Shouldn't it stay centered in the clutch half?
Planned on heatin flywheel side so case slides off the bearing
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
Shouldn't it stay centered in the clutch half?
Planned on heatin flywheel side so case slides off the bearing
BigDaddyR
Addicted to ArboristSite
Okay. Success!!
Got the 45 together! Popped in about 6 pulls. Feels really strong. Started and ran well. Tiny tweak of idle to keep going. Ran till warm. Good throttle response. Won't hit WOT until I get clutch/b/c on it. Still need exhaust gasket-thought I had, washer I'll get local and 3/8 Lo Pro rim. I'll check compression to have. Baseline once its cool.
A little fuel came from the tank vent. Guess I better make sure nothing's missing there.
Always something.
Rick
Got the 45 together! Popped in about 6 pulls. Feels really strong. Started and ran well. Tiny tweak of idle to keep going. Ran till warm. Good throttle response. Won't hit WOT until I get clutch/b/c on it. Still need exhaust gasket-thought I had, washer I'll get local and 3/8 Lo Pro rim. I'll check compression to have. Baseline once its cool.
A little fuel came from the tank vent. Guess I better make sure nothing's missing there.
Always something.
Rick
Should be just fine.
Jimmy in NC
Addicted to ArboristSite
Shod be fine....I just err to the side of caution. Gasket set with seals.... $10.00. That O-ring is only $1.00 .....heck....send me your address I'll mail you one.
Really have nothing to loose leaving it in the one side....curious how it turns out. I'm no expert...only split two of them so far!
AU_K2500
NSM
Hey Uncle Mongo!!!
- Joined
- Feb 17, 2009
- Messages
- 16,767
- Reaction score
- 16,090
- Location
- Beautiful Rockbound Coast of Maine
Been a funny day......went to the shop early this morning to work on the blue brick.....power went off for 2 1/2 hrs...couldn't see to work on the car so sat in the office thumbing through my 2,000 page marine "Wish Book".....power came back on....managed to R&R the two rear rubber brake lines.....started all the metal lines and lock nuts....pulled the calipers and pads.....calipers didn't retract smoothly at all...very "hitchy"....ordered new ones, new shocks and a couple rubber exhaust hangers that I noticed were cracked too....not as much progress as I had hoped on my day off...but progress none the less..just gotta fix everything I see that is even questionable....gonna be a real nice brick when I'm done.....someday...
AU_K2500
NSM
Oil has been drained and all is right with the world.
Had to take it around the block!!
Had to take it around the block!!
My brother called and made my day!
Him and the youth group from church cut split and stacked wood for a needy family today!!
He said that there was a pile of large logs and the ol'268 destroyed the pile in no time!
Told me that my saw saved the day!
Makes me feel good!
Can't get the smile off my face!!
Him and the youth group from church cut split and stacked wood for a needy family today!!
He said that there was a pile of large logs and the ol'268 destroyed the pile in no time!
Told me that my saw saved the day!
Makes me feel good!
Can't get the smile off my face!!
roncoinc
Official Stihl Disser
Shop smell's MUCH better today..
had an oh38 stupid sitting on the back shelf for about 1 1/2 yrs or so,maybe two ??
bot $20 of parts for it,fuel line,impulse line,fuel filter.
would hear from the guy once every 6 months or so.
he showed up today,paid me for the parts and i sent him home with the saw !!
told him i didnt want to work on it.
If i never see another creamsickle it will be to soon for me !!
had an oh38 stupid sitting on the back shelf for about 1 1/2 yrs or so,maybe two ??
bot $20 of parts for it,fuel line,impulse line,fuel filter.
would hear from the guy once every 6 months or so.
he showed up today,paid me for the parts and i sent him home with the saw !!
told him i didnt want to work on it.
If i never see another creamsickle it will be to soon for me !!
- Joined
- Feb 17, 2009
- Messages
- 16,767
- Reaction score
- 16,090
- Location
- Beautiful Rockbound Coast of Maine
U don't REALLY meen that...doo U??
Shop smell's MUCH better today..
had an oh38 stupid sitting on the back shelf for about 1 1/2 yrs or so,maybe two ??
bot $20 of parts for it,fuel line,impulse line,fuel filter.
would hear from the guy once every 6 months or so.
he showed up today,paid me for the parts and i sent him home with the saw !!
told him i didnt want to work on it.
If i never see another creamsickle it will be to soon for me !!
OH-Five-SIX MAG II
roncoinc
Official Stihl Disser
In a box hiding,,sometime when i feel so good i feel guilty i will dig it out so i can feel bad
041super hiding in a box UNDER the shop so it dont sthink !
In a box hiding,,sometime when i feel so good i feel guilty i will dig it out so i can feel bad
041super hiding in a box UNDER the shop so it dont sthink !
Hey Ron. Get an email?
roncoinc
Official Stihl Disser
Yes i did,,got paypal ?
Hopefully the roof stuff is done , chimney has been secured and a suprise plumbing leak has been dealt with .
roncoinc
Official Stihl Disser
You get my email i just sent ??
