Sachs Dolmar Chainsaws Thread
- Thread starter pioneerguy600
- Start date
Help Support Arborist Forum:
nicksterdemus
ArboristSite Operative
Send that one my way & I'll adjust the chain free of charge...
sachsmo
Addicted to ArboristSite
That 133 and 143 have some compression! The only saw that I have ever used that pulled harder is my friends Mac 125.
And that old 153, yeah she runs real good.
Wish I could find an ignition module for that old 152.
And that old 153, yeah she runs real good.
Wish I could find an ignition module for that old 152.
My poulan 6000/152 will hang from the starter with a 36" bar and not fall. Tons of compression. I would like to get a 133 and a 120 at some point. Dont forget a 166
sachsmo
Addicted to ArboristSite
You have been around here long enough to know Lee has all the 166s.
the 143/133 are great saws, my 143 wears a 20 inch bar most of the time and is a real fun saw to run.
I put my milling set-up on the 143 when I had a little carb problem with the 153.
Milling 28" wide Red Oak, the 143 seemed a lot smaller than just 5ccs.
Those 152/153s are torque monsters fo sure!
166? Some day.
the 143/133 are great saws, my 143 wears a 20 inch bar most of the time and is a real fun saw to run.
I put my milling set-up on the 143 when I had a little carb problem with the 153.
Milling 28" wide Red Oak, the 143 seemed a lot smaller than just 5ccs.
Those 152/153s are torque monsters fo sure!
166? Some day.
nicksterdemus
ArboristSite Operative
I think a 133 jug/piston will fit on my 123 and I'd like to have the extra umph.
I'd really like to have a 152/153.
Make me a sweeet deal on the 152 & I'll carry the flame in search of the ignition module.
You can't run but one @ a time anyway...
I'd really like to have a 152/153.
Make me a sweeet deal on the 152 & I'll carry the flame in search of the ignition module.
You can't run but one @ a time anyway...
Last edited:
sachsmo
Addicted to ArboristSite
You need to tell Lee that! I think he will soon be runnin' 16 166s at once! (if he hasn't already)
Wish i could find the link to his vid of 8 of those bad dudes sittin' in a circle idling.
The sound is akin to a fuel car in the staging lanes!
Wish i could find the link to his vid of 8 of those bad dudes sittin' in a circle idling.
The sound is akin to a fuel car in the staging lanes!
That definitely needs to be posted here. It is an awesome video!
I can't do 16 running, But i could do 15.
My last video was 14 running at the same time.
Lee
Many have seen this video, But for those
that haven't and for those who asked.
Here are 14 Sachs Dolmar 166's running
at the same time.
Enjoy Lee
that haven't and for those who asked.
Here are 14 Sachs Dolmar 166's running
at the same time.
Enjoy Lee
How much do I love that video?
So, Lee, what is the deal with #9
So, Lee, what is the deal with #9
nicksterdemus
ArboristSite Operative
Too kewl Lee thanks for sharin'...
So how many GPM (gallons per minute) is that, Lee? :greenchainsaw:
How much do I love that video?
So, Lee, what is the deal with #9
Wacha Mean?
The starting then stalled problem.
Most hadn't been run in awhile.
Lee
With the help from a couple of members I got the 133 all together and running, it was a rainy day here yesterday so a few hours in the shop working on the 133 got it to where its at now. It still needs a tank pickup/vent fitting to be complete but it will run, just don`t tip it on its side. LOL
Pioneerguy600
Pioneerguy600
The brake handle did not want to mount up with the full wrap front handle, there was clearance problems between the black plastic ,Flag, and the top of the fullwrap so I worked with what I had and made up an extender from a piece of 3/16 high tensile aluminum, kinda redneck but it works real good.
Pioneerguy600
Pioneerguy600
