Pioneer chainsaws

[WesternSaw]

Ppppppppp!

The P65 came after the Pioneer Partner P62. When I bought my P62 new the dealer had a listing for the P65 but no info. When Poulan Pro took over the saw became Pro 655. A P65 is a very hard saw to find. I have brochure that shows one in a lineup.

Sure is a lot of P's in your sig P62
Lawrence

 

[propliner]

The Pioneer/Partner P65 had a smaller wrist pin, beefier crankshaft and had the unique piston with thick rings and no boost port. The rest of the saw was pretty much the same as the Pioneer/Partner P62.

 

[Jacob J.]

The Pioneer/Partner P65 had a smaller wrist pin, beefier crankshaft and had the unique piston with thick rings and no boost port. The rest of the saw was pretty much the same as the Pioneer/Partner P62.

That's dead on with the P-65 parts I have/had. The crank had a real beefy connecting rod.

 

[WesternSaw]

singleken45 and others

New member singleken45 was looking for some measurements for a Pioneer puller.This is the one I have it's NOS.Maybe someone like FATGUY (Nik) or pioneerguy600(Jerry) could make these and sell them to us Pioneer fellas.

Lawrence

 

[Jacob J.]

Lawrence- That one looks nice. I just use a $4.99 steering wheel puller from NAPA.

 

[Arrowhead]

Is this the plastic cover you guys are looking for?

http://cgi.ebay.com/vintage-PIONEER-P20-P25-air-filter-cover-w-gasket-NOS_W0QQitemZ190367796571QQcmdZViewItemQQptZLH_DefaultDomain_2?hash=item2c52ce0d5b

 

[DroppedP51]

Ive got a P41 with a dud coil But apart from that its in top order
Now NOS and good secondhand parts are imposible to find in new zealand , So Ive heard that a homelite??? coil will fit is this true? or is there another way around it? Thanks guys

 

[Lou]

Owner's Manual

I have an original (generic) Owner's Manual (#431750 English/French) that I got with my FarmSaw (1979 or 80). I have scanned about half of it to *.bmp-s. I will post the entire thing once done to an image hosting site if anyone wants it. I do not have the ability to convert it *.pdf format. This raises 2 questions.
1. Would anyone like a copy?
2. Is someone willing to convert it to a pdf format? It is huge in bmp format.
Lou

 

[Brian VT]

.bmps are huge. You can't set your scanner to .jpg, gif, or .pdf ?
If not, you can convert the .bmps to .jpg using MS Paint. That will make them much smaller. If you can do that, I'd be happy to receive them and create a .pdf for you.

 

[Lou]

A red Pioneer? On my craigslist.
http://seattle.craigslist.org/kit/tls/1568466681.html
Opposite side pictured.

I was wrrrrrrr. I can and am saving them as pdfs.
Lou

 

[Brian VT]

Do you have a program to combine the .pdfs into a single one ?
(Abobe Acrobat, or similar) If not, I'd be willing to do it.
send the files to brianc at knightkitchens dot com

 

[Lou]

Thanks Brian. I do not have anything beyond a viewer. Once all are scanned in it will be coming your way.
Lou

 

[Lou]

Did my part.

It is sent, one group of 40 pages. If need be I can easily break it into 2 groups of 20. Thought it was time I contributed something beyond an occasional CraigsListing.
Lou

 

[pioneerguy600]

A red Pioneer? On my craigslist.
http://seattle.craigslist.org/kit/tls/1568466681.html
Opposite side pictured.

I was wrrrrrrr. I can and am saving them as pdfs.
Lou

Those things look so much like an XL Homelite in those colors.
Pioneerguy600

 

[Lou]

Those things look so much like an XL Homelite in those colors.
Pioneerguy600

What model is it?
Asking $25; We would enter a whole new ice age if bought a new saw.
Lou

 

[Arrowhead]

Here's another cover guys.

http://cgi.ebay.com/vintage-PIONEER-P28-air-filter-cover-used-1074-P26_W0QQitemZ190367980158QQcmdZViewItemQQptZLH_DefaultDomain_2?hash=item2c52d0da7e

 

[artie__bc]

Well guys, here's a list of the Pioneer IPLs I have on .pdf so far:

IEL
Model AB
Model DC
Model M
Model RA (2 versions)
Super Twin

Pioneer
650
1073-2073
1200
1200A
1770-1771
2071
2200 and 2270
2400 and 2460
3071
3200 and 3270
Super 3270
Farmlite
Farmsaw
Farmsaw II
FM
Holiday II 970
Holiday II 1072
P10
P20 – P25
P26
P26E
P28E – P28ES
P28 – P28S
P38
P40
P41 Cutoff Saw
P41 – P41S
P42
P50 – P50S
P51
P52
P60
P61 Cutoff Saw
P61

Pioneer/Partner
P39 (1986)
P39+
P39+ (1987)
P42
P45
P52 (2 versions)
P52+
P62 (2 versions)
P65

Poulan Pro
455
655
655BP

Target
Quickie 42
Quickie 45, 52 & 65
Quickie 52 & 62
Super Quickie 45 & 65

I haven't had time to go through my printed stuff yet, but after I'm moved & settled in I'll try to list that as well.

 

[singleken45]

Pioneer puller

New member singleken45 was looking for some measurements for a Pioneer puller.This is the one I have it's NOS.Maybe someone like FATGUY (Nik) or pioneerguy600(Jerry) could make these and sell them to us Pioneer fellas.

Lawrence

Thanks alot for your help . I have one fabricated but can't find any long screws to fit the threads of the flywheel .The longest I found was 1 1/2" but quite short . If someone could find me a couple of various lenghths , I'd pay for them & postage . Sorry but I can't remeber the size . Email me please at [email protected] . God bless

 

[056kid]

Sounds like a P-65 with a 655 P&C would be the real deal. .

 

[Jacob J.]

Thanks alot for your help . I have one fabricated but can't find any long screws to fit the threads of the flywheel .The longest I found was 1 1/2" but quite short . If someone could find me a couple of various lenghths , I'd pay for them & postage . Sorry but I can't remeber the size . Email me please at [email protected] . God bless

Do you not have a good hardware store nearby that has a good fastener selection?

I bought a $5 steering wheel puller from NAPA and then spent another $6 on extra long fasteners and now I can pull any flywheel on just about any saw, all for $11.