McCulloch Chain Saws

[paccity]

here ha go terry.

 

[leecopland]

Quick!

here ha go terry.

Paccity, quick get it off the carpet!!

Lee:hmm3grin2orange:

 

[HeRoze]

here ha go terry===

is that enamel or PC?

 

[a. palmer jr.]

here ha go terry===

is that enamel or PC?

It sure looks slick, I'll bet it doesn't get used much!

 

[leeha]

Here are 4 797's Terry needs to see.
Two are Supers. All restored by myself.

Lee

 

[a. palmer jr.]

Here are 4 797's Terry needs to see.
Two are Supers. All restored by myself.

Lee

You do good work!

 

[Brian13]

I would love to see one NOS Lee, because I am betting yours probably look better than when they left the factory.

 

[Rounder]

Been cleaning up my 895 block, but I still have a finger nail catcher below the exhaust port.....Do the rings come down that far on these blocks? Just trying to make sure. Thanks - Sam

 

[Brian13]

The rings will go below the exhaust floor a little bit. Is it transfer or a gouge? BTW did you get the IPL Sam?

 

[Rounder]

The rings will go below the exhaust floor a little bit. Is it transfer or a gouge? BTW did you get the IPL Sam?

Transfer, gave it the acid treatment, cleaned up nice. Got the block all buttoned up this afternoon, just got to start making a few gaskets now.

Thank you for the IPL, very helpful......My memory gets a little fuzzy after 8 months!

 

[climb_on]

I've got a chunk of metal bouncing around inside the muffler of my Power Mac 1000. Can't get it out. I removed the muffler and the cylinder side is intact, so I'm not too concerned about something getting into the cylinder. Do I need to worry about the piece bouncing around in there?

Also wondering if the air filter is supposed to have any filter material inside the filter box? Currently the air filter is basically a box with a very fine screen on both sides. It splits in two pieces, and seems like maybe there should be additional filter material inside?

Hoping to start milling with this beast in the next couple days. Can't wait.

View attachment 230629

 

[Dennis Gauge]

No nothing inside the filter. It should have a felt-like material on the outside.

 

[ChainsawmanXX]

Ok I have a question for everyone!!
I have a D36 with a removable head, I see on Acers Model Profile: D36
That one does not have a removable head. So my question is, whats the difference between one with a removable head and one that does not have a removable head?

 

[RandyMac]

Go back and look at the photos sonny.

 

[ChainsawmanXX]

Go back and look at the photos sonny.

Your right Randy, didnt see the plate there by the muffler. :bang:
Ok then Ill change my question too.. Why do the D36's have removable heads??

 

[RandyMac]

Your right Randy, didnt see the plate there by the muffler. :bang:
Ok then Ill change my question too.. Why do the D36's have removable heads??

Bob only knows, that was changed in '62 I think. Kinda funny as the 3-25 has the full block.
It does make them easier to bore out to the next size up.

 

[ChainsawmanXX]

Bob only knows, that was changed in '62 I think. Kinda funny as the 3-25 has the full block.
It does make them easier to bore out to the next size up.

It does make things ALOT easier... Im gonna have 2 D36's in awhile. Gonna have to get them both running!

 

[OREGONLOGGER]

here ha go terry.

Saw..............................................WEET Thanks Thanks Thanks Thanks Fraz I'll be darn if I can post em here. That be my Super 797 I restored this winter. Paccity is the man thanks for posting these buddy

 

[OREGONLOGGER]

here ha go terry===

is that enamel or PC?

3M base Bumble Bee Yellow HVLP gravity fed, 3 coats of yellow and 4 thin coats of clear fuel friendly poly..no rattle cans in my shop

 

[RandyMac]

Saw..............................................WEET Thanks Thanks Thanks Thanks Fraz I'll be darn if I can post em here. That be my Super 797 I restored this winter. Paccity is the man thanks for posting these buddy

Hmmmm, I have a quart of Ranchero Detonator Yellow Imron paint left. It is some tough stuff.