McCulloch Chain Saws

[Karstin Boles]

Hey heimannm, is that a mcculloch roller nose bar? Looks a lot like one I have.

 

[Beetlejuice]

I love my PM-55. Second pull and we are up and running. But I'm an equal opportunity saw breaker.. Limbing with Stihl 175, top of tree down to about foot and half is the MAC, And from there the Homey 1050.. If that don't get it done, I leave it alone.

 

[Karstin Boles]

 

[Beetlejuice]

View attachment 629692

That a 55?

 

[Karstin Boles]

It's a 1-70 with Mcculloch roller nose bar.

 

[Beetlejuice]

It's a 1-70 with Mcculloch roller nose bar.

That's great shape.. I have a 1-70 also, and a 55.. Wouldn't happen to have a chain adjuster would ya?

 

[Beetlejuice]

 

[heimannm]

With the black AF cover and no gear drive, more likely a 1-70. The 55 has the same type stamped sheet metal AF cover as the 44, all others had a cast AF cover.



I think this is my 1-81 that I got from Joey Taylor, I also have a beautiful 1-80 that I don't seem to have any photos of. I don't even remember where it came from...



Gotta love the old gear drive saws too.

Mark

 

[heimannm]

 

[Beetlejuice]

With the black AF cover and no gear drive, more likely a 1-70. The 55 has the same type stamped sheet metal AF cover as the 44, all others had a cast AF cover.

View attachment 629701

I think this is my 1-81 that I got from Joey Taylor, I also have a beautiful 1-80 that I don't seem to have any photos of. I don't even remember where it came from...

View attachment 629697

Gotta love the old gear drive saws too.

Mark

The pic is 1-70. Cuz it's stamped on the bottom.. I am probably all screwed up.. Maybe my other one is a 44?

 

[Tomcurtis]

Love em all! That big roller nose bar is cool too.
Believe.it or not it has never been mounted on a saw. Hung on a nail in a friend of mines shop for 30 years. 54 inch

Sent from my iPhone using Tapatalk

 

[Tomcurtis]

With the black AF cover and no gearitdrive, more likely a 1-70. The 55 has the same type stamped sheet metal AF cover as the 44, all others had a cast AF cover.

View attachment 629701

I think this is my 1-81 that I got from Joey Taylor, I also have a beautiful 1-80 that I don't seem to have any photos of. I don't even remember where it came from...

View attachment 629697

Gotta love the old gear drive saws too.

Mark

Always wanted a mac gear drive. Came close to a 895 once but talked myself outa I

 

[heimannm]

My 55 is an absolute screamer, love the beavertail bar as well.



Mark

 

[emf123]

Some of my dads old saws. In the condition they came out frome under bench. All fire with a prime but all need tlc

Cool stuff! I've never seen a 125 with a cut-off attachment on it. Does that run? It seems like old cut-off saws had a short life span.

 

[Tomcurtis]

Cool stuff! Ive never seen a 125 with a cut-off attachment on it. Does that run? It seems like old cut-off saws had a short life span.

Runs with a prime but carb needs rebuilt. It spent most of its life cuttingtimber. Concrete saw uses wasfor a short time during dads retirement

 

[Tomcurtis]

Heyguys cant remember where but ran across reference bout retrofitting a 610 electronic coil into a 10-10. Does.anyone know anything bout this. Ill try to go thru the thread tonight but Iif anyone has knowledge wohld.love to hear bout it

 

[PogoInTheWoods]

The 95553 electronic module is found on both the 600 and 10 series saws with corresponding flywheel 216739 from what I've found so far. Not sure the 95553 can just be swapped over to a 10-10 with one of the points flywheels. Those numbers generally represent the flywheel assembly including pawls, etc., and don't directly cross-reference. I'm sure someone will clarify and elaborate.

 

[fossil]

PM55. We all need a good laugh now and again.

https://www.ebay.com/itm/MCCULLOCH-...593966&hash=item3d57b62b0a:g:hGMAAOSwmRFaboUr

 

[Tomcurtis]

The 95553 electronic module is found on both the 600 and 10 series saws with corresponding flywheel 216739 from what I've found so far. Not sure the 95553 can just be swapped over to a 10-10 with one of the points flywheels. Those numbers generally represent the flywheel assembly including pawls, etc., and don't directly cross-reference. I'm sure someone will clarify and elaborate.

I hope so. Have several 610 Ignitions and am rebuilding a 10-10 and was thinking it might be an upgrade

 

[Tomcurtis]

May have answered my own question. Post over Iin the mac 10-10 thread says yes they work. Just says plug wire is alot longer lol