Sure is quiet in here....do I need to start a fight?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Well.........My only child........if she can start it.....she can ride it......she'll probably end up with it anyway..........actually her mother is the only female I ever let ride my Panhead......and the only others were two males......one sold me my first Harley...the other has ridden and acted bad with me for yrs....was my best man at my first wedding....




:clap:
 
I bet I have dropped more bikes than anyone else on this thread.....LOL....:(

My worst spill was right here in my basement ! Trying to move the old gold wing around and slipped ! Knocked me into the fridge down there , split my eyebrow open. Black eye for a few days too. LOL Crash bar saved my leg from getting smashed. LOL That ol thing was heavy !
 
Probably so....... I haven't dropped more than 3 or 4 bikes.......but I bet I hold the record for falling off the same one so many times......been at it for 35 yrs on this one.....just absolute shear luck I'm here to type this...

You can`t push a bike beyond its limits many hundreds of times without loosing it once in a while, wears out knee slides as well.
 
My worst spill was right here in my basement ! Trying to move the old gold wing around and slipped ! Knocked me into the fridge down there , split my eyebrow open. Black eye for a few days too. LOL Crash bar saved my leg from getting smashed. LOL That ol thing was heavy !

The bigger the bike the heavier they are. Been under a few in my time but an XS1100H gave me my worst beating.
 
" some " people were thinking about him ??

maybe you missed some post's but almost all of us have mentioned at times his absence...

so next time include us ALL !!! :)

glad you made contact and let us know,,so often good members make friends,,then go away..... :(

:msp_sad: and I thought I did good. He got the point like I said and I think it lifted his spriits.

Oh and I did mention you by name, :msp_thumbsup: and told him you love all Steels now:msp_wink:
 
I bet I have dropped more bikes than anyone else on this thread.....LOL....:(

More bikes or motorcycles ?? :)

if "bikes" probly !!

if motorcycles,,do parkin lots,campgrounds,party areas,driveways,beaches,,logging roads,,yard at home,,etc count or just on the road ??

i had times i wanted to go for a ride,,got on,fell over,woke up in the mornin all skeeter bites wondering why i was under the machine smellin of gasoline ??

do those count ?? :)

fallin off in front of a bar and having somebody drag you out from under and bring you home and leave you on the lawn and the cycle on it's side all nite next to the sidewalk count ??

let's see,,how many weeks in a summer times how many summers times how many years ?? LOL !!

one time a GF and i were ,,uh,,,well,,,getting " involved " on the seat of a shovel and it fell over on BOTH of us,,and the pipes STIHl hot !!,, we both got burned :(

does THAT count ??

my guess,,,300 times ??
 
Jerry, am I correct in my understanding that an epoxy primer followed by a marine grade polyurethane color is the best finish for a saw? Any tips for prepping magnesium for paint? I'm thinking oven cleaner, followed by brake cleaner, and a final wipe down with xylene or toluol before painting. That should clean the oil out of the pores, right?

When we are getting paint mixed for the tractor, I will see what they have for marine coatings. There is an industrial plastic/resins/composite/paint supplier local, If they don't have it, no one will. I am sure they will cost a small fortune per can, but I bet one quart would do quite a few saws.
 
:msp_sad: and I thought I did good. He got the point like I said and I think it lifted his spriits.

Oh and I did mention you by name, :msp_thumbsup: and told him you love all Steels now:msp_wink:

You DID do good,,thank you..

and doo,doo on you for the steal remark !! :msp_sneaky:
 
My worst spill was right here in my basement ! Trying to move the old gold wing around and slipped ! Knocked me into the fridge down there , split my eyebrow open. Black eye for a few days too. LOL Crash bar saved my leg from getting smashed. LOL That ol thing was heavy !

My dad dropped his over on himself in the driveway and was barely able to reach his phone to call my Mom out to help. Luckily he had his helmet on already and cracked it against the concrete drive and not his nug. Was able to get it off himself by the time she came out and she helped him pick it back up.

Got on it and rode it to work, now that's what I'm talking about. He got a ticket when I was younger and they were stationed in different states for doing 110 in the rain on an old Honda 650. That's my Dad! Still tells my Mom the radar must have been messed up due to the rain. I call BS.
 
