Sure is quiet in here....do I need to start a fight?

[pioneerguy600]

Real nice beach day here, it would be a beach to be there!!

 

[Cantdog]

Got a Jimmy Box the other day......I think the boy packed it for him.......Thanks guys!!

 

[Cantdog]

About halfway through the storm I guess.......ventured outside for a minute.....didn't like it all that much......

 

[cheeves]

We have a weather event coming but just have to wait and see. The sun made it a little more bearable this afternoon for a while but now its getting colder again as the sun gets lower. This is true winter weather, we got off easy the first half also. Good to hear from you Bobby, hope all ios well with you and yours.

Same with you Jerry!!!

 

[cheeves]

About halfway through the storm I guess.......ventured outside for a minute.....didn't like it all that much......

View attachment 557868 View attachment 557870 View attachment 557871 View attachment 557872

NOAA Mosaic Radar shows you getting globbered rt now! Storm seems to be stalled up near PE and NS! Looks like we got more than you! LOL from last 2! We're about done I hope Tides 12:51 but there's lake affect moving in from WNW. 9WC winds still blowin'.
Have a flock of Turkeys out here hangin' around for some seeds ect and to shelter from the wind and snow!

 

[cheeves]

About halfway through the storm I guess.......ventured outside for a minute.....didn't like it all that much......

View attachment 557868 View attachment 557870 View attachment 557871 View attachment 557872

NOAA Mosaic Radar shows you getting globbered rt now! Storm seems to be stalled up near PE and NS! Looks like we got more than you! LOL from last 2! We're about done I hope Tides 12:51 but there's lake affect moving in from WNW. 9WC

Real nice beach day here, it would be a beach to be there!!

Waves 25ft down Plymouth Beach.

 

[cheeves]

Rock & Roll out there at the moment .

Hoochie Koo!!

 

[dancan]

 

[dancan]

 

[Cantdog]

OOOOOooooffffffff!!

 

[dancan]

Nice and toasty warm in the house on this Stihl cut wood

 

[pioneerguy600]

Same here, Stihl cut wood much betterer than the soggy Husky cut wood.

 

[cheeves]

OK.....storms over here! Started about 2 yesterday with like an interval from 3 to 5 AM! Just wind......

 

[cheeves]

Same here, Stihl cut wood much betterer than the soggy Husky cut wood.

Like my 262 though!

 

[cheeves]

Like my 262 though!

But you do have these 026's down to a Science!!
God Bless you for that!! Got 15 loads before the snow flew.....90% with your 026! With my back no way I'd gotten 15 loads without "Mighty Mouse!"
Got some Woodland Pro chisel for it and put it on the Belsaw without even using it! Filed the rakers down some and that saw just eats wood! All dead standing Oak!

 

[pioneerguy600]

I cut the wood I am burning this winter more than a year ago, wood has dried two summers, with my Stihl saws. This summer/early fall I cut some wood up at the camp with the lil Husky 45, that wood is still really green n wet, not good burning right now.

 

[cheeves]

I cut the wood I am burning this winter more than a year ago, wood has dried two summers, with my Stihl saws. This summer/early fall I cut some wood up at the camp with the lil Husky 45, that wood is still really green n wet, not good burning right now.

Lucky.....around here in the woods left there's an abundance of dead standing oak. What I mostly burn! This fall found a nice Honey Hole that I worked. Still some left.....But you really gotta search now. Good thing I know the area!! Largest County in Mass.......which ain't sayin' a lot!

 

[pioneerguy600]

But you do have these 026's down to a Science!!
God Bless you for that!! Got 15 loads before the snow flew.....90% with your 026! With my back no way I'd gotten 15 loads without "Mighty Mouse!"
Got some Woodland Pro chisel for it and put it on the Belsaw without even using it! Filed the rakers down some and that saw just eats wood! All dead standing Oak!

If you like that saw Bobby you wouldn`t believe the one I am running now for personal use. The latest one I have been experimenting with has a very substantial gain over the older saws I ported. This porting stuff never stops evolving and we are never satisfied just leaving things as they are. I have a good number of 026`s out there being test run and the consensus is they do a good job and are holding up really well. Very happy to hear yours is still doing its job and treating you well.
I want to continue running my latest build til it proves whether the saw can stay together running at the RPM`s it does. It has about 30 hours on it now and never ceases to impress me. There is another saw porter over State side that likes porting on these 026`s and we compare notes and share improvements between us. When I do a compare a stock 026 to the one I run now there is a wide/huge power and speed difference. Dan and I have cut off a good deal of wood this past year and the 026`s have done the majority of the cutting for me, I use these saws now for wood I would have run bigger saws on before the improvements that have come about by experimenting.

 

[pioneerguy600]

Lucky.....around here in the woods left there's an abundance of dead standing oak. What I mostly burn! This fall found a nice Honey Hole that I worked. Still some left.....But you really gotta search now. Good thing I know the area!! Largest County in Mass.......which ain't sayin' a lot!

We cannot keep up with the firewood cutting and clearing jobs coming our way lately, there is already more standing dead than we can handle with more showing up daily plus all the building lot and powerline/road clearing jobs, nothing but fun, fun ,fun!

 

[cheeves]

Lucky.....around here in the woods left there's an abundance of dead standing oak. What I mostly burn! This fall found a nice Honey Hole that I worked. Still some left.....But you really gotta search now. Good thing I know the area!! Largest County in Mass.......which ain't sayin' a lot!

If you like that saw Bobby you wouldn`t believe the one I am running now for personal use. The latest one I have been experimenting with has a very substantial gain over the older saws I ported. This porting stuff never stops evolving and we are never satisfied just leaving things as they are. I have a good number of 026`s out there being test run and the consensus is they do a good job and are holding up really well. Very happy to hear yours is still doing its job and treating you well.
I want to continue running my latest build til it proves whether the saw can stay together running at the RPM`s it does. It has about 30 hours on it now and never ceases to impress me. There is another saw porter over State side that likes porting on these 026`s and we compare notes and share improvements between us. When I do a compare a stock 026 to the one I run now there is a wide/huge power and speed difference. Dan and I have cut off a good deal of wood this past year and the 026`s have done the majority of the cutting for me, I use these saws now for wood I would have run bigger saws on before the improvements that have come about by experimenting.

What oil you run? Run Amsoil 40:1 with Startron!
Have any latest production you want to sell?
My old Orange Top 44 in Ohio ran 14,800 for ten years! Ran Golden Spectro in it! Just finally found one. Been looking for 35 years! But it doesn't run like my old one! Little disappointed tell yah the truth. If I didn't have your saw would probably be bummin'! LOL