Mastermind worksaw's picture thread

[battlefordguy]

Well don't have any good close ups at the moment.
But the compression should indicate it has been mooberized.
Put a decomp release on it to assist in preventing any further cracking on the gas tank.
Saw travelled a hell of a long way- purchased in California (eBay) only to discover p/c were fried. Spent approx 600.0 on oem parts, then shipped to Tennessee, then back to Saskatchewan.
The monkey pulled out all the stops to refurbish and even donated 1/2 case to the cause!!!
Kind of a rat rod[emoji5]️

Oh, it's a 260, probably could bought 2 new 261's for what it cost in the end. But I was committed, to the saw that is[emoji15]




Sent from my iPhone using Tapatalk

Found a close up- I'm sure Randy smiled when he opened the box[emoji6]

 

[Deets066]

That's about the highest compression I've seen, bet she's a runner

 

[battlefordguy]

That's about the highest compression I've seen, bet she's a runner

It's definitely has some torque. Least we have lots of 93 octane non ethanol up here[emoji2]
Never got a sticker either, so it surely looks like a rat rod.
Any observers just say it sounds really angry!!!

 

[pantelis]

Well don't have any good close ups at the moment.
But the compression should indicate it has been mooberized.
Put a decomp release on it to assist in preventing any further cracking on the gas tank.
Saw travelled a hell of a long way- purchased in California (eBay) only to discover p/c were fried. Spent approx 600.0 on oem parts, then shipped to Tennessee, then back to Saskatchewan.
The monkey pulled out all the stops to refurbish and even donated 1/2 case to the cause!!!
Kind of a rat rod[emoji5]️

Oh, it's a 260, probably could bought 2 new 261's for what it cost in the end. But I was committed, to the saw that is[emoji15]




Sent from my iPhone using Tapatalk

Time will tell........................... time will tell

 

[battlefordguy]

Time will tell........................... time will tell

Been running for close to two years now, just replaced the needle bearing in the sprocket- like 18 bucks, dam dealer pricing.
Gas and oil is all its needed. Goes through the gas fairly quick though...
Living in north sask in a huge house with OWB, try to process approx 40 cord a year. 15 cord in the pic, late start this year.

 

[pantelis]

Been running for close to two years now, just replaced the needle bearing in the sprocket- like 18 bucks, dam dealer pricing.
Gas and oil is all its needed. Goes through the gas fairly quick though...
Living in north sask in a huge house with OWB, try to process approx 40 cord a year. 15 cord in the pic, late start this year.

ok dont be ungry . i dont say nothing bad,

 

[battlefordguy]

ok dont be ungry . i dont say nothing bad,

Lol only one angry is the saw[emoji3]


Sent from my iPhone using Tapatalk

 

[pantelis]

Lol only one angry is the saw[emoji3]


Sent from my iPhone using Tapatalk

yes i hope to have it like this for many years, but if i was in your position i buy the 261mtronic and then ........................mastertronic worksaw
my opinion and after many times for "walking " to stihl in waibligen i tell you that the mastermind do the most pro work

 

[hseII]

Well don't have any good close ups at the moment.
But the compression should indicate it has been mooberized.
Put a decomp release on it to assist in preventing any further cracking on the gas tank.
Saw travelled a hell of a long way- purchased in California (eBay) only to discover p/c were fried. Spent approx 600.0 on oem parts, then shipped to Tennessee, then back to Saskatchewan.
The monkey pulled out all the stops to refurbish and even donated 1/2 case to the cause!!!
Kind of a rat rod[emoji5]️

Oh, it's a 260, probably could bought 2 new 261's for what it cost in the end. But I was committed, to the saw that is[emoji15]




Sent from my iPhone using Tapatalk

Found a close up- I'm sure Randy smiled when he opened the box[emoji6]

Moobs-" Easy Saws, we don't need no stinking Easy Saws"

And I thought mine was a beast:

MMMS261nonCM

 

[Mastermind]

Two years.......no sticker.

Shame on me.

Send me your address good sir.

 

[Deets066]

Here's the 064 masterminded, just recently new top cover, filter base, filter cover, tank/ handle, sprocket cover. She will be runnin shortly when I get time to pick up some parts from big T

 

[PA Dan]

Big t has parts?

 

[big t double]

Never in stock. That stupid elbow is still back ordered deets. If you want I'll take it off mine for the time being.

 

[Mastermind]

That Ted is a good egg.

 

[big t double]

Big t has parts?

And like a moron I forgot to ship that 044 switch housing for ya today...I'll get it out tomorrow

That Ted is a good egg.

Awww shucks

 

[psuiewalsh]

Somebody need this?

 

[glock37]

I'm a hoarder !

 

[big t double]

Somebody need this?View attachment 375311

Deets does...I owe him one. If he wants to give you his shipping info you could drop one in the mail to him and I'll mail one back to you with a stamp.

 

[Deets066]

No don't take it off yours, I didn't think the old would work, but it does snap in. It should work for now but I would still like the correct fuel hose when it comes in. The only thing keepin me from running is that contact spring.

 

[Deets066]

Somebody need this?View attachment 375311