Jerry, am I correct in my understanding that an epoxy primer followed by a marine grade polyurethane color is the best finish for a saw? Any tips for prepping magnesium for paint? I'm thinking oven cleaner, followed by brake cleaner, and a final wipe down with xylene or toluol before painting. That should clean the oil out of the pores, right?

When we are getting paint mixed for the tractor, I will see what they have for marine coatings. There is an industrial plastic/resins/composite/paint supplier local, If they don't have it, no one will. I am sure they will cost a small fortune per can, but I bet one quart would do quite a few saws.

HEAT is a good way to get the oil out...

then clean it while stihl hot or warm..

porouse metal can trap oil,,heat opens the pores..

can get tricky but a lot of people have success lots of diff ways..

a USC that has heat works good also..
 
The bigger the bike the heavier they are. Been under a few in my time but an XS1100H gave me my worst beating.

The old wing was a 1976 all stripped down. No bags or anything. Made it look a little better. LOL

I stihl picked the OL up that day and went for a ride. LOL Surprised she got on there after looking at me. LOL We were stihl dating at the time.

I know its a Jap bike , but it was cheap and ran great ! LOL
 
Jerry, am I correct in my understanding that an epoxy primer followed by a marine grade polyurethane color is the best finish for a saw? Any tips for prepping magnesium for paint? I'm thinking oven cleaner, followed by brake cleaner, and a final wipe down with xylene or toluol before painting. That should clean the oil out of the pores, right?

When we are getting paint mixed for the tractor, I will see what they have for marine coatings. There is an industrial plastic/resins/composite/paint supplier local, If they don't have it, no one will. I am sure they will cost a small fortune per can, but I bet one quart would do quite a few saws.

I boil all my mag parts in soapy water for at least one half hour, then boil in clean rinse water another 5-10, change water out about 2-3 times. Spray down with brake cleaner and apply primer immediately. Can`t let bare clean mag set even 10 mins after cleaning,it starts to corrode immediately. Yep , prime with black epoxy primer first thing. Top color can go on even days later. Just lightly rub primer over with fine industrial grade Scotchbrite before laying on color.
 
More bikes or motorcycles ?? :)

if "bikes" probly !!

if motorcycles,,do parkin lots,campgrounds,party areas,driveways,beaches,,logging roads,,yard at home,,etc count or just on the road ??

i had times i wanted to go for a ride,,got on,fell over,woke up in the mornin all skeeter bites wondering why i was under the machine smellin of gasoline ??

do those count ?? :)

fallin off in front of a bar and having somebody drag you out from under and bring you home and leave you on the lawn and the cycle on it's side all nite next to the sidewalk count ??

let's see,,how many weeks in a summer times how many summers times how many years ?? LOL !!

one time a GF and i were ,,uh,,,well,,,getting " involved " on the seat of a shovel and it fell over on BOTH of us,,and the pipes STIHl hot !!,, we both got burned :(

does THAT count ??

my guess,,,300 times ??

Motorbikes, I likely dropped a motorbike 20-25 times in an evening. Hill climbing with rear paddle wheel, most climbs end in dropping the bike. Did that for 7 years,60-90 nights in each year....LOL
 
I would have rode a lot more if I had quit drinking a long time ago. LOL

Learned no to have very many riding ! Last time I did that,took me 1-1/2 hrs to get 12 miles home ! LOL Never put it down , just very close many times ! Could have got home faster walking ! LOL That was then end of riding and drinking ! LOL
 
I would have rode a lot more if I had quit drinking a long time ago. LOL

Learned no to have very many riding ! Last time I did that,took me 1-1/2 hrs to get 12 miles home ! LOL Never put it down , just very close many times ! Could have got home faster walking ! LOL That was then end of riding and drinking ! LOL

Leave the drinking til after the ride.....:msp_thumbsup:
I rode from the time I was 13 til around 35-36, was on some type of motorcycle almost every day, usually several on each day. Build, compete, race,tour and just ride for fun. On and off road, track and trail...LOL
If it had two wheels I was on it and having fun. Had my YZ 250 12' up in the air.
 

Latest posts

Back
Top