Greenmachine
ArboristSite Operative
Another vote for the 200t or whatever that little "one hander" is called. Yes i know you should use two hands.
Huztl FarmerTec What Saw Build Kit Would You Like to See Them Make?
Help Support Arborist Forum:
BrokenSVT
Where did all these saws come from?!?
My little Fiesta ST running 22 pounds of boost(soon to be 25), with flat foot shifting and two stage rev limiter, resembles that remark. Maybe she's not a 10 second Street car, but she gives cars with way more guts quite a challenge frequently, and running a 1.6L engine.
I digress. Carry on.
Just thought I'd mention that Huztl does have the 070 saw already assembled for around 379 with free shipping. That would probably be as cheap as buying the kit and paying postage of around $100 or so.
TimTaylor
ArboristSite Operative
I think with 22lbs boost you probably do have a little bit more power. [emoji41] and fun is the point? Hey......turbo chainsaw.........mmmmmmm.My little Fiesta ST running 22 pounds of boost(soon to be 25), with flat foot shifting and two stage rev limiter, resembles that remark. Maybe she's not a 10 second Street car, but she gives cars with way more guts quite a challenge frequently, and running a 1.6L engine.
I digress. Carry on.
Sent from my HUAWEI VNS-L22 using Tapatalk
KiwiBro
Mill 'em, nails be damned.
New, parallel imported.
Stock turbo? Or you already upgraded. Im running a 2.0l and the TD-04 turbo was running 22lbs and that was at its max as far as efficiency goes. I ended up with a 20g and it pulls hard.
I'm hunting a factory twin scroll for my ej207 set up.
I'm hunting a factory twin scroll for my ej207 set up.
BrokenSVT
Where did all these saws come from?!?
Still running the K03. Last spring I was going to pick up one of the cool hybrid turbos from across the pond, but chose engagement ring instead. I'll still get the turbo...one of these days.
Don't get me wrong, the stock turbo is rather inefficient at stock boost levels. It runs out of wind around 5500 rpms. It's hella fun on the way there though. Instantaneous boost is the recipe. Lighting the tires on third(sometimes fourth) gear pulls can get some funny looks.
traffic903
ArboristSite Lurker
Details KiwiBro??
041 Farmboss, would be a heavy for most, neoprene ice fishing gloves help.
KiwiBro
Mill 'em, nails be damned.
Last time I asked was about 6 months ago so I'm sure details have changed. But if I recall correctly, they were about $1700, which is less than I paid for my 395. But a 3120 is too much saw for me anyway, so I didn't take it any further.
traffic903
ArboristSite Lurker
Gotcha cheers.
Stationary Smell
ArboristSite Lurker
So I'd the winch going to happen? Just curious. It'd be nice to have a more affordable option.
Sent from my SM-G930P using Tapatalk
Sent from my SM-G930P using Tapatalk
KiwiBro
Mill 'em, nails be damned.
Agreed.
Are you aware of Powerhouse?
https://www.amazon.com/Powerhouse-Log-Splitters-Xm-100-Chainsaw/dp/B01DF9883I
They didn't return my emails.
Stationary Smell
ArboristSite Lurker
I haven't seen them before. I'll have to look into them
Sent from my SM-G930P using Tapatalk
I think that Huztl wouldn't do to bad to offer a 041 Super conversion kit. Jug, studs, nuts, piston. That one shouldn't be too tough to do. There are a lot of 041's out there, and a lot of people who want to turn them into Supers.
Probablywillforget
ArboristSite Lurker
When are they going to do a chainsaw winch?
brandonstc6
Addicted to ArboristSite
Wonder if they are getting any closer to a ms200t kit?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
From what I've been reading on other threads about the Huztl kits I kinda wish they wouldn't make any more kits unless they want to include all the parts and quit using sub standard parts. I know that business is good and parts supplies might sometimes be low but they shouldn't cut quality to make production...
