Nik's Poulan Thread

[BroncoRN]

Hey guys I'm back from the dead. Found a 4000 bow saw in decent shape for $100. What you think?

 

[rms61moparman]

Hey guys I'm back from the dead. Found a 4000 bow saw in decent shape for $100. What you think?

I think the bow alone is worth that ....IF it's in good shape!


Mike

 

[dboyd351]

Hey guys I'm back from the dead. Found a 4000 bow saw in decent shape for $100. What you think?

I've got a good friend that's dying for one of those. Go get it, and if it turns out you don't need it, I'll gladly take it off your hands!

 

[BroncoRN]

I've got a good friend that's dying for one of those. Go get it, and if it turns out you don't need it, I'll gladly take it off your hands!

Ok at the very least I have a backup plan.

 

[barneyrb]

You bunch of old geezers calling each other geezers, pot meet kettle...........

 

[OhioGregg]

Picking up some poulan muscle tomorrow boys...

Not even a little clue Joe!!! So we can at least try to guess what it is.


Gregg,

 

[Mo. Jim]

I bought a Dayton 2Z462A off of ebay Monday,looks pretty clean. I have a pair of green 245's.but I wanted a orange one. I think it would look good with a bow bar on it. What rattle can paint is a close match for this saw?

 

[simmslumber66]

Not even a little clue Joe!!! So we can at least try to guess what it is.


Gregg,

Must be a wild thing...

 

[bcorradi]

Anyone want a Poulan Pro 365 that is in nice shape from I believe 97'? I got it from a guy that says it has been stored in a barn since like 97' till his inlaw gave it to him this year. He has ran it, but he said it is hard to start so I assume it is just fuel delivery issues. Whoever wants it can have it for $25 plus shipping. It comes with a bar and chain also.

300 FPS has claimed it. If something falls through I'll let you know.

 

[Wagnerwerks]

Ok at the very least I have a backup plan.

Put me down for the backup the the backup plan.

 

[Eccentric]

Anyone want a Poulan Pro 365 that is in nice shape from I believe 97'? I got it from a guy that says it has been stored in a barn since like 97' till his inlaw gave it to him this year. He has ran it, but he said it is hard to start so I assume it is just fuel delivery issues. Whoever wants it can have it for $25 plus shipping. It comes with a bar and chain also.

3000 FPS has claimed it. If something falls through I'll let you know.

Good grab Roger. Gotta be fast around here. Roger ain't gonna pass this one up.....but if he does I'd take it for $25 plus the ride.

Put me down for the backup the the backup plan.

Can I be the backup to the backup to the backup plan?

 

[3000 FPS]

Well if you cant find em locally, NATIONAL Part # 15X35X7

Looks like a 6mm wide seal is tough to find and the 7mm is much eaiser. I'm sure the little bit wider seal wont hurt anything.

I went ahead and ordered that seal. I looked it up and I think it will work. It will stick out a little but I do not think it will be enough to hurt anything.

Thanks everyone for your efforts.

 

[joe25DA]

Not even a little clue Joe!!! So we can at least try to guess what it is.


Gregg,

Sure! its Green.

 

[OhioGregg]

Sure! its Green.

That narrows it down quite a bit actually. That eliminates the Poulan Pro saws, most of the older sand cast saws, and all the re badged saws. If we only new the CC.


Gregg,

 

[Modifiedmark]

I bought a Dayton 2Z462A off of ebay Monday,looks pretty clean. I have a pair of green 245's.but I wanted a orange one. I think it would look good with a bow bar on it. What rattle can paint is a close match for this saw?

Jim, Allis Chalmers orange from TSC is a really close match. Good pickup BTW.

 

[Modifiedmark]

I went ahead and ordered that seal. I looked it up and I think it will work. It will stick out a little but I do not think it will be enough to hurt anything.

Thanks everyone for your efforts.

I think there was room to drive em in a bit deeper.

 

[redunshee]

I think there was room to drive em in a bit deeper.

Without going back too many pages to find original post, what saw are you putting seals in? Like to keep ref. material
Bob

 

[Chris J.]

According to UPS tracking, my Dayton 2Z463B has gone out for delivery today. Seller says it's a Poulan 306A, my research here at AS & at CSCC shows Poulan 245SA.


Dayton Chainsaw Model 2Z463B with 20" Bar and Chain | eBay

Am I correct when I see the 306A has a lower profile AF & top cover than the 245SA?

 

[barneyrb]

Am I correct when I see the 306A has a lower profile AF & top cover than the 245SA?

245xx all the way, and yes you are correct

 

[redunshee]

According to UPS tracking, my Dayton 2Z463B has gone out for delivery today. Seller says it's a Poulan 306A, my research here at AS & at CSCC shows Poulan 245SA.


Dayton Chainsaw Model 2Z463B with 20" Bar and Chain | eBay

Am I correct when I see the 306A has a lower profile AF & top cover than the 245SA?

You are correct. I have the same saw and a 245sa. The 306a has a smaller cover. Great price!