Date is April 27 and address is found on post #506. We would love you to "check it out". We had a good turn out last year at this location and looking for another.
BETTER START ROUNDING UP SOME WOOD TO CUT!!!!!!!
Ron
Iowa Spring GTG II
- Thread starter Homelite410
- Start date
Help Support Arborist Forum:
Date is April 27 and address is found on post #506. We would love you to "check it out". We had a good turn out last year at this location and looking for another.
BETTER START ROUNDING UP SOME WOOD TO CUT!!!!!!!
Ron
hoskvarna
Addicted to ArboristSite
you bet,anyone can come! the addy is back a few pages but here it is ,3507 v ave,chelsea. bring some saws and some BS and youll fit rite in.:msp_w00t:
A.E. Metal Werx
Addicted to ArboristSite
Date is April 27 and address is found on post #506. We would love you to "check it out". We had a good turn out last year at this location and looking for another.
BETTER START ROUNDING UP SOME WOOD TO CUT!!!!!!!
Ron
We'll get there Ron. I'm sure Mike, Shaun, and I can make a pretty good dent in it in a day or two. If You and mark could go out and flag what you want, we could take care of it from there. With the amount of hours you guys are working you have other things to worry about and take care of.
Last edited:
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Im hoping to head out and drop king cherry that Alex and I found the other day and grab me a cord towards next years wood. I have one cord in the shed and need 7 more!!
KiwiBro
Mill 'em, nails be damned.
Any good buggers in or near Tipton who can help please?
Hopefully, you guys don't think I'm being too cheeky, but I'm starting to get quite panicky about all this and hoping for a little help.
Long story short: I've been hung out to dry by a business in Iowa and whilst they have offered a full refund, I'm not confident it'll either happen or do so without problems.
Would anyone be willing to collect it from them please? I'm scrambling for an alternative supplier and if I don't find one, I'll give you my account details to wire the $ back to me, but until I decide I can't find anyone to supply in USA, I don't really want this $ to move back out as I get hit currency conversion charges and on top of all the costs I'm incurring associated with this fiasco, it's just one more cost I'd like to avoid in the meantime. I promise there'll be beer $ in it for the helpful person who comes to my rescue on this.
I really don't like asking people for favours unless I feel I've no other choice and have exhausted all means of self-help. This is one of those times. Could you please PM me if you can help? Thank you.
Hopefully, you guys don't think I'm being too cheeky, but I'm starting to get quite panicky about all this and hoping for a little help.
Long story short: I've been hung out to dry by a business in Iowa and whilst they have offered a full refund, I'm not confident it'll either happen or do so without problems.
Would anyone be willing to collect it from them please? I'm scrambling for an alternative supplier and if I don't find one, I'll give you my account details to wire the $ back to me, but until I decide I can't find anyone to supply in USA, I don't really want this $ to move back out as I get hit currency conversion charges and on top of all the costs I'm incurring associated with this fiasco, it's just one more cost I'd like to avoid in the meantime. I promise there'll be beer $ in it for the helpful person who comes to my rescue on this.
I really don't like asking people for favours unless I feel I've no other choice and have exhausted all means of self-help. This is one of those times. Could you please PM me if you can help? Thank you.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
I am happy to inform all of you that our first donation has rolled in... Jonsered Racket has donated enought pork shoulder to feed about 50 people and I have a smoker lined up to cook it up. Many thanks to Adam!!
Some of us survive on river trunks that get pulled from build up on bridge pylons... Sometimes you can't help the dirt or the use of semi chisel...
If you can replace the word "to" in a sentence with the word "also," you probably need to use "too" instead of "to"... make sense?
LOL... good example...Wetgunpowder's coming down too? (Correct usage of "too" for Mitch.:msp_tongue
:big_smile:
now if we corrected Mitch's grammar....
jonsered raket
ArboristSite Guru
Im very excited for this GTG, All I have heard is good things. Cant wait for the event and let me know if there is anything else I can do. Ill probably drive a U-Haul with the amount of saws I want to bring. Hopefully Ill be Debuting the Jonsered 940:msp_sneaky:
. Hopefully Ill be Debuting the Jonsered 940:msp_sneaky:
Steve NW WI
Unwanted Riff Raff.
Hey Boyd, was that a NOS 535 Jonsy I saw at the shop on Saturday when I stopped to harass Todd? Didn't see much work if it wasn't.
Anyone bringing a 2 man saw??????????
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
You perhaps?
M
moody
Guest
Ray I believe has intentions to bring a Flogging yellow goose 99 we resurrected at Mark's place last fall.
jonsered raket
ArboristSite Guru
I have a old strunk custom pro i could use some help with. Saw looks amazing for 1956!!
Sent from my VM670 using Tapatalk 2
Sent from my VM670 using Tapatalk 2
There was a fella I know that didn't make the Fall GTG and he's got 4-6 running 2 man saws. He works concrete so there's no telling if he's ever going to show at a GTG or not. He's not on AS either...
Maybe instead of a build off we need to have 2man saw races! He's got a 1947 Diston KB7-AY and a Mac 940 as i recall...
KB7
Model Profile: KB7-AY (12HP)
940
Model Profile: 940
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
For those still wanting to do a buildoff saw what do you say we have and Old-School port build off as in no machine work allowed. Port at will work transfers and such but no pop ups, no cut squish, and no cut bases! Let me know what yall think!
Hedgerow
HACK
I like old school...
hmmm, sounds good and levels the playing field for the novices... Only question is who will be the first to cheat? LOL!
ms250, echo 330t, or ???? Just trying to think of something that everyone can find and lay their hands on easy enough... Or anything 40cc and under or just make a sized group or two???
Last edited:
mitch95100
Saw Nut
Can someone bring a Dolly 166?
Sent from my USCCADR3305 using Tapatalk 2
Sent from my USCCADR3305 using Tapatalk 2
