Sure is quiet in here....do I need to start a fight?

[roncoinc]

Yawn,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,.................................. scritch,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,scritch................................scatch.....................

mmmmmmmmmmmmm,,,,,,,,,,,,,,,,,,,,,,,,,....................... dark roast expresso........................

 

[roncoinc]

I see Schoot down there !!!!!!!!!!!:msp_w00t:

 

[IEL]

Morning guys.
I can't think of anything else to say.. :msp_sad:

 

[roncoinc]

Morning guys.
I can't think of anything else to say.. :msp_sad:

How many of those 18 saws in your sig can you put fuel and oil in,start right up and go cut wood ?

 

[roncoinc]

bacon !!!!!!!!!!!!!!!!!!!!!

 

[IEL]

Either 7 or 8 are ready. One or two more might run, I just haven't tried any others yet. I have my 4 saw running team, the rest I just restore and start for fun. All but 4 are from the 1950s- early 1970s...
I used to have one or two more runners, but they are torn down for a new paint job.
In fairness, I did get 6 project saws last month.... LOL

 

[tbone75]

Super Slug checking in.

Watched a few movies last night with the OL . One new one out was really stupid ! The Employer , had a couple bigger named actors in it , thought it may be good. NOT ! LOL I should look them up before I buy them ! LOL I see a title that looks good , and go fer it. LOL
Couple others I don't member the names of already ? LOL
Don't watch much TV , but I do like movies. LOL

 

[tbone75]

Just so JimBob don't get over excited , none of the movies are rated over " R " . LOL No X movies . LOL

 

[jimdad07]

Just so JimBob don't get over excited , none of the movies are rated over " R " . LOL No X movies . LOL

I am limited to the National Geographic channel for that stuff.

 

[tbone75]

I am limited to the National Geographic channel for that stuff.

That is really sad ! :msp_w00t:

 

[tbone75]

Took the midget cat for a walk . The humidity is unreal out there ! Won't be outside much today !

Rained like a beach last night , sun is shining now ! Chance of storms all week again . :msp_razz:

 

[BigDaddyR]

Just got going, delivered some camp wood to the neighbors down below and got drenched coming back. Suns going to pop out again soon. Guess I'll let the water drain off and dry up a bit before I go over to the other neighbors and noodle some of the bigger rounds into splitable pieces. Darn, guess I'll have to work on saws:wink2:

 

[IEL]

Just called the fire supply place the next town over. They have rebuilt 10# & 15# co2 units in stock. Im just getting another co2, and using a bucket or hose for cooling hot metal or putting out the lawn. Once they call me back with the price, I will be riding a 12 mile round trip on a bicycle in a heat wave.... With an extinguisher ratchet strapped on the back.... I refuse to use dry powder in the shop... The mess would be almost as bad for my tools as the fire.....


Plus if your really thirsty in a heat wave, they can cool a warm six pack to ice cold in 10 seconds. Might not be worth the $20 recharge... LOL

 

[BigDaddyR]

Best way to test a coil off the saw? Checked the stop switch and it's working. Just looking to see what range the resistance or impedance should be in for a good coil.

 

[roncoinc]

Just got going, delivered some camp wood to the neighbors down below and got drenched coming back. Suns going to pop out again soon. Guess I'll let the water drain off and dry up a bit before I go over to the other neighbors and noodle some of the bigger rounds into splitable pieces. Darn, guess I'll have to work on saws:wink2:

Why you have to noodle if you have a splitter ??

bring splitter over there and roll them over to it,,stand them up on the base and split !!

 

[roncoinc]

Best way to test a coil off the saw? Checked the stop switch and it's working. Just looking to see what range the resistance or impedance should be in for a good coil.

Aint any really good way to check a coil.
if you had a good one of excact same could compare restisance reading but that dont account for physical breakdown if the insulation and such.

 

[tbone75]

Best way to test a coil off the saw? Checked the stop switch and it's working. Just looking to see what range the resistance or impedance should be in for a good coil.

No idea how to test a coil , other than checking for spark. Or they quit when the get hot.

Someone may know ? Would like to know if it can be done myself !

 

[tbone75]

Why you have to noodle if you have a splitter ??

bring splitter over there and roll them over to it,,stand them up on the base and split !!

That is the easy way ! Unless ya can't get the splitter to the wood. I took my FILs splitter right into the woods,hooked it up on the back of a mower or my 4 wheeler. LOL

 

[tbone75]

Got my CBN grinder wheels today ! My new grinder will be here later today ! Sure hope there worth the money ? LOL

May have to go dull a chain to try them out ? LOL

 

[jimdad07]

No idea how to test a coil , other than checking for spark. Or they quit when the get hot.

Someone may know ? Would like to know if it can be done myself !

I always checked them with an ohm meter, I stopped when a couple of them tested ok but didn't work.