McCulloch Chain Saws

[sawbones]

I put in my $10 "application" on a 101B 895. You guys know where to look to see it. Hope to read in a few days that someone here had their application accepted. Ron

your out.

 

[8433jeff]

I see a Devil Beaver in there...

I can think of one other person that might look for one in a passle of saws like that.



Hes nuts too.

 

[hammerboyone]

Good junk..?

Well now know how little i know about computers as i just waisted 3.5 hours trying to load some pics...not any closer now then when i started..My night is over hoping not to dream of yellow saws...Will try again tomorrow if i find time..

 

[a. palmer jr.]

Well now know how little i know about computers as i just waisted 3.5 hours trying to load some pics...not any closer now then when i started..My night is over hoping not to dream of yellow saws...Will try again tomorrow if i find time..

It turns out to be not too difficult if you already have pics in your computer.

 

[Brian13]

Well now know how little i know about computers as i just waisted 3.5 hours trying to load some pics...not any closer now then when i started..My night is over hoping not to dream of yellow saws...Will try again tomorrow if i find time..

Your pics may be to large to upload, and may need to be resized before you can upload them.

 

[Brian13]

Hey cpr, here is some videos to get you excited!!!

<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/gL-zsL7DmI0" frameborder="0" allowfullscreen></iframe>

<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/dhgurOBErqY" frameborder="0" allowfullscreen></iframe>

Love the sound with a pipe on it.
<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/nKBKSOhpRBw" frameborder="0" allowfullscreen></iframe>

Another more stock looking one. It is modified to fit the BDC carb though.
<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/XDi71xjMpCM" frameborder="0" allowfullscreen></iframe>

 

[cpr]

Have you been copying my favorites list?

The single carb piped one is the direction I'm leaning.

BTW, you missed one.

<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/VKu3Q1MKxxM" frameborder="0" allowfullscreen></iframe>

Love the kill zip tie, just yank the coil off, hilarious.

 

[Brian13]

I have seen that one too. I am looking forward to seeing what you come up with!!! Last night I had a thought come to my mind, for way down the road. Take a 101 engine and completely custom fab the top to run duel carbs. Would take a lot of fab work, but if you could get it to work, I think it would be pretty cool.

 

[cpr]

No fab necessary, the stuff to do it is readily available. Not sure I want to do that yet. I want to figure out single first.

 

[briantutt]

I can think of one other person that might look for one in a passle of saws like that.



Hes nuts too.

Can't rep you yet but that's funny

 

[Brian13]

Got one more running today. Finally got that 10-10 running, and it seems to be running pretty good. Just need to get some chain for the bar I have for it, not sure how many links it takes though. A husqvarna bar I have is real close, just needs a little drilling on the oil holes, might do that for now just so I can go try it out.

 

[dieselsmoke]

"R" as in Russian. Finned M91 time.

Hmmmm, No hippies round here, the beer cans look scared tho.:msp_mad:

 

[HeRoze]

Well now know how little i know about computers as i just waisted 3.5 hours trying to load some pics...not any closer now then when i started..My night is over hoping not to dream of yellow saws...Will try again tomorrow if i find time..

Did I send you that 'how to' guide??

Unless your pics are too big?

 

[rwoods]

your out.

I knew it would last long. Now, I've got to save up for the application fee for the SP105.

 

[stinkbait]

Just Thought I Would Post Some Pics of One of My Pretty Macs

This is a 440 that I have had for a while. Very nice, even has the little OK stamp still on the bottom.

 

[hammerboyone]

Good junk..?

Does any one use Google chrome and load pics...when i try with the internet explorer the whole thing locks up?? And when i use my Chrome ,the pics just don't do anything..they are not to big.. I've checked everything i know how to do .. I'm not computer friendly at all,and getting less so bye the minute.....

 

[a. palmer jr.]

Got one more running today. Finally got that 10-10 running, and it seems to be running pretty good. Just need to get some chain for the bar I have for it, not sure how many links it takes though. A husqvarna bar I have is real close, just needs a little drilling on the oil holes, might do that for now just so I can go try it out.

My 10-10 with 20" bar took 70 links.

 

[RandyMac]

Under the gunk

After starting the 850 for the last time, last night, about 11pm, I gave it a bath in ATF. Since we are having a gloriously sunny day, I worked outside in shirt sleeves and straw hat. I gave the saw an hour in the sun, then wiped off years of muck, with years of muck remaining. I did find a local logging company's name inscribed on the tank, "Simpson Timber Klamath"

Better yet was the name on a paper tag underneath the airbox cover. No pic, the tag desolved quickly, but not before reading the name on it. More on that later.

Is there a source for AV parts and intake boot? I have everything else.

 

[dieselsmoke]

850 parts

Check out Chainsawr.com, He's got quite an inventory, and his prices are not outta sight.

 

[rwoods]

This is a 440 that I have had for a while. Very nice, even has the little OK stamp still on the bottom.

I like it. Sharp saw. Ron