Husky 460/359/365

[berryman70]

Wayne
you already have a 55 & need more power, I don't think a stock 359 would be that big of an improvement for you. I cut with a friend that has a 365 and my 359 wasn't much slower, untill I tweaked the 359 and now it's way faster.
I think (if you can spend the money & want to go with husqvarna) go with the 372xp or get a 359 and have it worked on.
my 2 cents
Don

 

[bsjonny520sp]

 

[SawTroll]

And the winner is................Hmmmmmmmm!!!


Sacrificing a little weight for better filtration................:censored:

The filtration of the "low top" 372s are more than adequate, unless your conditions are extremely dirty/dusty......

 

[rahtreelimbs]

And the winner is................Hmmmmmmmm!!!


Sacrificing a little weight for better filtration................:censored:

The filtration of the "low top" 372s are more than adequate, unless your conditions are extremely dirty/dusty......

When 99% of the 372's over here comes this way...............well...............you get the picture!!!

 

[SawTroll]

bigger is better

...and not as easy to clean........:monkey: :hmm3grin2orange:

 

[bsjonny520sp]

does anyone know how the baileys pro dogs are for the 372 they have 4 point or 5 point ?

 

[bsjonny520sp]

When 99% of the 372's over here comes this way...............well...............you get the picture!!!

which way limb low top? i have never seen one does anyone have a pic of a low top 372?

 

[SawTroll]

When 99% of the 372's over here comes this way...............well...............you get the picture!!!

Basically none comes that way here - but wtf do I know.......:greenchainsaw: :hmm3grin2orange: :hmm3grin2orange:

...there were two small specs on my low 372 filter, after 3 tanks - knocked it against some wood, and they were gone......

 

[bsjonny520sp]

 

[asb151]

Not bad advice! :greenchainsaw:


...but when discussing 359 vs. 365, the "correct" answer is MS361......:hmm3grin2orange: :hmm3grin2orange:

I'll put my 365 up against those two saws in any size wood....any day of the week:biggrinbounce2:

 

[asb151]

Wayne
...I cut with a friend that has a 365 and my 359 wasn't much slower, untill I tweaked the 359 and now it's way faster...
my 2 cents
Don

I assume "tweaked" means muffler modded?

 

[rahtreelimbs]

but wtf do I know.......

Do you really what me to answer that..........???:monkey:

 

[SawTroll]

I'll put my 365 up against those two saws in any size wood....any day of the week:biggrinbounce2:

Forget the 359, but the 361 will probably hang with it, if it is a German made one.........

 

[SawTroll]

Do you really what me to answer that..........???:monkey:

Nope - I have a hunch! :hmm3grin2orange: :hmm3grin2orange:

 

[Urbicide]

does anyone know how the baileys pro dogs are for the 372 they have 4 point or 5 point ?

They have both. opcorn:

 

[bsjonny520sp]

are they much bigger and will it still sit flat with the 5 point?

 

[rahtreelimbs]

but wtf do I know.......

Do you really what me to answer that..........???:monkey:

Nope - I have a hunch! :hmm3grin2orange: :hmm3grin2orange:

I didn't think so...........ALTHOUGH.............it might be worth another 5 points..........................:jawdrop:

 

[berryman70]

I assume "tweaked" means muffler modded?

yes, muffler work, but there were more mods done to be able to outcut a 365...a 365 is a good saw, beefier then the 359
Don

 

[Mr.]

If it weren't for a certain someone modding a 359 it's potential would never had been realized. Still with the muffler modded and a price $100 or so lower that a 357.................it ain't rocket science!

Thanks I thought I would never get any credit for my 359 build.

Fred

 

[rahtreelimbs]

If it weren't for a certain someone modding a 359 it's potential would never had been realized. Still with the muffler modded and a price $100 or so lower that a 357.................it ain't rocket science!

Thanks I thought I would never get any credit for my 359 build.

Fred

Sorry Fred I meant someone else..............that's OK though you can join the ranks!!!:greenchainsaw: