Sure is quiet in here....do I need to start a fight?

[pioneerguy600]

Have a good trip !

Waiting for the rest of the crew to show up, they were supposed to be here at 5:45 but Tim Hortons must have gotten in the way.....Slackkkkeeerzzzzz.

 

[jimdad07]

Good luck Jerry. You using fly rods or spinning rods?

 

[dancan]

Jerry's uses a flyrod .
I've gots extra coffee if any of you girls need some wake up and get goin fix ..........

 

[Cantdog]

Have fun Jerry!!! Spent last evening going over the new motor....hanging inches from where it will need to go.....some modifications will have to be made to the craft. Lot more "Stuff" on this motor......."Stuff" takes up more room in an already cramped space.....need different access to different "Stuff"......so some of the craft must leave.......bringing my SawzAll and sabre saw back to the shop from the jobsite tonight. Tomorrow will the first full day of installation work.

Five more triaxel loads of nice clean gravel came to the shop......'nuther 100 cu.yds. Lewis came down with a giant wheel loader and flattened the whole lot off.....then told me he would be back with the giant vibratory roller and vibe it then mulch the banks and hydroseed the perimeter .....just part of their responsibilities when dealing with a "Waste site" LOLOLOL!!!! That much "Waste" would have cost me $15,000 to $20,000....LOLOL!!!! Now I gotts a very sweet and hard "Flat Spot" that extends the earlier "Flat spot"for $40 in diesel and $42 in silt fence!!!!!!

Was looking forward to a day off.........but it looks like all John's rain is just skirting south of me...right along the edge of the coast/offshore islands......heading for Nova Scotia....'nuther day on the staging....cedar shingling for me!!! Looks like Ron is getting wet though.........

 

[BigDaddyR]

IDK how yall expect to get anything done! Always sleepin!

Looks like a big giant spider that woulda been squashed instead of getting its picture taken hahah

Think Ill throw the top down and ride up to W.

Oh, he didn't last long. Another good use for the Haix boots.

Good luch Jerry. Have fun!


Sent on the fly.

 

[Jimmy in NC]

OH WOW !!!! lookit THAt fine piece of equipment !!

MAN !! that is AWSOME !!

YOU the man DAn !!

i'm jelouse !!

GOOD FOR YOU !!!!!!!!!!!!

UNBELIEVABLE !!!!

SURE LOOKS great !!.

now whack that little critters head off...

Best post I've read in a while!

Yuck, pricing parts to rebuild my boat motor while listening to the storm rolling through. Whos got a source for the best prices? 76 Johnson 35 needs pistons and rings haha Everytime I get ready to sell something, it ends up like this!

Cant wait to see what the Kubota has in store for me when I get the rearend/tranny pulled out. Hoping minimum carnage, but expecting the worse. Still probably come out on top. Gotta quit buying stuff and start fixing!

And leave dan's poor doggy? alone!

You'll learn young grass hopper.. projects are fun but quicky multiiply at an exponential rate. As for the motor.. you sure the cylinders are good? Most of the time you take a piston out on an OMC power head you need the power head.

Have fun Jerry!!! Spent last evening going over the new motor....hanging inches from where it will need to go.....some modifications will have to be made to the craft. Lot more "Stuff" on this motor......."Stuff" takes up more room in an already cramped space.....need different access to different "Stuff"......so some of the craft must leave.......bringing my SawzAll and sabre saw back to the shop from the jobsite tonight. Tomorrow will the first full day of installation work.

Five more triaxel loads of nice clean gravel came to the shop......'nuther 100 cu.yds. Lewis came down with a giant wheel loader and flattened the whole lot off.....then told me he would be back with the giant vibratory roller and vibe it then mulch the banks and hydroseed the perimeter .....just part of their responsibilities when dealing with a "Waste site" LOLOLOL!!!! That much "Waste" would have cost me $15,000 to $20,000....LOLOL!!!! Now I gotts a very sweet and hard "Flat Spot" that extends the earlier "Flat spot"for $40 in diesel and $42 in silt fence!!!!!!

Was looking forward to a day off.........but it looks like all John's rain is just skirting south of me...right along the edge of the coast/offshore islands......heading for Nova Scotia....'nuther day on the staging....cedar shingling for me!!! Looks like Ron is getting wet though.........

You sure you got 100 CY on 5 tri-axles? Maybe 100 tons or ~50CY? If you guys are hauling that much in a tri, send them south. I'll work them all they want and get rid of these quads and quints!



Big day for me yesterday at work. Summer season has hit and I've got two schools and a huge road widening for a large tract builder to get done in less than 3 months. Busy busy busy. Did get to scrap a bunch of chain link fence yesterday. While loading my single axle trailer everyone was guessing how much weight was on it. They were all around 1500-1800 lbs or one guys guess was 900 lbs. I told them 2800 was my guess and they thought I was nuts. Scaled it at 3140. They couldn't believe it but I told them... I built the trailer and knew how stout it was!

Back to the grind now.. you slackers behave while Jerry is gone! :hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

 

[roncoinc]

 

[tbone75]

You really want me to spit my Dew everywhere don't you ! :hmm3grin2orange::hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

 

[farrell]

Dan sendin you pics of his dog (aka a gremlin to the rest of us) again?

 

[farrell]

Mornin all!

Checked a few things on the tractor this morning

Spark=good

Compression=good

Fuel=not a 100% sure on

Dropped the restrictor gasket and swirl plate in carb see if it helps

Battery is dead gotta jump it see if it runs

Gotta call Ron's friend this mornin

 

[tbone75]

Bad morning

 

[Stihl 041S]

Noisy bunch of Wackos!!!!

 

[roncoinc]

Dan sendin you pics of his dog (aka a gremlin to the rest of us) again?

Looks like his pet,,,,,,,,,whatever it is

 

[tbone75]

Night guys. Getting ready to hit it myself.

DW found this lurking in the bathroom. Any idea what kind of peeping Tom it is?

Sent on the fly.

No idea ? Glad its a good one now ! LOL
Looks something like what we call woods spiders we have here,big SOBs ! 3" is the biggest I have seen.

 

[tbone75]

Noisy bunch of Wackos!!!!

Takes one to know one ! :msp_w00t:


What the H are you doin up ?

 

[farrell]

Noisy bunch of Wackos!!!!

Point being?

 

[Stihl 041S]

Point being?

Just sayin........

Hey Adam!!!!

 

[Stihl 041S]

Takes one to know one ! :msp_w00t:


What the H are you doin up ?

Good point John ...........Niue all

 

[tbone75]

Hope this wind dies down so I can spray my trim outside ! Really don't want to stink up the basement.

 

[Stihl 041S]

Good point John ...........Niue all

Huh. Niue.....an island nation. Part of New Zealand.

Once in a while Autocorrect teaches ya somethin'