Project Stumpbroke MS362

[Stumpys Customs]

Stock vid runnin a 16'' B&C, 7 pin rim, white oak.
[video=youtube_share;Lq8Ep84FRcw]http://youtu.be/Lq8Ep84FRcw[/video]

Modded vid runnin a 16'' B&C, 8 pin rim, white oak
[video=youtube_share;RD4UJuj7pEQ]http://youtu.be/RD4UJuj7pEQ[/video]

I'll get a vid of it with the 16" & 7 PIN to compare apples to apples.

 

[mattfr12]

Stock vid runnin a 16'' B&C, 7 pin rim, white oak.
[video=youtube_share;Lq8Ep84FRcw]http://youtu.be/Lq8Ep84FRcw[/video]

Modded vid runnin a 16'' B&C, 8 pin rim, white oak
[video=youtube_share;RD4UJuj7pEQ]http://youtu.be/RD4UJuj7pEQ[/video]

I'll get a vid of it with the 16" & 7 PIN to compare apples to apples.

definitely looks like you picked up some speed trying to time it in my head looks like it at least dropped 2 seconds. good job stumpy

 

[Hedgerow]

Got 8.8 sec on the second modded cut...

Good gain in hard wood! I wonder if the 7 pin would have cut even more off that time?

 

[Stumpys Customs]

Got 8.8 sec on the second modded cut...

Good gain in hard wood! I wonder if the 7 pin would have cut even more off that time?

Just got through cutting with the 7 pin. I can't really tell. I'll post it as soon as I get it uploaded.

 

[Stumpys Customs]

This thing was fun to tune with the rev limmiter. I ran it rich enough so it would hold 13,800 then started cutting with it. It loaded up from being pig rich. I had tune tune it in the cut to find the sweet spot.

 

[John_DeereGreen]

Looking good Stumpy...

How do you feel on the strato 362 to the non strato 361? It looks like this one responded pretty well...

Is an unlimited setup possible for one of these?

 

[mattfr12]

well if you guys like this one I'm packaging up a 372xp tomorrow i bought for him to mod giving him an almost blank check on seeing how fast he can make it run.

 

[Stumpys Customs]

Looking good Stumpy...

How do you feel on the strato 362 to the non strato 361? It looks like this one responded pretty well...

Is an unlimited setup possible for one of these?

I think the coil off of a 361 will work.

I'll have to look at the vids to see how they stack up against each other.

 

[Stumpys Customs]

well if you guys like this one I'm packaging up a 372xp tomorrow i bought for him to mod giving him an almost blank check on seeing how fast he can make it run.

You're a very trusting soul.:biggrin:

 

[Hedgerow]

You're a very trusting soul.:biggrin:

But he meant with gasoline Stump...
Sorry buddy...:hmm3grin2orange:

 

[mattfr12]

You're a very trusting soul.:biggrin:

just kinda curious what a bigger budget will do to a saw like a 372

 

[Hedgerow]

just kinda curious what a bigger budget will do to a saw like a 372

That gets the saw an all expenses paid trip to Carthage for proper break in...

 

[mattfr12]

hows the video coming stumpy did you forget to feed the hamster thats powering the modem :msp_tongue:

 

[Stumpys Customs]

Oh, alright
[video=youtube_share;wssvWspAMYE]http://youtu.be/wssvWspAMYE[/video]

 

[atvguns]

Well I have timed the vid in post #1 and the first vid in post #21 about four diffrent times and keep coming up with the same number I thought that dang thing aint a bit faster finally I figure out they was the same dang vid:frown:

So now I am waiting on the modded vid with the 7 pin rim

 

[Hedgerow]

Well I have timed the vid in post #1 and the first vid in post #21 about four diffrent times and keep coming up with the same number I thought that dang thing aint a bit faster finally I figure out they was the same dang vid:frown:

So now I am waiting on the modded vid with the 7 pin rim

So am I!!!

 

[atvguns]

Dang Stump it is pulling that 28" bar like mad I think that thing might make my 044 hide under the bench.

 

[Stumpys Customs]

Well I have timed the vid in post #1 and the first vid in post #21 about four diffrent times and keep coming up with the same number I thought that dang thing aint a bit faster finally I figure out they was the same dang vid:frown:

So now I am waiting on the modded vid with the 7 pin rim

That's some funny stuff right their. I can picture you doin that too. :hmm3grin2orange::hmm3grin2orange:

 

[Stumpys Customs]

So am I!!!

We got about 20 min left. This is still a heck of alot better than dial up. Prolly would go faster if I was useing the puter in the house.

 

[Stumpys Customs]

I'll put all three vids here.

Stock. 7pin rim
[video=youtube_share;Lq8Ep84FRcw]http://youtu.be/Lq8Ep84FRcw[/video]

Stumpbroke 7 pin rim
[video=youtube_share;PbEM-Bnk_o4]http://youtu.be/PbEM-Bnk_o4[/video]

Stumpbroke 8 pin rim
[video=youtube_share;RD4UJuj7pEQ]http://youtu.be/RD4UJuj7pEQ[/video]