I forgot , I also put in anuther row of bush beans and some squash .
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
roncoinc
Official Stihl Disser
I aint no sulg Bahahahahahahahahahahaha Ha !!!!
I ate muh ice ceam, had a Shipbuilders Hard cider after that cause it's hot , trouble shot the neighbors mower and figured out why it wouldn't run , had a Maibock , put gas in it and mowed muh lawn , had a Maibock and a kotten kandy light , put togrther a wood fired forege and tested it , had a Maibock and wathched the test go A#1 , tore out my neighbors ex boyfriend's fence , all the posts were set in ciment :msp_angry: got the Bota out to move all the posts , got a flat on the bota :msp_angry: so I'm havin anuther Maibock and lookin at the kotten kandy light
This 7% 500 ml stuff is like what , 4 or 5 of your Merican beers ???
Dunno where you get that " merican " beer thing from ??
Ah aint seen no nadian beer %10 like we got here !!
%7 is common here..
roncoinc
Official Stihl Disser
last trip out on the blue water my friend got me some sea clams,,not edible as they are BUT,,,,,,,,,,,,,,,,,,,
grind them up in the food processor,,add and egg and some good merican beer,,,pancake mix,,flour,,bread crumbs,,herbs and spices,etc....
deep fry and a little slice of heaven !!
grind them up in the food processor,,add and egg and some good merican beer,,,pancake mix,,flour,,bread crumbs,,herbs and spices,etc....
deep fry and a little slice of heaven !!
last trip out on the blue water my friend got me some sea clams,,not edible as they are BUT,,,,,,,,,,,,,,,,,,,
grind them up in the food processor,,add and egg and some good merican beer,,,pancake mix,,flour,,bread crumbs,,herbs and spices,etc....
deep fry and a little slice of heaven !!
May be good nuff to eat ? LOL
My new camper is a real peach ! OLD ! LOL But it don't leak !! 
Need to gut it too , even has the bedding stihl in it ? LOL Least it aint wet and moldy ! Maybe a 20' camper ? And less to tear out !
Nephew just told me he can get me 4x4 -3/4" sheets of plywood and 4' 2x4s free ! Told him 2 truck loads should do it. LOL
Nephew just told me he can get me 4x4 -3/4" sheets of plywood and 4' 2x4s free ! Told him 2 truck loads should do it. LOL
Camper cost me big time ! Had to give up my old tin PBR sign ! LOL It came out of my favorite watering hole years ago. LOL No I didn't stihl it ! Bar tender gave it to me , along with a couple others they had in the basement. LOL
What kind of sea clams ????
We've got some that non Acadians won't eat because they don't know how LOL
The only Merican wee see up here is the Bud , Coors and Busch pizz lite or stuff I dare not try .....
I have a cousin in BC , I might try the Bud from there , maybe , they say it's pretty good ....
We've got some that non Acadians won't eat because they don't know how LOL
The only Merican wee see up here is the Bud , Coors and Busch pizz lite or stuff I dare not try .....
I have a cousin in BC , I might try the Bud from there , maybe , they say it's pretty good ....
last trip out on the blue water my friend got me some sea clams,,not edible as they are BUT,,,,,,,,,,,,,,,,,,,
grind them up in the food processor,,add and egg and some good merican beer,,,pancake mix,,flour,,bread crumbs,,herbs and spices,etc....
deep fry and a little slice of heaven !!
Grind the raw ???
What herbs and spices ???
We had a local fellow years ago that used to run a small seafood take out , he had a clam burger called the CB Burger , never had anything that tasted like it , it was the best , musta been putin the hurt on the competition because the food inspectors soon paid him a visit and wanted to know what was in it .
GFY was the answer and he took it of the menue .
Never have had it since
Grind the raw ???
What herbs and spices ???
We had a local fellow years ago that used to run a small seafood take out , he had a clam burger called the CB Burger , never had anything that tasted like it , it was the best , musta been putin the hurt on the competition because the food inspectors soon paid him a visit and wanted to know what was in it .
GFY was the answer and he took it of the menue .
Never have had it since
I would guess cat ? CB Burger ? LOL
If cat was that good , Hmmmm ..........
Hey John !!!
The homemade forge on it's first test run .
The homemade forge on it's first test run .
AU_K2500
NSM
Got the SXLAO torn down and cleaned up. I've never worked on a saw this clean. Except for maybe the Farmsaw. Got it almost all back together just waiting on a carb kit. This suckers sure has a big gas tank!
Day could have not been any better. The two saws I got were aPM270 and a homie7-19. Also got the parts to build a Mcculloch two man.
Best part was that the museum put me in charge of saws. Basically that means I get to restore and look after almost 50 really old saws. Including 4 IEL beavers, 2 pioneer ABs , a diston da211, 5 hornets (1 man and two man), several big pm muscle saws including the pm 270 and 276, atleast 4 PM universals, several six cube Mcculloch, close to 6 IEL super pioneers, and a ton of other large felling saws, and atleast 10 two man's.
Each even better part? They put aside a trailer to store all the restored saws, including my own collection. I can also have any of the saws come and go as I please, to work on or use. I could go in and take 3 IEL beavers for a month if I wanted. I can also take parts from any of the saws I need to. Basically, I got 50 vintage saws, and unlimited storage today. Even though they are technically still the museums, I am the only one who runs them or works on them, and I can take them whenever I want to for as long as I want to. They dont care where they are or what I do with them as long as they are there for events. Pretty sweet deal if you ask me.
Best part was that the museum put me in charge of saws. Basically that means I get to restore and look after almost 50 really old saws. Including 4 IEL beavers, 2 pioneer ABs , a diston da211, 5 hornets (1 man and two man), several big pm muscle saws including the pm 270 and 276, atleast 4 PM universals, several six cube Mcculloch, close to 6 IEL super pioneers, and a ton of other large felling saws, and atleast 10 two man's.
Each even better part? They put aside a trailer to store all the restored saws, including my own collection. I can also have any of the saws come and go as I please, to work on or use. I could go in and take 3 IEL beavers for a month if I wanted. I can also take parts from any of the saws I need to. Basically, I got 50 vintage saws, and unlimited storage today. Even though they are technically still the museums, I am the only one who runs them or works on them, and I can take them whenever I want to for as long as I want to. They dont care where they are or what I do with them as long as they are there for events. Pretty sweet deal if you ask me.
Shouldn't have mowed the back yard! Hit a nasty bump,jarred the living chit out of me ! Could be a rough night.
Camper pix. LOL Last pic is the crap I tore out of the first one,so far !
Last edited:
A real clean homelite xl103 there on a shelf. No historic value for a museum... I think it will join my firewood team. :msp_w00t: Go nicely with the super ez.
From now on, I will only be keeping my users here, all the collectors saws will be stored at the museum. My using team consists of a super ez, 034, farmsaw, husky 136, and I will add that xl103.
14 saws I don't have to have taking up space in my shop... The nice thing is I can borrow a 7.7 cube iel jb with a 48" bar whenever I need something real big cut.
From now on, I will only be keeping my users here, all the collectors saws will be stored at the museum. My using team consists of a super ez, 034, farmsaw, husky 136, and I will add that xl103.
14 saws I don't have to have taking up space in my shop... The nice thing is I can borrow a 7.7 cube iel jb with a 48" bar whenever I need something real big cut.
jimdad07
Addicted to ArboristSite
Hey John !!!
The homemade forge on it's first test run .
That is pretty cool Dan, can't wait to see what you make.
