Stihlmans Wood,Tree cutting ramblings...........

[deye223]

What brand of semi and are the rakers set up properly? Low rakers and bore cutting do not mix.

stihl 46rm i have tryed 10T 12T sprocket nose bars but it will not do it , stock and droped rackers makes
no diff

 

[deye223]

yeah its all good, just i hate stringys with pipe's, usually the more mature the stringy is the more termite infested it could be ..never had a prob boring with .404 tho mate.

next time out will vid and you tell what i'm doing wrong after ya have a laugh

 

[bezza1]

great pic there mate

i took the 880 , 2101xp , 999F and the 660 out on the weekend dropped a few and one was about 34" it had a good 10"-15"- pipe through the guts my first chain on the 660 dulled rather quick i bucked it up it should be dry for burning next
year

 

[WidowMaker1]

next time out will vid and you tell what i'm doing wrong after ya have a laugh

yeah righto ,ill bring the beer and peanuts .lol

 

[WidowMaker1]

Or more importantly change your felling technique unless of course you are running this super awesome homemade NASA farm spec mill incorporating 28kg of welding rods and need good logs...

lol. well right of course, me go hard or go home hillbilly mill.

 

[deepsouth]

Nothing like a hollow log in a bush campfire, aim the cannon and then drop projectiles in, like empty aerosol cans, champagne bottles with a bit of water in the bottom and the cork replaced, cooking oil aerosol cans, biggest bang I've ever seen was when a nearly full paslode gas cylinder went in. :smile2: :wink2:

Just need to watch who is around and down range. And the fire hazard conditions too, dry scrub is a bad target.

 

[bezza1]

Nothing like a hollow log in a bush campfire, aim the cannon and then drop projectiles in, like empty aerosol cans, champagne bottles with a bit of water in the bottom and the cork replaced, cooking oil aerosol cans, biggest bang I've ever seen was when a nearly full paslode gas cylinder went in. :smile2: :wink2:

Just need to watch who is around and down range. And the fire hazard conditions too, dry scrub is a bad target.

yeah those paslode cans are great ive gt about 40 empty ones here good for new years

 

[Stihlman441]

A new toy,i mean work tool to the collection HT 131 Pole saw.

 

[Rudolf73]

Cool! have you done a MM yet??

 

[Stihlman441]

Cool! have you done a MM yet??

Na but i did look at it.

 

[sun64]

Na but i did look at it.

Nah Andrew, just post it over to the states and get it ported.
Be peanuts to someone like you.

 

[bezza1]

Na but i did look at it.

hay mate they are very sensitive to MM

 

[MCW]

hay mate they are very sensitive to MM

In a negative way though.

 

[WidowMaker1]

yes Bezza1 thats me on Gumtree. lol

 

[bezza1]

In a negative way though.

i did a 120 the other week only a tiny bit dident open it up much at all and i had to go buy a new muffler it just wouldn't tune

 

[bezza1]

yes Bezza1 thats me on Gumtree. lol

hahaha sweet mate we should meet up one day and go do some cutting then have a beer

 

[WidowMaker1]

yeah no worries Mate, lets get Fubar.

 

[MCW]

i did a 120 the other week only a tiny bit dident open it up much at all and i had to go buy a new muffler it just wouldn't tune

Yeah I've heard the 4 Mix motors just need to be left as is from the factory.

 

[deye223]

hahaha sweet mate we should meet up one day and go do some cutting then have a beer

yeah no worries Mate, lets get Fubar.

yes i reckon we need to have a GTG

 

[David (saltas)]

the last person who said 6t6 got the hump and left when it did not happen