MS441 R C-M M-Tronic Review and Mods

[blsnelling]

Your saw will blow away any stock 70-80cc saw.

 

[blsnelling]

This 441C-M was stronger/faster than a 046 when only muffler modded. It's in the vids Andre did.

 

[young]

Your saw will blow away any stock 70-80cc saw.

yea but how about ported vs ported?!?!?!?!? :wink2:

 

[blsnelling]

yea but how about ported vs ported?!?!?!?!? :wink2:

I never "raced" them but the 460 440/460 is stronger and faster than the 441. I'd post vids but I'm on my phone.

 

[blsnelling]

yea but how about ported vs ported?!?!?!?!? :wink2:

Any ported 70-80cc saw? Lol, no I won't go that far!

 

[rms61moparman]

Your saw will blow away any stock 70-80cc saw.

Now be careful making blanket statements like that Brad.


Mike

 

[Andyshine77]

Now be careful making blanket statements like that Brad.


Mike

What???? Now Mike you know very well you're not a true sawyer unless you have a ported 441, and your running from trees that are about to fall on you day and night.

 

[blsnelling]

Now be careful making blanket statements like that Brad.


Mike

Bring it on

 

[blsnelling]

What???? Now Mike you know very well you're not a true sawyer unless you have a ported 441, and your running from trees that are about to fall on you day and night.

Simmer down, Grumpy!

 

[lone wolf]

I've had two 441s now. I still prefer a 460 or 440/460 hybrid. I can get more from them.

That is the only reason?

 

[Stihlman441]

I think it's time to found the MTron Inc. organization, who else wants to join? :hmm3grin2orange:[/QUOTE]

Count me in.:msp_biggrin:

 

[rms61moparman]

I'm just saying that I've run a couple of the 044's with the small wristpin that would put a LOT of ported saws back on the truck.


Mike

 

[blsnelling]

I'm just saying that I've run a couple of the 044's with the small wristpin that would put a LOT of ported saws back on the truck.


Mike

I doubt there's any 044 stronger than a 7900, right?

 

[mdavlee]

Now ya'll are cheating bringing the 10mm 044s into it. Those are a real nice runner for the size. The one I had ran with a newer 460 both stock.

 

[blsnelling]

Now ya'll are cheating bringing the 10mm 044s into it. Those are a real nice runner for the size. The one I had ran with a newer 460 both stock.

I don't doubt that one bit. I have a 10mm cylinder I was going to use on that new 440 I just sold. They're getting hard to come by, so it's not going anywhere.

 

[Andyshine77]

I doubt there's any 044 stronger than a 7900, right?

You got it!!!!!!!!!!!!!!!!!

 

[mdavlee]

I've got one here myself that I'm going to put on a 044/440 when I come across one again.

 

[rms61moparman]

I doubt there's any 044 stronger than a 7900, right?

You won't find me betting my next paycheck on it!!!

In FACT...I'll guarantee that I can put an 044 in your hands that will outrun a stock 7900.

We all know that if you pull 10 saws of the assembly line right in a row, one will be a SCREAMER, eight will be average and one will be weaker than the rest. That is just a fact of mass manufacturing.

I know where there is an 044 that I will guarantee is completely stock, minus the base gasket, that will run with about any stock 7900 you bring.
If you want I can get the base gasket put back in!!!:msp_biggrin:


Mike

 

[blsnelling]

You got it!!!!!!!!!!!!!!!!!

And what I'm saying is that a ported 441 will spank any stock 70-80cc saw, including a 7900. It only had 8-10% to make up to begin with.

 

[blsnelling]

You won't find me betting my next paycheck on it!!!

In FACT...I'll guarantee that I can put an 044 in your hands that will outrun a stock 7900.

We all know that if you pull 10 saws of the assembly line right in a row, one will be a SCREAMER, eight will be average and one will be weaker than the rest. That is just a fact of mass manufacturing.

I know where there is an 044 that I will guarantee is completely stock, minus the base gasket, that will run with about any stock 7900 you bring.
If you want I can get the base gasket put back in!!!:msp_biggrin:


Mike

I'm saying that I don't think there's a stock 044 that will beat a 7900. Are you talking about a ported one or a stock one? If ported, well, I would hope so.