I saw it on Ebay/Craigslist

[rarefish383]

I've seen that before and wondered if that shows an automatic bid. Maybe some one will clarify that for us, Joe.

 

[67 Mustang]

I've seen that before and wondered if that shows an automatic bid. Maybe some one will clarify that for us, Joe.

I've always thought that is was the current bidder, who has a higher max bid, getting bumped up as someone else raised the ante. Doesn't show the bidder who placed that bid that causes the raise because technically they never had the high bid. Hope that's clear as mud.

 

[huskydude]

old school stihl

bet the stihl guys would cream over this.

http://nh.craigslist.org/for/2080729617.html

 

[Saw Dr.]

2 people bidding on his 2100CD and both have 0 feedback.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180592056105

I wonder if I can make money selling scored saws on ebay. Just remove the recoil and say that I can't check compression or spark. Once the saw sells, sell the recoil in a different auction..... Then I can shill the thing up on a fake account. No wonder that place has degraded. I'm going to ask him for a pic of the piston. I bet he doesn't do it.

 

[Wildman1024]

I wonder if I can make money selling scored saws on ebay. Just remove the recoil and say that I can't check compression or spark. Once the saw sells, sell the recoil in a different auction..... Then I can shill the thing up on a fake account. No wonder that place has degraded. I'm going to ask him for a pic of the piston. I bet he doesn't do it.

Yea i was watching that saw in my watch list and well...not anymore. I bet you wont get any pics either

 

[Rudedog]

I wonder if I can make money selling scored saws on ebay. Just remove the recoil and say that I can't check compression or spark. Once the saw sells, sell the recoil in a different auction..... Then I can shill the thing up on a fake account. No wonder that place has degraded. I'm going to ask him for a pic of the piston. I bet he doesn't do it.

Couldn't he just turn it with a air ratchet?

 

[SawGarage]

Couldn't he just turn it with a air ratchet?

to test spark, sure.....I use a ordless drill.

but you DO NOT need a damn thing but your finger to see if it has reasonable compression... that saw with a GOOD top end is almost impossible to turn with a finger..

 

[newmexico]

no idea what this one is

http://albuquerque.craigslist.org/tls/2077736137.html

my feeling is that it's nothing special, but I wonder how it compares in the power to weight ratio of the modern top handle saws

 

[Eccentric]

There still climbing. BUY IT NOW $195.00. I guess I should have bought two at his original price. Ron

http://cgi.ebay.com/McCulloch-36-Guide-Bar-/110616797213?pt=US_Chainsaws&hash=item19c146601d

That guy is a real piece of work. Since you bought your bar, he's listed and sold the same type of Mac bar (must have a stack) about 1/2 dozen more times, increasing the price every time. The bar before this last one (which just sold for $195) was at least $10-20 cheaper than this one, and he had "this is my last one" or something similar in the description. He's also listed more of the Homelite bars, upping the price each time. I also wish I'd have bought one of each of the Mac and Homelite bars at their original prices...

In one of the earlier listings of the Homelite bar, he had a closeup pic of the McCulloch bar part number (think it was from your bar listing). Other than removing that pic, he's reused the Homelite listing verbatum (same as the Mac listing). It's a free country (for a while longer anyways) and he's free to charge what he wants for whatever he sells (and that's how it should be)...................However he does come off as being shady...

 

[roalco]

I wonder if I can make money selling scored saws on ebay. Just remove the recoil and say that I can't check compression or spark. Once the saw sells, sell the recoil in a different auction..... Then I can shill the thing up on a fake account. No wonder that place has degraded. I'm going to ask him for a pic of the piston. I bet he doesn't do it.

Don't know about that particular saw of his but I just bought a bunch of 2100cd parts from him and they were better than described, a smoking deal moneywise, and they arrived at my door the next day.
IMHO he seems to be a straight shooter and I'd buy from him again.
A non-running saw is always a pig-in-a-poke... ya takes your chances!

 

[TALLGUY]

New Stihl 990 Chainsaw

http://omaha.craigslist.org/wan/2081148265.html

ok so who is the wise guy just waiting to see if this makes in to AS? I have got to try out one of these stihl diesel saws

anyone had luck with the solar powered ones?

