stihl 015 service manual download?
- Thread starter philwarner
- Start date
Help Support Arborist Forum:
Check your inbox
Awesome! Thanks for the quick reply!
Bob Pattison
New Member
Bob Pattison
New Member
I'm new to this so be patient! I'm looking for a decent 8 tooth 1/4" pitch sprocket for my 015l. My wife thinks I should try some chain saw carving and I need to keep it 1/4" pitch so I can get a carving blade for it. Also I'm seeing a ton of posts for the service manual but no real answers on how to get one so any help is appreciated. Thanks to all!
Check your inbox Bob.
Hello,
I would also like a copy of the Stihl 015L Service Manual.
Please Mr. Benson, since you seem to be the man who has the .pdf, would you also send it to me?
If you can email it to [email protected] that would be great.
Thanks in advance.
David Lund
Gainesville, Georgia
I would also like a copy of the Stihl 015L Service Manual.
Please Mr. Benson, since you seem to be the man who has the .pdf, would you also send it to me?
If you can email it to [email protected] that would be great.
Thanks in advance.
David Lund
Gainesville, Georgia
She's a cutie... check your inbox
Irquomai
New Member
I have an old O15L that has no manual. I am trying to change the rewind pawls on the flywheel. Can anyone help?
- Joined
- Dec 6, 2014
- Messages
- 21,332
- Reaction score
- 25,429
You should have to remove the flywheel and tap the pins out with a punch.
- Joined
- Dec 6, 2014
- Messages
- 21,332
- Reaction score
- 25,429
But finding new pawls might be the hard part.
- Joined
- Dec 6, 2014
- Messages
- 21,332
- Reaction score
- 25,429
Many flywheels on E-bay.
Irquomai
New Member
Ok, remove the flywheel. I can do that. How about a parts or service manual. any idea how to acquire those? Thanks for the help with the pins.
Check your inbox
Just picked up a shelf Queen 015 at a local second hand store. Compression is 175 psi and I it did get it to run, but the fuel line is toast. Have a part on order, but found that both chain guide plates are missing.
a 015 service manual would be a great help in the refurbishment.
a 015 service manual would be a great help in the refurbishment.
Check your inbox, and welcome to AS.
Bob Pattison
New Member
I found a source for Brand new 8 tooth, 1/4" drive sprockets for 015 Stihl saws. They are located in Germany so the language barrier is an issue but I ordered it through eBay, I received a tracking number within a day and was able to track it until it entered customs then the tracking number was useless. I reached out to eBay on two different days trying to locate my order but never received a response ( I only emailed eBay, I didn't call them ). The estimated delivery was between one week and almost a month so I wasn't too worried. About one week before the final date I received my order that surprisingly had to be signed for because it was from another country! The new sprocket and new needle bearing fit perfectly for around $25.00 ( less than I paid for a used one that is half worn out! ) I haven't used the saw yet but this went together with no modifications ( unlike the chamfering I had to do on the new 6 tooth 3/8 drive sprocket I bought for my other 015 ) l don't check my emails often so please try this google search on your own before asking assistance. Just google ( kettenrad 1/4" 8Z passend fur Stihl 015 at saegenspezi ) this will bring up other sites including an Amazon link but the seller I ordered from was saegenspezi. Good luck and have patience. I felt like a guinea pig on this one not knowing if I would get my part and not knowing if it would be the correct one. I'm sure many of you will be happy to find this needle in the haystack!
Lincoln Milner
New Member
Recently refound my dad's 015L, and it needs a bit of work. I'm starting to get it apart and cleaned, but any manuals/diagrams/etc. that folks would be willing to share would be most appreciated. I'd love to get her running to have a smaller saw to take around on my farm. Cheers!
