I saw it on Ebay/Craigslist

[DSS]

Woo hoo!

The cow is here!

Fire up the grill!










Good to see ya, Chris! Been on vacation?

No such luck Teddy, just vacation from here. Busy busy.

 

[Warped5]

No such luck Teddy, just vacation from here. Busy busy.

... After getting cut loose by a previous employer, I was 'un-busy' for about 15 months .... not fun.

Busy is good and I hope you're happy and doing well!

 

[watsonr]

opcorn:opcorn:opcorn:

This is better than the National Convention!!

 

[Gologit]

This week im going to louisiana to volunteer my time and energy for storm cleanup, then im going to fix a members clutch cover here for free, then im going do yardwork for an elderly neighbor and then ill start my new public seevice job.

New public service job? Are you going back into law enforcement?

 

[Warped5]

New public service job? Are you going back into law enforcement?

... or picking up trash by the side of the highway.

Wonder if he got that 125 yet?

 

[thomas1]

This is an epicly worthless troll post, you know that right? Everybody on here has given me a hard time since im the new guy but they have been helpful and informative too.

Absolutely nothing you that you have pecked out about me on your keyboard has had any substance or value. Its ALL been negative and condescending.

This week im going to louisiana to volunteer my time and energy for storm cleanup, then im going to fix a members clutch cover here for free, then im going do yardwork for an elderly neighbor and then ill start my new public seevice job.

I may not have 1/10th of the saw wisdom that you have, in fact, since you have been so studiously stalking my every post, i DID kill a mini mac cylinder knowing that new ones cost about $10 and i have another one on the way.... But you know what?

I could kill 10 mini macs and probably still be more useful and positive to the world.

Nobody likes a manchild internet bully and you're not winning cyber cool points here.

Im not sure if youve noticed, but every time i called you out on your predatory schoolyard antics, you're friends have only been able to defend you by saying "thats just thomas, hes kind of retarded, different, an A-hole until you beg his friendship and he accepts, ect"

Not even your friends here can adequately excuse your actions.

On the streets this usually goes: ask, tell, force, jail.

I dont have those options here and i know it so i will just present the situation like so;

Please, pretty please, stop internet bullying me.... You can if you want, but youre not really hurting my feelings much and only make yourself look like a fool.

1. I don't recall speaking to you.

2. I replied to someone that said you couldn't blame a machine for operator error. I stated that you could and had. See below.

The spark plug threads were stripped so i went to autozone for one of those helicoil spark plug repair kits. The tap has to go into the cyliner about 2 inches and the spark plug hole is canted to the side, towards the cylinder wall.

I had to screw the tap all the way in to the cylinder and the tip of the tap teeth contacted the cylinder wall and screwed it up. Also, the darn tap didnt go in perfectly straight anyway. When i went to screw in the new threaded sleeve, the hole was too big for it to fit right.

I returned the kit, however im certain that it would have worked on another, larger saw with the cylinder's spark plug hole in a different position.

Anyhow.... Now i need to find a new cylinder for this bad boy. Im looking at some on ebay that are cheap, going for 25-40 bucks, but Im a little concerned about getting one that doesnt have good compression, has a scored cylinder, ect...

3.

 

[huskyman1]

What would you guys pay for this?

View attachment 250512

 

[Warped5]

What would you guys pay for this?

View attachment 250512

.. about $.10 USD .... It's a very tiny picture.

 

[huskyman1]

.. about $.10 USD .... It's a very tiny picture.

Wow i am cracking up that is pretty funny. I am working on that pic....

 

[a. palmer jr.]

What would you guys pay for this?

View attachment 250512

I'd have to get a closer look...

 

[struggle]

What would you guys pay for this?

View attachment 250512

Drum roll and the tinest picture award goes toooooooooooooooooooo...................:hmm3grin2orange:

 

[huskyman1]

Drum roll and the tinest picture award goes toooooooooooooooooooo...................:hmm3grin2orange:

Man you guys are funny.....

 

[hkusp9]

... or picking up trash by the side of the highway.

Wonder if he got that 125 yet?

cons pick up trash on the side of the highway, im going to get to ride on the back of a garbage truck!

Also, assuming that i dont get scammed in any odd or exciting way, as i said earlier, im expecting my saws around the 1st-4th of the month.

 

[jc3116]

Sally Saw very rare saw lauson antique | eBay

 

[hkusp9]

Sally Saw very rare saw lauson antique | eBay

thats a really really cool saw with less than an hour left on the clock!

 

[RedneckChainsawRepair]

Sally Saw very rare saw lauson antique | eBay

thats a really really cool saw with less than an hour left on the clock!

I think Brad brought a sally saw to the gtg once.

 

[hkusp9]

really clean looking jonsered with a shiny new bar

Jonsered 2050 Turbo Chainsaw, Like New!

 

[hkusp9]

homelite 750 running (i think) for 325

Many chainsaws for sale

 

[hkusp9]

SUPER clean looking 750 for $350!
Somebody buy this and put up pics for me :msp_biggrin:

Homelite 750 chainsaw

 

[Jon1212]

really clean looking jonsered with a shiny new bar

Jonsered 2050 Turbo Chainsaw, Like New!

homelite 750 running (i think) for 325

Many chainsaws for sale

SUPER clean looking 750 for $350!
Somebody buy this and put up pics for me :msp_biggrin:

Homelite 750 chainsaw

Tom should be along shortly to inquire as to your "finder's" fee.