 

[StephieDoll]

This guy has been listing this saw ever since I put out a wanted posting. At that time, he told me it was a 965, listed as a 465 and now A65. I should check it out just to see what it really is.

olympic chain saw - $125 (Fremont, NE)

--------------------------------------------------------------------------------
Date: 2010-11-27, 9:13PM CST
Reply to: [email protected] [Errors when replying to ads?]

--------------------------------------------------------------------------------


A65 Olympic chain saw.
Runs, no bar or chain

4026205541


•Location: Fremont, NE
•it's NOT ok to contact this poster with services or other commercial interests



PostingID: 2082893962


As far as the Stihl 990 solar saw, that was my firewood buddy's doing. He does not belong to the site or even come here. He just did it to see what kind of response he gets.
You guys should all send him info on them. He's a good guy, just funny at times.

 

[MnSam]

stihl 041 super

Stihl 041 Super Chainsaw - $100 (River Falls WI)
Date: 2010-11-27, 7:29PM CST
Reply to: [email protected] [Errors when replying to ads?]

041 stihl super av electronic 18in bar runs good needs chain call 715-760-1047

http://minneapolis.craigslist.org/wsh/grd/2082787977.html

sold

 

[elwoodps]

Jonsered 90 parts saw. Make Offer (Spring Grove, Pa)

This showed up on the York, Pa. Craigslist last night.

Jonsered Chainsaw (Spring Grove)

Date: 2010-11-27, 7:19PM EST
Reply to: [email protected] [Errors when replying to ads?]

Jonsered chainsaw for sale. Approx. 1970. Model 90. Good for parts. Runs. Make offer.

* Location: Spring Grove
* it's NOT ok to contact this poster with services or other commercial interests



PostingID: 2082697576

http://york.craigslist.org/tls/2082697576.html

Spring Grove is SW of York.

 

[Saw Dr.]

Here is a real gem. Concrete saw run without an air filter. I think he needs to move the decimal point to the left one or two spaces.

Stihl TS-760 Demolition Saw, Chop Saw, Water fed Accessory - $800 (metro ATLANTA area)

--------------------------------------------------------------------------------
Date: 2010-11-27, 1:55PM EST
Reply to: [email protected] [Errors when replying to ads?]

--------------------------------------------------------------------------------


like new barely used, purchased for 1400, bought the saw for hire but my jobs ran out. Catch a great saw for a good price.

Thanks, please call 404-861-0499










demo stihl saw mitre jig reciprocating new, used 340 5.0 4.6 truck car job work help

Location: metro ATLANTA area
it's NOT ok to contact this poster with services or other commercial interests



PostingID: 2082137743

 

[SomeotherGuy]

http://omaha.craigslist.org/wan/2081148265.html

ok so who is the wise guy just waiting to see if this makes in to AS? I have got to try out one of these stihl diesel saws

anyone had luck with the solar powered ones?

Heck! I have the hybrid solar diesel with the 137 inch bar! Come over and try it out!

 

[dellwas]

1949 chainsaw for sale on Halifax Kijiji

This is on Kijiji, sorta like Craigslist. Anyways, thought some of you might be interested.

http://halifax.kijiji.ca/c-buy-and-s...dIdZ241545216#

 

[Mr. M]

I wish I had the money for this :0

http://minneapolis.craigslist.org/ram/atq/2079242026.html

Huge McCulloch Chainsaws Sign VINTAGE - $150 (Austin Mn)

--------------------------------------------------------------------------------
Date: 2010-11-25, 1:17PM CST
Reply to: see below

--------------------------------------------------------------------------------


Heres a nice old sign,Over 6 feet Long,CALL Kevin 507-440-0160,,CASH ONLY


•Location: Austin Mn

 

[valekbrothers]

http://minneapolis.craigslist.org/ram/atq/2079242026.html

Huge McCulloch Chainsaws Sign VINTAGE - $150 (Austin Mn)

--------------------------------------------------------------------------------
Date: 2010-11-25, 1:17PM CST
Reply to: see below

--------------------------------------------------------------------------------


Heres a nice old sign,Over 6 feet Long,CALL Kevin 507-440-0160,,CASH ONLY


•Location: Austin Mn

I am only a couple minutes away if anyone needs any help with this one.....

 

[wendell]

Haven't seen Mark around lately but that sure would be nice in the museum. I'll send him a PM.