Iowa Spring GTG II

[struggle]

A 9010... as in a Makita 9010... I have a lead on one that is going cheap if I do some repairs on it. I love my 6401 so wondering how the 9010 stacks up...??? if you are talking about a 9010 dolmar/makita care if a stranger gives her a drive??? I need to decide on wheather to purchase the one i found or not...

Not a problem. I will have it there. It has not even been gassed so it will be far from being able to run like one with several tanks through it. I have a 28" and new full chisel for it as well. I get first run though:hmm3grin2orange:

It is dressed in Dolmar

 

[nstueve]

Not a problem. I will have it there. It has not even been gassed so it will be far from being able to run like one with several tanks through it. I have a 28" and new full chisel for it as well. I get first run though:hmm3grin2orange:

It is dressed in Dolmar

Sweet... The lady I'm looking at needs some serious attention and is dressed in pretty makita blue. Can't wait to see her go. I might tote along my 6401 if I get my 84cc BB kit on...

 

[Bill G]

................ Anyone able to make a loop of chisel .404 that is coming?

A link count would help.??????

 

[Homelite410]

I will have breaker and spinner if anyone brings the chain!!

 

[SawTroll]

Most logs are up and I think the wood is ready.

Ron

View attachment 235250View attachment 235251View attachment 235252

That should do the trick. here ya go

Looks like a serious clean-up job will follow the GTG.......

 

[struggle]

A link count would help.??????

I will get one later today, chain is on saw right now

82 drive links, nickle doesn't fit but a quater does for gauge, chain that is on it now is oergon and is stamped 59 on drive links, does this mean .063"?

 

[struggle]

bump back up the line:msp_biggrin:

Anyone coming to the GTG that has any need for a Wisconsin VH4D engine with a burnt exhaust valve please PM me for further details. This is not to give away but for a reasonble offer or trade I am willing to get rid of it.

 

[Bill G]

I will get one later today, chain is on saw right now

82 drive links, nickle doesn't fit but a quater does for gauge, chain that is on it now is oergon and is stamped 59 on drive links, does this mean .063"?

So you need a .404, 063, 68Dl chain.

If you send me your address I can have it to you Thursday.

Bill

 

[struggle]

So you need a .404, 063, 68Dl chain.

If you send me your address I can have it to you Thursday.

Bill

PM sent it is 82 DL for a 28" homilite bar.

 

[mweba]

Swap trailer?

 

[Steve NW WI]

Swap trailer?

Mitch, I don't know if you saw this post, so I'll shamelessly repost it here as a reminder to everyone that's coming:

I think (didn't check back on the thread) there's a swap meet table going on? I'm gonna be a little limited on space coming down, so I'm gonna list what I have that might interest some of ya. If anyone has interest in one of them, let me know, and I'll drag it along, otherwise they'll stay in the shed.

McCullochs:

Super 44 - worked on this some, still needs carb work. I haven't ruled out making this one a runner before the GTG. Compression and spark are good, cosmetically decent.

The rest of the saws on the list are as they were when I got them, unless stated otherwise, they have at least some compression, are complete or mostly so, and in "found in barn" condition - dirty, but may or may not clean up well.

Super 55 - spoken for, going to Dike, IA (whoodathunkit?)
1-51

Either the 55 or the 1-51 has a banged up wrap handle, I'd have to go to the shed and check to see which it is for sure.

Homelites:

C-52
C-7
C-91 locked up - likely seized, but haven't ruled out something simpler.

Gawd only knows what I might be interested in for trades...

If you want more sordid details and pics of any of these, let me know. They've been in project/someday status for a long time, and if they'll make somebody a well loved new saw, that's fine by me, I have plenty of things on my to do list.

 

[HEAVY FUEL]

SteveNw, I got a 3XL Carharrt jacket to send down for the swap trailer. It says wendell on the inside but I'm sure somebody could use it anyways!

Just ignore the smell of Carmel rolls & Scotch.

 

[Homelite410]

Swap trailer?

I think a 24 foot swap trailer is in order!!

 

[mweba]

Think I'm bringing the Isuzu....not sure yet:msp_biggrin:

 

[Steve NW WI]

SteveNw, I got a 3XL Carharrt jacket to send down for the swap trailer. It says wendell on the inside but I'm sure somebody could use it anyways!

Just ignore the smell of Carmel rolls & Scotch.

Jon, if ya get it down to JD's shop, I'll pick it up Friday morning before I head out.

What ya lookin to get out of it? 166 maybe? oke:

 

[Homelite410]

Swap trailer

I have a friend that is selling the following saws who is not a member but will be at the Iowa Spring GTG II!!
All of these saws run and can be picked up there.

Poulan Pro 365
Skil 1612
Alpina 31015
Dayton blade saw?
Lombard Comango (Factory high performance air cleaner)
Jonsereds SP52
Jonsereds SP49
McCulloch PM 610
Montgomery Wards TMC24056B (same as a mighty mite)
Homelite XL-12
McCulloch 250
Allis Chalmers 295
Sears (no model looks like an allis chalmers 295)
Strunk
Craftsman 351.23001 (with scratcher chain)
Craftsman 1638 with case
Homelite super 2 (3 each)
Redmax G300TS
WIZ (made by Root)
Partner S50
Bobcat

Listed below as NON RUNNING

Wright recip saws (3 each)
Remington PRO 88
Mor Wood
Lancaster 558

 

[Steve NW WI]

Jon, meant to say Boyds shop in my last post. Can't seem to get the edit button to work on my phone.

 

[WetGunPowder]

Steve-I'll have goodies for you on Friday AM at the shop!

 

[HEAVY FUEL]

Jon, meant to say Boyds shop in my last post. Can't seem to get the edit button to work on my phone.

That's ok, the way I hear it's actually Chris's shop anyway!:msp_w00t:

 

[mweba]

This highly tuned Mac example will be on the trailer as well.