Sure is quiet in here....do I need to start a fight?

[Scooterbum]

Their's a word for you..............jus' sayin'

Think I got my machinist buddy started on CAD ! LOL Called me yesterday to ask if I wanted that little Homie back I just gave him. NO !! Says it starts 2nd pull every time. LOL
He had one saw , a wildthigny !! Has cut all his fire wood for 6 years with that thing ! And it stihl runs !! Amazing cause his only heat is wood ! Now he is up to 7 !! LOL And has them all running ! I gave him 5 his BIL gave him one. LOL

How in the hell can a wildthingy last that long,and gets used a lot ! Only thing ever done to it was the rope was replaced 3 times ! Plus many B&Cs. LOL
If he had anything big his FIL would bring his 041 over and cut it up for him. It was bought new in 1969 , never been to the shop for anything !

Must really take care of stuff very well !

......

<iframe width="420" height="315" src="http://www.youtube.com/embed/3XqyGoE2Q4Y" frameborder="0" allowfullscreen></iframe>

 

[Jon1212]

Think I got my machinist buddy started on CAD ! LOL Called me yesterday to ask if I wanted that little Homie back I just gave him. NO !! Says it starts 2nd pull every time. LOL
He had one saw , a wildthigny !! Has cut all his fire wood for 6 years with that thing ! And it stihl runs !! Amazing cause his only heat is wood ! Now he is up to 7 !! LOL And has them all running ! I gave him 5 his BIL gave him one. LOL

How in the hell can a wildthingy last that long,and gets used a lot ! Only thing ever done to it was the rope was replaced 3 times ! Plus many B&Cs. LOL
If he had anything big his FIL would bring his 041 over and cut it up for him. It was bought new in 1969 , never been to the shop for anything !

Must really take care of stuff very well !

Man, that reminds me of that time you gave me all of those saws..............oh wait, that wasn't you. You've never given me anything but a bunch Googball crap.:msp_angry:



:msp_wink:

 

[IEL]

slackers :msp_razz:

Im finally in the mood to work on saws, and im stuck in bed... :msp_angry:

 

[farrell]

Can any one tell me why a store the size of sears that carries an enormous tool selection doesn't have any torx sockets?

Off to the next store...........

 

[tbone75]

Can any one tell me why a store the size of sears that carries an enormous tool selection doesn't have any torx sockets?

Off to the next store...........

Lowes maybe ? That funny looking set I have is craftsman ? It suppose to fit everything ? LOL It has so far ?

 

[tbone75]

Man, that reminds me of that time you gave me all of those saws..............oh wait, that wasn't you. You've never given me anything but a bunch Googball crap.:msp_angry:



:msp_wink:

I am so sorry !

I will dig up a mini-mac to send you ASAP ! :msp_rolleyes:

 

[tbone75]

Just did part of the application for the OL , guess it timed out on me? Hit the next page and lost it all !!!!!!!!!!!!!!!!!!!!!!!!!! Now I have to redo all that chit and hope I am fast enough !!!!!!!
I only got 2 fingers to use !!

:msp_angry::censored: :ah:

 

[Adirondackstihl]

I am so sorry !

I will dig up a mini-mac to send you ASAP ! :msp_rolleyes:

I'll take a mini-mac

 

[farrell]

Lowes maybe ? That funny looking set I have is craftsman ? It suppose to fit everything ? LOL It has so far ?

Blowes wasn't on my route

I saw the everything sockets at sears but didn't think they were long enough for the job

 

[farrell]

I fired up the tractor to see if gas is still gettin into oil and it doesn't appear that it is

Tho I had the fuel shut off

It is popping a lil at idle and full throttle

Goin to hit a couple other stores to see if they have the sockets

Pull the valve covers tomorrow

 

[farrell]

I figured I would monkey with the tractor a lil and check a couple other things

I disconnected the kill wires from the coils to see if that might help

Nope

And since there is no way to turn the tractor off at that point I turned off the fuel

Waited and kept runnin

Ok so I pulled the fuel line off the carb

Waited and kept runnin

So I kinked the hose and it finally stalled

How long will the tractor run on the gas in the bowl?

