Sure is quiet in here....do I need to start a fight?

[farrell]

Still no runny on cylinder oney

Has to be a carb problem

Don't care for the fog of atomized gas rollin back out the air intake when motor is shutdown

 

[jimdad07]

Adam do you have a stuck exhaust valve by chance?

 

[tbone75]

Still no runny on cylinder oney

Has to be a carb problem

Don't care for the fog of atomized gas rollin back out the air intake when motor is shutdown

I will look around for a cab,Nephew could have something ? But never know when I will see him,he has another GF. LOL I will give him a call later,he would be sleeping now.

 

[Jimmy in NC]

Adam do you have a stuck exhaust valve by chance?

Or clogged exhuast header on that cylinder? Mouse nest or something?

 

[tbone75]

Adam do you have a stuck exhaust valve by chance?

He had that all apart,all looks good ?

 

[tbone75]

Got another chuck in the front yard ! #4 for this year,I think ?

 

[tbone75]

Fred-X just brought a new toy ! Not a saw , dang it ! But stihl a good one !

Now I can have fries and gravy all the time ! LOL

Seen a cooking show the other day about making fresh cut fries,said to soak them in water with a splash of whit vinegar over night to keep them crispy ? Gonna try it !

 

[7hpjim]

Looks like your saws have been breeding there Jim ! LOL

Just added a 2101xp and a p42, got to file the fuel cap on the 42, all swelled up from today's crap gas!!

 

[roncoinc]

Fred-X just brought a new toy ! Not a saw , dang it ! But stihl a good one !

Now I can have fries and gravy all the time ! LOL

Seen a cooking show the other day about making fresh cut fries,said to soak them in water with a splash of whit vinegar over night to keep them crispy ? Gonna try it !

I have a french fry cutter from a rest..

dont havta soak overnight,hour will do,,drain and put in freezer until just start to freeze then fry

 

[7hpjim]

Got another chuck in the front yard ! #4 for this year,I think ?

What have you been smokin em wit??

 

[Cantdog]

Best post I've read in a while!



You'll learn young grass hopper.. projects are fun but quicky multiiply at an exponential rate. As for the motor.. you sure the cylinders are good? Most of the time you take a piston out on an OMC power head you need the power head.



You sure you got 100 CY on 5 tri-axles? Maybe 100 tons or ~50CY? If you guys are hauling that much in a tri, send them south. I'll work them all they want and get rid of these quads and quints!



Big day for me yesterday at work. Summer season has hit and I've got two schools and a huge road widening for a large tract builder to get done in less than 3 months. Busy busy busy. Did get to scrap a bunch of chain link fence yesterday. While loading my single axle trailer everyone was guessing how much weight was on it. They were all around 1500-1800 lbs or one guys guess was 900 lbs. I told them 2800 was my guess and they thought I was nuts. Scaled it at 3140. They couldn't believe it but I told them... I built the trailer and knew how stout it was!

Back to the grind now.. you slackers behave while Jerry is gone! :hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

Yeah...... very short haul from the site to my shop...maybe, not quite 1/3 mile....go heavy, go often.....Mack tris hauling 18-22 yds......Even the Mack 10 wheeler has high sides..driver said that was scaled @ 19 yds....it was always full above the sideboards....Lewis don't like slackerzzzzz....

 

[Stihl 041S]

Going to take the midget cat for a walk. LOL Goofy cat goes with me every morning for my walks. LOL Or if it sees me outside it comes running just like a dog ? LOL

I had a cat that would follow me like that.

Sit when fished.

Even went when I went hunting.

 

[farrell]

IT'S ALIVE!!!!!!!!!!!!!!!!!

Pulled carb again and check passageways looked good

But oh what is this?

The orifice fell off of main jet at bottom of float bowl!

Reassembled carb put back on tractor and started it up

Not one but TWO cylinders working!!!!!!

Yay!!!!!

Happy dance!!!!!!!!!!

Hopefully it stays runnin!

 

[little possum]

Hooray for Adam!
Simple things will drive you crazy. I did a quad a while back: ran, idled, would run then die.. WTH.... Didnt get the pin that held the float in hahah

Now wanna fix the Kubota for me? Just moved the IH454 over. Got to get to it soon.

Jimmy, Im not sure. Looked like just transfer on the cylinders. Cleaned with acid then honed. Need to measure it all I guess.. Cheap to bore them out, but hoping I could get by with standard replacements. Got 8+ bolts broken/stuck that I need to get removed.

 

[AU_K2500]

Boss man finally brought the homelite he was telling me about a Super clean, low hour Homelite Super XL automatic. even the Original Bar is in good shape. should be as simple as cleaning, carb kit, fuel line and filters. nice little saw. everything there, nothing cracked or missing. should be a quick easy repair.

Congrats on the Fix Adam, I would have resorted to violence long ago....

 

[IEL]

Glad you got it working. :msp_thumbsup:

 

[farrell]

Boss man finally brought the homelite he was telling me about a Super clean, low hour Homelite Super XL automatic. even the Original Bar is in good shape. should be as simple as cleaning, carb kit, fuel line and filters. nice little saw. everything there, nothing cracked or missing. should be a quick easy repair.

Congrats on the Fix Adam, I would have resorted to violence long ago....

It almost became violent on several occasions!

Was gonna barrow my buddy's .50bmg and put it outta my misery!!

It ran good for ten minutes or so before I shut it down

I do have a charging problem I have to address now

Thanks to everyone for advice and suggestions

 

[Stihl 041S]

Atta Boy Adam!!!!

Ain't physics great?!!??

 

[little possum]

physics: "What I cant get running, never ran before?"

"If that doesnt fix it, burn it?"

 

[SawTroll]

Very quiet here today :msp_sleep:, after a quite lively last night!