Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
BigDaddyR
Addicted to ArboristSite
That was the main problem you were concerned with so hopefully the rest will be good sailing.
Yeah, we have some really helpful members on this site.
Like there is ANY chance you wont !
With enough work and parts just about anything can be made to run again.
And a little know how ! :msp_wink:
BigDaddyR
Addicted to ArboristSite
Okay had a win tonight. Got the rear handle for the 55cc Craftsman and put it on tonight. Actually figured out that the throttle cable was slightly binding and causing the carb to not be able to return to idle before I had everything together. Figured out a better way to route the cable so the idle cam was resting on the idle screw like it's supposed to in the pictures I took of it before disassembly. It's a win because I didn't get it all together and running before listening to it race before figuring it out. Only had to loosen the AV screws to reposition the cable
Got it all back together but too late to test start it and tune it tonight.
Got it all back together but too late to test start it and tune it tonight.
Yep , lots of them will go out there way to help ! Some real great people on AS !
BigDaddyR
Addicted to ArboristSite
This is true. Speaking of which has anyone heard anything out of Scooterbum lately. Haven't seen him post in a while and hoping he'd doing okay.
Okay had a win tonight. Got the rear handle for the 55cc Craftsman and put it on tonight. Actually figured out that the throttle cable was slightly binding and causing the carb to not be able to return to idle before I had everything together. Figured out a better way to route the cable so the idle cam was resting on the idle screw like it's supposed to in the pictures I took of it before disassembly. It's a win because I didn't get it all together and running before listening to it race before figuring it out. Only had to loosen the AV screws to reposition the cable
Got it all back together but too late to test start it and tune it tonight.
Feels good to get one going don't it !
Nope ? Hope hes just real busy.
Well maybe,...just a tad.
I seldom ask but when I do there are a lot of fellers that will help out.
BigDaddyR
Addicted to ArboristSite
It does feel good to make progress.
Well see if it's running tomorrow:wink2: Fuel it up and give it a shot. I have some other things I want to work on now but it's been a good learning experience. I can honesty say very crappy engineering on a lot of the way things are put together on it esp the choke spring setup. As long as I can tune it and it's running good then I'm happy. Hopefully it won't still be bogging down and dying after the 3rd cut. If so then I guess it's time to look at tank vent.
Time:
Nite Jerry
Well , the rain stihl aint slackin .