This was over a couple minutes

 

[pioneerguy600]

I figured I would monkey with the tractor a lil and check a couple other things

I disconnected the kill wires from the coils to see if that might help

Nope

And since there is no way to turn the tractor off at that point I turned off the fuel

Waited and kept runnin

Ok so I pulled the fuel line off the carb

Waited and kept runnin

So I kinked the hose and it finally stalled

How long will the tractor run on the gas in the bowl?

This was over a couple minutes

Until it runs outa gas!

 

[tbone75]

Until it runs outa gas!

Dang it !


Beat me to it !


:hmm3grin2orange::hmm3grin2orange:

 

[IEL]

A little survey for all the hunters here. What is your favourite knife/knife team for skinning and processing deer/moose/elk? I am trying to figure out a good setup for my first mule deer hunt (hopefully) this fall. Maybe a dedicated skinner and a general hunting/outdoors knife for joint/limb removal. I am leaning towards a buck 119 (I have wanted one for years, just such a classic) paired with either a grohmann or something along the lines of a buck 103 or puma hunters pal. (even though I enjoy making knives, I still would buy the classics)

And as to try and stay somewhat on topic (does this thread have a topic?) Does 79 dl sound right for a pioneer farmsaw with a 24 inch bar? (3/8 pitch chain) I dont really trust my counting of identical segments of a loop... LOL

 

[tbone75]

Done very little today , just not up to it.
Messed with the 36 a little,made a chain for it. Took it out to try it,WTF ? Won't run fer chit mow , it acts like it has a air leak. LOL Ran fine yesterday ?
Fixed the wires,it stops now ! The black wire was bad. Seems the end wasn't on right when the made it. Pulled right out !
Guess I will tear it down to find the leak.

 

[IEL]

I figured I would monkey with the tractor a lil and check a couple other things

I disconnected the kill wires from the coils to see if that might help

Nope

And since there is no way to turn the tractor off at that point I turned off the fuel

Waited and kept runnin

Ok so I pulled the fuel line off the carb

Waited and kept runnin

So I kinked the hose and it finally stalled

How long will the tractor run on the gas in the bowl?

This was over a couple minutes

That sounds a bit long. I have an old wisconsin stationary engine with a carb bigger than most lawn tractors. (really big for its power/displacement) Anyways, the vibrations would shut the fuel valve off unless I wired it in place. From a fully open valve, start up to vibrating closed to shutoff was at most 4 minutes. That time includes it slowly working its way closed and running dry. I think yours was somehow still getting fuel. (no idea how, but that sounds like it was running way too long)

 

[tbone75]

A little survey for all the hunters here. What is your favourite knife/knife team for skinning and processing deer/moose/elk? I am trying to figure out a good setup for my first mule deer hunt (hopefully) this fall. Maybe a dedicated skinner and a general hunting/outdoors knife for joint/limb removal. I am leaning towards a buck 119 (I have wanted one for years, just such a classic) paired with either a grohmann or something along the lines of a buck 103 or puma hunters pal. (even though I enjoy making knives, I still would buy the classics)

And as to try and stay somewhat on topic (does this thread have a topic?) Does 79 dl sound right for a pioneer farmsaw with a 24 inch bar? (3/8 pitch chain) I dont really trust my counting of identical segments of a loop... LOL

Can't help ya much , I only use my own knives. One for everything is all I ever needed ? But deer are the biggest thing around here. I gutted & skinned out 3 deer once,it was stihl cutting. LOL I would bet it would do a moose ok. 4" blade is all you ever need. I would want something more than just a knife to quarter a moose. Make your self a game ax.

No idea on the B&C ?

 

[farrell]

Until it runs outa gas!

Smart azz nadian

I left the door open for it tho

 

[dancan]

Man , I luv that tiller , not as nice as Robin's tractor setup and may not get in where a Mantis can go but it sure does till LOL
Yes John , I can fix some things , threw a bunch of $$ at the KM55 and PRESTO !!! All fixed .
I mounted a gear head on a FS86 that was from an old style FS76 , the drive is the same size but the shaft was smaller on the FS86 , fixed that with a pop can shim and fixed up the trimmer head .
Got the FS550 fired up after being shelved for a year .
Got the other guy's OH26 dusted off and fired up after being shelved for a year .

:tongue2:

 

[tbone75]

A friend of the OLs is coming over to do her application !


Got out of that chit !