowers. Before them, you wound a length of mom's clothesline around the pulley with a chunk of broomstick for a handle.

Got the cup boxed up...wife's gonna take it to Post Office tomorrow when she grocery shops..

 

[Sport Faller]

If anyone has a set of points and condenser and also the pot-metal bracket that holds them for a C-series saw please PM me

Thanks, Jake

 

[chainsawlady]

C-series ignition

If anyone has a set of points and condenser and also the pot-metal bracket that holds them for a C-series saw please PM me

Thanks, Jake

bigskyjake
I have several 55987 - condenser and 58165 - points for the C-series. I'm not certain what you mean by pot metal bracket. Need a part number.
chainsawlady

 

[Sport Faller]

bigskyjake
I have several 55987 - condenser and 58165 - points for the C-series. I'm not certain what you mean by pot metal bracket. Need a part number.
chainsawlady

This whole bracket that holds the points/coil/condenser pictured here that I broke the tab off of

 

[Sport Faller]

Was cleaning up my Super EZ A and found what may be the coolest sticker ever

 

[paccity]

for thoughs who havn't seen the other thread,View attachment 196441View attachment 196442View attachment 196443View attachment 196444View attachment 196445

 

[Steve NW WI]

This whole bracket that holds the points/coil/condenser pictured here that I broke the tab off of

Jake, I sent that assembly off my parts saw to ChainsawmanXX. I'm not sure what he needed off it, but it might be worth sending him a PM if it gets ya the housing at least. The last I heard, he was working out on the road, so it might be a while before you hear back.

 

[Eccentric]

Was cleaning up my Super EZ A and found what may be the coolest sticker ever

Nice. A couple of my Homelite XL12 and E-Z family saws have those stickers.

 

[Sport Faller]

Nice. A couple of my Homelite XL12 and E-Z family saws have those stickers.

cool, I really want a giant one for my truck